1 / 11
Collection of PTFE-style filament holders — zdjęcie 1
1 / 11

Collection of PTFE-style filament holders

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple spool holder for top or sides. (way better then the bearing thingies)

Ocena
5 / 5
Polubienia
59
Pobrania
313
Wydruki
6
Wyświetlenia
2222
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

see credits.

Also spools on these dont free spin so you dont get a tangle mess.

 

02.12.22 added Steves side mount for Voron spoolholder

20.09.22 added small side mount and retainer 

30.08.22 just some new photos for side mounting since I needed a new. Still works like a champ

13.02.22 updated spoolholder radius on the top section to prevent the spools from rubbing on the printed parts

19.01.22 added sidemount option for anything. (shelf in my case)

 

Printsetting 

(recommended, but feel free to adjust)

Perimeter: 3+

Top/Bottom: 5

Layer Height: ~0.3  (0.2 is fine to but takes way longer)

Infill: 31% Gyroid  or  42% Grid,  dont cheep out

Assembly

  1. push the two parts together
  2. stick a part of  3mm PTFE (the cheap white hard ones) in the holes of the spool holder

 

 

Credits

 

https://github.com/VoronDesign/Voron-Switchwire

https://github.com/boubounokefalos/Ender_SW

https://github.com/VoronDesign/Voron-2/

hymness1 VS.182 (Patrice#2063) @ Voron Discord 

SteveBuilds @ YT / Voron Discord

https://github.com/VoronDesign/VoronUsers/blob/master/printer_mods/StvPtrsn/

 

Tagi