Collection of PTFE-style filament holders
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple spool holder for top or sides. (way better then the bearing thingies)
- Rating
- 5 / 5
- Likes
- 59
- Downloads
- 313
- Makes
- 6
- Views
- 2,222
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
see credits.
Also spools on these dont free spin so you dont get a tangle mess.
02.12.22 added Steves side mount for Voron spoolholder
20.09.22 added small side mount and retainer
30.08.22 just some new photos for side mounting since I needed a new. Still works like a champ
13.02.22 updated spoolholder radius on the top section to prevent the spools from rubbing on the printed parts
19.01.22 added sidemount option for anything. (shelf in my case)
Printsetting
(recommended, but feel free to adjust)
Perimeter: 3+
Top/Bottom: 5
Layer Height: ~0.3 (0.2 is fine to but takes way longer)
Infill: 31% Gyroid or 42% Grid, dont cheep out
Assembly
- push the two parts together
- stick a part of 3mm PTFE (the cheap white hard ones) in the holes of the spool holder
Credits
https://github.com/VoronDesign/Voron-Switchwire
https://github.com/boubounokefalos/Ender_SW
https://github.com/VoronDesign/Voron-2/
hymness1 VS.182 (Patrice#2063) @ Voron Discord
SteveBuilds @ YT / Voron Discord
https://github.com/VoronDesign/VoronUsers/blob/master/printer_mods/StvPtrsn/