Counting matching models…
I designed this rear mudguard to suit my Specialized Levo Comp Alloy (2022 “Gen 3” model). It also happened to fit my Stumpjumper EVO Comp Alloy (2023 model) nicely as shown in the photos. It's printed as 2 parts, and I recommend printing…
I made this tube rear bumper bar for my SCX6 to suit the Pro-Line Racing Cliffhanger body. It's designed to be similar in styling to the tube front bumper file offered by Pro-Line on their website. I've also included it here too for…
UPDATE: Added 3 smaller nozzles that require less filament. <<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>> Second update: I purchased a tube of Loctite brand plastic glue and compared the strength to the Bostik glue. Check out my other…
I wanted to mount everything between the frame rails to keep the truck narrow for competition crawling, so this is just a simple bracket to mount the transmission shift servo in a better location. The metal rod that hooks to the…
I purchased some genuine Axial SCX6 body mounts to go with my Pro-Line Racing Cliffhanger body. The body mounts turned out to be a bag of junk, so I decided to design and print my own mounts instead. I designed these for use with the…
This is a simple storage box to hold an Axial SCX24 (Deadbolt wheelbase). It is based around another SCX24 stand that I designed (see my other models). It also incorporates a storage area below the crawler for storing small objects such…
This is a remix of the Big Einsy Case (Version 20.04.23) by creator "Boogie". I have added a removable opening to allow access for a Raspberry Pi Zero /Zero 2 etc- Requires 2x M3x8mm screws + square nuts. I also increased the amount of…
I use a Raspberry Pi 5 as a media player when travelling, so I needed a way to power it from a 12 volt power source while off grid. I chose the 52Pi PD power expansion board as it allows you to power a Raspberry Pi 5 utilising 9-24v input…
This is a phone holder that I designed for my 2013 Nissan Navara D40 centre console cup holder. It suits the 2010 onward Spain built model that was sold here in Australia. I'd say it would most likely fit the equivalent model R51…
UPDATE: I compared the strength of this Loctite glue against Bostik “Hard plastic” glue. Check out my other model uploads for “Glue tensile strength test object” for a brief summary of my test results. Spoiler alert, the Bostik glue…
I wanted to keep a small colour sample of each filament that I use, so I designed these tiles/swatches and a box to keep them in. Most of the tiles come pre-labelled for the filament brands that I use (Esun, 3D Fillies, etc), and the…
Here is a simple stand to hold an Axial SCX24 (Deadbolt wheelbase). It also incorporates a storage area below the crawler for storing small objects such as the charger and cable, etc. It is based around the stock Deadbolt wheelbase…
I made this offroad tow hitch to tow a camper trailer behind my Cragsman. Designed to accept a Traxxas TRX-4 rod end. The lower side of the hitch has a hex opening to hold a plain M3 nut, and the pin is an M3 screw through an M3 wing nut.…
R/C crawler 2.2 beadlock wheels. Designed to work with stock Axial Wraith hubs. (May also work with Vanquish hubs??) 5 part design which can be printed without supports. 2 outer beadlock ring face styles; flat or strengthened. 4 different…
This is an alternative case to suit a JMM Solutions (Australia) soldering station with Ryobi One+ 18V battery. May also suit other T12 soldering irons. It's a great tool, but I wanted a better looking case. This design is based around one…
Extruder motor rotation visualiser- Steering wheel ripped from a Nissan D22 Navara/ Frontier 3D model. This style steering wheel has been used globally across a range of Nissan vehicles (And possibly Infinity vehicles). Has a screw hole…
I designed these stands for my crawlers so they could be stored without having weight constantly sitting on the tyres in order to prevent flat spots. These are axle specific options based around the crawlers that I own. Once printed, they…
Glue tensile strength test object I designed this object for my own testing, but thought I would share it in case anyone else could benefit from it. 2 of these objects need to be printed and glued together to form 1 test item. Background…
GME radio Push-To-Talk PTT Bluetooth button to Quadlock mount adaptor. 2 pieces that thread together to encase the PTT button which can then be mounted to a Quadlock phone mount. The top part can be printed without supports, but supports…
I made this rear skid plate/ servo guard to replace the rear bumper bar on my Cragsman in order to gain a better departure angle and help protect the rear diff lock servo. It also has a small lip to help prevent the lower edge of the body…
A simple socket to remove and install the wheel centre caps on a Traction Hobby Cragsman. Easily remove the centre caps by hand. Requires no additional tools. Printed upright with no supports or raft/brim. -If the tool is firm on the…
I designed this basic clip-on bracket so I could mount a cheap digital tacho on my Honda CB125E. The bracket is 60mm wide and clips firmly around 22mm 7/8" handlebar tubes -No screws required. I printed using PETG- 0.15mm layer height, 3…
I modelled a simple holder for the Subaru DST-i diagnostic interface which I mounted to the side of one of my tool cabinets. It has 2 mounting holes which are 25mm between hole centres, and are 6mm in diameter. I'm not sure how many…
This is just a basic spacer to fit the steering knuckles on the Cragsman. The spacers are used when running a high steer setup (Steering tie-rod on top of the knuckles for better ground clearance). 2 spacers are required per vehicle/ one…
I replaced the stock ESC in my Cragsman with a Holmes BR-Mini ESC, so I designed this retaining clip to hold the wires in place against the battery tray. It also has a small tab to hold the receiver lead plug in place. You will need to…
These are all currently available results.
