Counting matching models…
Originally I have designed this to hang the broom at the wall but this mount can also be useful to attach any tools with cylindrical handles. I know it sounds a lot easier just to drill a hole to the broom handle and hit a nail into the…
Designed to attach the thinner Wago 221 junction boxes to anywhere using M3 countersink bolts. There is a 2.2 mm diameter hole on the back of the mount parts so you can merge them by using the standard 1.75 mm diameter filaments. I have…
I have designed these dispensers to use my batteries in first in - first out order. You can stand these up on the table, or hang up using a standard 4 mm countersank screw or attach their back to anything using glue or 3M's Command Tape…
Hang any soft stuff to anywhere using these clips! Printing I have exported two sizes but the design is parametric so you can make your own version ( d_clip is the only parameter you have to adjust) to achieve maximum stiffness print the…
A cheap solution to your "under the desk cable cluttering" issues. Just mount a DIN rail to the bottom of your desk and arrange these mounts on it to hold your cables neatly. I could not find any nice and cheap cable management solution…
Slim mount for Wago 221-41* wire connectors on the standard DIN rails. These models are perfect as leftover or wiping tower models. Update #20230417: added double and triple versions. Update #20240922: uploaded Fusion 360 source file.
This is a remix of Jonathan's great foldable mobile stand. Mine is a bit thicker and the dimensions are matching with the standard credit card (=85.6x54.0 mm). The model is pre-assembled. Depending on the calibration of your printer some…
Put it in a glass of water and place an avocado seed into the hole. Few weeks later the seed will start growing its roots.
- 3/4" male quick fit connector - 3/4" female quick fit connector - 3/4" - 3/4" pipe joiner All parts are designed for an european household hence built with 3/4" BSP threads (=3/4" and 14 TPI (male part OD is 26.441 mm or 1.04")).
Designed to store AA/AAA batteries in a protected shell. Update #2026-05-24: I have uploaded some more: the STL for the 18650 batteries the Fusion 360 source files for all versions
This is a collection of the parts I have designed during the build of my 350^3 mm VORON 2.4 3D printer. I have designed them using Fusion 360. The build log post available here (sorry it's in Hungarian only):…
Although KitchenAid stand mixer is coming with an acrylic cover it does not protect you properly from nasty splashes when you mix on the highest speed (e.g. making whipped cream or butter). This is a dead simple splash guard for the 4.8 l…
24 mm masking tape is the perfect kitchen accessory for labeling food in the freezer. They don't come off easily. I'm using several rolls with different colors in the kitchen. This tool is a tape dispenser with a built in hole to a…
This is the standard GoPro quick release clip with a built-in locking mechanism -single print, no assembly needed. I have used James Rogers's model from GrabCAD.com ( https://grabcad.com/library/gopro-quick-release-mount-standard ). Print…
I have designed these tool mounts to maximize storage space on my IKEA SKADIS board. Fusion 360 source file included so feel free to make one which fits to your needs.
The suction holds it very steadily without any extra sealing on the edge. Proof: https://youtu.be/smAcbBiziY4 Compatible with standard 35 mm home vacuum hoses. Suction test: Printable without support. 20230506 update: uploaded Fusion 360…
This is a scanner stand for mobile phones. Cut a standard 25 mm PVC pipe to size, push it through the printed parts, lock the bottom part to the table using a bar clamp and you are done. Optionally you can put M6 nuts and bolts to the…
I hate carrying Dyson accessories while vacuuming - that's why I have designed this mount. I made two belt compatible mounts and also two more for attaching accessories directly on the vacuum cleaner's tube. Update #20230920: I have…
Requires 2.4 m filament which is ~10 turns of filament at the end of a spool with 90 mm internal diameter. Fusion 360 link of the design: https://a360.co/333jAn3
The design is not my idea - I saw it in an instagram feed somewhere and created the model based on that memory. I have tried to find the similar model on model sharing sites as well as here on printables.com but no luck so far.…
Blade lame is a tool which holds the razor blade for you while you are scoring the dough with it. This is a new iteration of my previous blade lame with longer uncovered blade length and a bit more sturdy handle. To assemble you will need…
This is a GoPro compatible tripod mount. Print instructions To assemble you will need an M5 nut a 1/4" UNC brass threaded insert Warm up the threaded insert with a soldering iron and push into its place.
This is a sturdier remix of a previous model. I have also uploaded the Fusion 360 file in case you want to alter on the design. Update #20230403: uploaded a version with DIN rail mount on its side.
Lame (/lɑːm, læm/) is a double-sided blade that is used to slash the tops of bread loaves in artisan baking. A lame is used to score (also called slashing or docking) bread just before the bread is placed in the oven. To assemble you will…
This is a strange use case: use a traditional vacuum cleaner to clean a robotic one. The official robot cleaning guide says you have to clean the dusty filter with tapwater. If you do so you close the pores of the filter by creating a…
There was no proper storage options for drill bits in my Bosch drill's Sortimo L-BOXX - but there is a hex pattern inside its top cover - problem solved.
Based on my earlier model and JiltedGeek's nice mod I have created a supersized version. You can use it loosely or lock them if your tomatoes' growth has not switched to BERSERK mode yet. The plant clip has a larger, 50 mm diameter, 4 mm…
I always wanted a spool with the following features: lightweight but still strong enough holds at least 15 m strong , thick cord can fit the thumb in the middle hole even when wearing a neoprene glove compact enough to form a loop around…
DIN rails are cheap and awesome standardized mounting solutions. This ratchet has a spring loaded DIN rail mount mechanism which makes it useful to arrange cables under the desk or anywhere else where you can attach a DIN rail. This…
This is a dead simple, palm sized watering can with extra long watering tube for accessing tight targets. I printed mine from eSUN ABS+ with 0.2 mm layers, 4 top / 4 bottom / 4 perimeter layers, 15% gyroid infill. No support neccessary.
It's a simple piece of plastic which lets you to quickly mount things to a MOLLE web using a rubber cord. Link to the Fusion 360 design: https://a360.co/2wUsndn Print instructions Make sure the object cooling fan does not blow right below…
Wago is selling their mounting solution for these tiny wire connectors but they were out of stock when I wanted to buy them. On top of that I'm pretty sure all of you guys agree there is a lot more fun iterating such a small piece of…
This is a simple, easy to apply cupboard hook.
This is a minimalist single doser container with a plain dust cap. I don't want to hold n*hundred grams of coffee beans in the grinder so the original Baratza container was a bit overkill for me. That's why I have designed this minimalist…
This is a symmetrical stand which may hold almost every mobile device from the smallest iPhone till the 10.5" iPad. compact design: only 85 mm wide easy access to home button or home bar the other side can be used as a pencil holder
This is a redesign of my previous tape dispenser. I have created a middle hole on it to be able to hold the dispenser on your thumb. The idea came from the diver's finger spool (in case if you are a diver I have an other nice model for…
This is my next mobile stand iteration which may hold almost every mobile device from the smallest iPhone till the 10.5" iPad. Features: 60° is ideal for desk stands and 45° is a perfect fit to use the mobile device on kitchen benchtops…
I hate to glue these sensors to the wall using attached double sided tapes. I'm using this minimalist mount to fix them.
This is the latest iteration of my revolving cable mount. The mount is completely modular, parts are fitting to each other with dovetails. There is a back rail which provides further support for the assembled parts. The mount has the…
This design is based on Adafruit's orginal jig: https://learn.adafruit.com/heat-set-rig I had some 3030 aluprofile pieces at home so at first I decided to fit the original design. Later on I have: changed the carriage mount dropped the…
I have designed this minimalist dovetail based box to fit a 2.5" SATA SSD with a RPi 4B in my favorite Geekworm Raspberry Pi 4 Aluminum Alloy Case. The bottom of the case has 2 pairs of holes for Stefan's M3 heat set inserts:…
New “lockpin” version is available here: https://www.prusaprinters.org/prints/55716-revolving-cable-mount-lockpin-edition Hang your frequently used cables with this mount and forget tangling! This is another iteration of my revolving…
This is a vertical DIN rail mount for MDT's amazing cookie-like KNX field devices. I'm using it with binary input modules but it is probably compatible with the rest. If not, I have uploaded the CAD file so you can alter the dimensions…
One of our client asked us to install a lamp on the suspended drywall ceiling which is normaly used on concrete ceilings. As it was impossible to mount a hanger hook on the real ceiling and the original lamp's covering cone did not stay…
This is a protective cap for DJI Osmo Action's port slot with a USB-C cutout which lets you to charge the camera while protecting the port from the weather. Usage: remove the port door from your DJI Osmo Action put the camera to its…
I remodeled AK3D's amazing drill dust collector to create an iteration in which the handle can be the dust chamber as well as the coupler of standard 35 mm vacuum cleaner tubes. I changed the diameter of the collector to 100 mm but as I…
I wanted to mount some cables to my Prusa MINI's Z alu profile using something reusable - that's how this rachet was born. The "T-nut ratchet for 30 mm alu extrusion profile.stl" contains a pocket for an M3 nut. You can fix it with a 15…
Dead simple stand for you SD cards & pendrives.
To keep your wet sharpening stone steady when in use. To assemble you will need: 4 pcs of M6x35 bolts 4 pcs big M6 washers 4 pcs M6 wing nuts 4 pcs spring washers to the bottom (optional) ~ PVC pipe with 22 mm outer diameter
Self watering pots are bloody expensive. By using this simple water level indicator and some clay balls you can convert any ordinary pot to a self watering pot. BOM: - a pot - some clay balls - some 25 mm diameter standard plastic tube…
Minimalist DIN rail / screwable mount for HomeAssistant Green server.
Eufy does not provide this flat plate for smooth flat doorbell mount. This is the cure.
We had to join 14 spot lamp wires - this custom 3D printed housing with 4x Wago 221-415 terminal blocks was the cheapest solution.
This is a strange use case: use a traditional vacuum cleaner to clean a robotic one. The official robot cleaning guide says you have to clean the dusty filter with tapwater. If you do so you close the pores of the filter by creating a…
I wanted to mount an oldie but goldie SONOS Play:1 speaker in the kitchen. A plain shelf would have done the job, but the cable mess would not have disappeared - that's why I have designed this one. I have uploaded two helper items too:…
This is a compact wall mount with cable reel for Amazon Echo dot. I made three versions compatible with these power supplies: Amazon's cube USB power plug Amazon's other USB power adapter Apple's compact USB power plug Print with support.
DIN rail clip was designed by VORON Trident project. The original DIN rail mount for Wago's 221-2411 connector was designed by somebody else. I tried to figure out the source but I couldn't find it - maybe it was OV1A's design from here:…
Yet another GoPro quick release mount.
This is a simple connector designed to a friend of mine to connect a 1/2" BSP thread on a magnetic valve with 1/2" plastic dripping tubes.
Coffee lovers, unite!
This is a parametric design: https://a360.co/2REUcy9 I have exported boxes with different height from 10 to 90 mm in 10 mm increments.
The C legs of the relays in our ABB SAH/S KNX switch actuators has 6.35 mm spacing. Unfortunately the manufacturer does not provide a bus bar so we have to join the C legs with wires. This tool is designed to make our work easier: the…
The design is parametric. I have uploaded the Fusion 360 CAD file in case you would like to alter the model.
This is a cute colorful buckle to your ninja black tactical backpack. 5.11 Rush backpacks are equipped with useful compression straps but in most cases I don't use them. When they are not in use these straps are in the way of the main…
I have an IKEA SAMLA board hanging on my study's wall for KNX hardware test. The board has DIN rails which is a perfect mounting solution for most of the devices - except the pushbuttons which require a round electrical device box. I did…
The best way to write the contents of the storage bags/boxes/etc. you put to your freezer is to use the thinnest painter's masking tape - they will stick and hold properly in the -18 ℃ environment. The STL was generated to hold 2 pcs of…
I have been looking for a small, pocketable ruler with 71 mm pitches to make my job easier when I have to mark two 68 mm round fitting boxes in the middle of a wall. The markings on the top of these rulers are spaced equally 35.5 mm from…
Anker's GaN chargers are my favorit. As they are quite slim I thought it might be a good space-saver idea to make a wallmount. I put two standard countersunk holes on its middle but you can securely mount them using 3M's command tapes as…
Inspired by @dp_makes's model. I have remodeled it and changed a few things: added two 6x6 mm cylindrical neodym magnets for holding the tape mount on metal surfaces e.g. frdiges added a slight brim on the bottom to prevent the tape roll…
Spider Holster has an amazing quick release backpack adapter https://spiderholster.com/product/spiderlight-backpack-adapter/ which comes with a GoPro quick-release shoe. I wanted to avoid using multiple revolving joints so I have designed…
I wanted to install an Eufy pan&tilt camera on the ceiling where there were power cables installed previously for a lamp. I wanted to use an old 5V 2A USB power supply which was 30 mm tall and hence it did not fit so I made this extender…
I wanted a sturdy under-the-shelf mount for my KitchenAid tools so I have designed this piece. I thought it is not the best idea to make the locking pin from plastic so I have used Stefan's amazing short M4 threaded insert and an M4x10…
This is a minimal case for the amazing Nitecore F1 charger/power bank device. It keeps the attached 18650 battery in place and the dovetail on the side of the case lets you to mount it right below the handlebar stem. To keep the charger…
Minimal, simple and sturdy DIN rail mount solution for MeanWell's LCM-25KN LED driver. Assembly: I have uploaded the Fusion 360 source file as well in case if you want to alter the dimensions.
Are you a boomer like me who does not like vertical videos? If you are then this mobile stand is for you. It holds your plus size phone securely in landscape orientation. The stand has a built in Arca Swiss plate, my favorite camera…
This is a binocular adapter designed to fit an iPhone Xs Max to a Celestron 71404-DS 8X42 TrailSeeker binocular using a Tech 21 iPhone case. The items I am using to make photos with this setup: Really Right Stuff's travel clamp with micro…
A minimalist mount which locks the Audioengine D1 DAC on the top of CalDigit TS3 Plus dock.
Lightweight solution to carry my favorite tracklogger on my belt. Designed to fit standard 35 mm belts, even the thickest tactical ones.
I have a nice tiny ultrasonic humidifier which has several issues: it is designed to accept PET bottles only it is almost impossible to clean the vapor head properly if turned on it will illuminate a disgusting strong blue light thru the…
A simple template for guiding an engraver toolhead. Designed to fit a 3 mm toolhead but the design is parametric hence you can alter and export your own version from it: https://a360.co/2zihnYl
This is a 3D printable plier holder. Designed to fit in the right pocket of Snickers Allround Work Stretch pants. Protects the pocket and holds the plier in place:
We had to install several MDT's amazing 4-pole binary input devices (BE-02001.02) on the beams of a sealed attic. We have used Wago's picoMAX 2091-1524 & 2091-1104 connector pairs for joining the binary input wires with the CAT-5E UTP…
An easy print without supports. Mount height is 40 mm so you will need longer screws to fix.
I hate when alarm system installers using zip ties to mount this tiny board when it has 4 proper M3 mounting holes. As an electrician we install DIN rails everywhere we go (seriously) hence this mount was created as DIN rail compatible.
In case your camera does not come with a wall mount solution but has a standard tripod mount nut in its case. The mount is 12 mm tall and the ¼"-20 UNC nuts in the mini ballheads are usually ~ 5 mm deep. You will need a 12 mm long ¼"-20…
This is a quick & dirty solution to mount your existing Qi charger behind a 130x180 mm picture frame. Twelve South has a nice looking Qi charger picture frame called PowerPic: https://www.twelvesouth.com/products/powerpic But what if you…
This is a tiny vaseline storage container which can be attached to a standard Elastoplast spool. Runners are using both Elastoplast as well as Vaseline to protect the their skin against rubbing on sensitive areas during run. By attaching…
If you have ever struggled to install wires in Wago picoMAX connectors you will understand the neccessity of this tool.
The mount is a snug fit in the bottom of the ceiling. Printed with a Prusa MK4S from ESUN ABS+, 0.2 mm layer height, 0.4 mm nozzle. No support or any special setting needed. Source Fusion360 file also uploaded - feel free to alter the…
I wanted to get every last bit out of my Garnier roll-on deodorant. To do that, you need to store the roll-on upside down when it’s almost empty.
A few days ago, we had to splice a 4-core signal cable above a suspended ceiling, with the added constraint that the splice had to fit through a 42 mm cutout for a recessed spotlight. We could have done it the lazy way and left the splice…
These are all currently available results.
