Counting matching models…
This ratcheting cable clamp / carabiner is extremely easy to print (no support, print in one piece) and works great with PLA, PETG or other materials. I am using it also on the beach to carry my flip flops around by ratcheting them to my…
10cm Coffee stencils with a rim to avoid spilling of cacao. Very nice motives by Stasiek! Note: If you like the shape, I have created more stencils over time with the same size and shape.
The original underdesk drawers from Godard Scientific are awesome. One thing however which I needed to change was that the drawes were a bit small - and I wanted to make use of my Prusa XL to get some bigger drawers. So this single drawer…
This is a collection of 5x1 gridfinity base sizes with 9 seperate spaces for M2/M3 screws, nuts, washers and locks. Each unit fits at least 40 pieces - but can go up to 150 (depending on categroy). The STL models are included to either do…
You need drawers under your desk and have a lot of stuff to put in there? Well, then this might be what you were looking for! This is a big drawer cabinet which can be glued or screwed underneath your desk (if there is enough space…
This is a collection of 5x1 gridfinity base sizes with 8 seperate spaces for M4/M5 screws, nuts, washers and locks. Each unit fits at least 20 pieces - but can go up to 150 (depending on categroy). The STL models are included to either do…
This is a coffee stencil with a Kitty. It fits coffee mugs up to 10cm (if printed at 100%) For my own collection I created a few of these following the same size and build for better storage.
This is a coffee stencil with a sea turtle. It fits coffee mugs up to 10cm (if printed at 100%) For my own collection I created a few of these following the same size and build for better storage.
This is a 10cm diameter coffee stencil with a hibiscus flower. It has (as all my other stencils) a security rim to avoid cacao spillage as well. Note: This is another stencil from my series of stencils which are all following the same…
If you are a cheese lover and you do have some pills/food supplements lying around - this will be for you! It does look like a piece of cheese and if printed correctly the seams become invisible. Printing: Put the top upside down - the…
You need drawers under your desk and have a lot of stuff to put in there? Well, then this might be what you were looking for! This is a big drawer cabinet which can be glued or screwed underneath your desk (if there is enough space…
A simple temp tower to be used with PETG and ObXidian nozzles. Range 230C-270C.
My wife wanted to have some stencils for her artwork in scrapbooks, junk journals, etc.. So - here are two different stencils I pulled together.
This adds a water tray / cleaning tray to a Jura J8 - or similar model which can be used for quick collection of all the cleaning water (without using the big tray underneath for easier cleaning).
This is a mixture of various Gridfinity models to host things in a space saving design: Long Screws (20-40, 30-50 for M3, M4, M5) Ball bearings Knurled heat insets (M3, M4, M5) Circuit board spacer screws (M2.5, M3, M4) T-Nuts The labels…
If you have a Fixdry drier which can dry 2 filament spools at the same time, you know potentially the problem: You have to lift the lid and fiddle around with it while you insert two spools of filament wile pulling the two filament…
One straggler: Run into a fabulous model which required M2.5 screws and had suddenly a full set of M2.5 screws lying around. The model will hold 4, 6, 8 ,10, 12, 14, 16, 18, 20 and Nuts in one 5 bin Gridfinity package to safe some space…
This tool holder can be hung into the extrusion either on the left or right side of the printer. There are two separate base versions for the side. Things you can get organized with the “base” version: The 6 XL Prusa Allan/Torque wrenches…
Do you have a TV set close by your 3D printer like I have? If so, you most likely wanted to have a good way to store your TV control and your Switch2Pro controller close to the printer? Well - if you happen to have either… a Samsung TV…
This is a magnetic adapter between these two filtration systems ( Ultimate 3D Filtration system , and Exhaust filter with fan enclosure ). It allows to add an active HEPA and active charcoal filter to the filter setup (when needed) by…
A redesign of the Prusa XL screen guard , but compatible with the EnXLosure (A very nice minimalistic enclosure) . It is slightly less wide, and fits together with a set of doorstops compatible with the enXLosure and adds a light…
This model allows you to use the Buddy3D camera with the Prusa XL. It even works with the EnXlosure (but that is tight). This is a multi-remix of multiple models: The 3DBuddy redux model The Heatbed accessory mount The new version 2 has…
This is a foldable dryer for bottles, glasses and other round vessels. Even the longest and heavy ones we have in our household are easily able to stand and dry stable on this without falling over. Due to being able to be foldable, it is…
Allows to created stacked Gridfinity boxes - OR - to lift all boxes a bit if some padding is needed.
There are 2 tree supports: A direct force plug on A tension/wedging plug on which will wedge and keep stable that way. Both can be screwed with a M5 / 8mm (or longer) screw to the rod you can buy at any gardening / home improvement center…
If you own a Peloton bike and you would like to use a virtual biking app like Zwift or MyWhoosh, then you might want to use a tablet with it. This holder is simple to print and has enough stability to prevent the tablet from falling. I…
I used an SCAD parametrized model to create my Gridfinity boxes, using the default parameters. It turned out that a height of 42mm without Z alignment (trhough e.g. Zack's method) does not lead to the correct height and as such I run into…
This bumper works with The Prusa XL + the EnXlosure - or without it. It … .. is much easier to install as the three old pieces are combined into one. .. encapsulates the display so that less dirt can fall into it from the printer ..…
This is a gridfinity element which allows you to test your batteries. In order to do so, you insert the battery, pull out the sensor, rotate it and push it down on the battery. In order to create this, you need: Print the three pieces.…
I was asked to create some more space saving gridfinity compatible screw organizers. The model will hold 30,35,40,45 and 50mm screws in one bin. The labels and the bases are kept separate so that they can be printed in multi color. Simply…
Ever had a cupboard , table or other piece of furniture which was wobbling? Here are 3 spacers for 2mm, 3mm and 4mm with a border around it to avoid that the furniture is slipping off. To be certain what is what, the thickness is printed…
Yes, I agree, this is absolutely nothing special (except for maybe that I was able to fit each EarBud case into a 1x1 bin. However - I first tried to download various bins from the model archive, printed them and they didn't fit. So ……
After using my first exhaust filter for half a year now I noticed that I had still to cough quite often when entering the room. Turns out that a HEPA filter is really something which should be used in addition to the activated Carbon. I…
I needed to stow away a Maerklin / Trix train DCC Train remote controller underneath a table. All this needs is a double sided adhesive tape with a width of 1.3mm or ½ Inch. This is more then enough to hold the box and the control in…
Very simple: Markers which can be added to multiple PTFE tubes to distinguish them. This is useful for an MMU unit, an XL or other multi color printer and / or a dryer. In my case it is marking the exits of the Sunlu S4 exits before they…
A light switch featuring a unicorn! This light switch allows to use 2 normal US switches PLUS a new “slot” where you can put a Hue V1 or V2 remote.. which extends over the wall. which covers an unused switch slot. You will need 2 times…
When you use my camera holder and these nice purge buckets, then there is no space to combine the two. This model is the right side of the purge bucket which still works with the camera!
Did you get centedes, cockroaches or other pests in your home and you do not know where they came from? If you have a shower drain as you can see here, they might have come through there, In that case there is an easy fix: Print this part…
This is a clampable shelf which is strong enough to hold .. a lot. There are two easy rotatable knobs to clamp the shelf where ever you need one and the size of the shelf is big enough to house e.g. a tripod with a very long (or short)…
This is a lid for the EnXlosure, which allows to a. add this exhaust filter/fan https://www.printables.com/model/779722-exhaust-filter-with-fan-enclosure-for-3d-printers b. is flexible to easily swap the exhaust with something else if…
The Milk container key coming with the device seems to be something usable in a restaurant, etc. - but for home you want to have something which can stay in there, looks nice and is easy to operate. This is the second version of the key,…
Note: Contrary to the picture, the text on the organizer is “Coffee Corner”. This was meant to be our “ultimate coffeemaker” organizer, which can be placed beside the coffee machine under some utensils, sweeteners. It works especially…
Allows to place a cup / mug / insulated metal mug with handle onto a T-Rail from a printer. So ideal for a Prusa XL! Due to the length of the T-Rail insert, this is very stable and easy to insert / remove without a cup. You can print this…
This is the second version of my tree support - or better - the version with two poles for better stability. As with the first version , you can use M5 / 8mm (or longer) screws to screw the rod/pole (which you can buy at any gardening /…
I have various old notebooks lying around which I want to keep. However - LiIon batteries get dangerous to keep after some years of non use (or even used). So if you do the math on how many batteries you might have in your home, you…
I have various old notebooks lying around which I want to keep. However - LiIon batteries get dangerous to keep after some years of non use (or even used). So if you do the math on how many batteries you might have in your home, you…
My wife asked me to create a simple tabletop papercard holder. Well - this is as simple as it gets. However - using a silky material, this thing really shines and looks much sleeker than the simplicity allows. She loved it. That's all I…
These are all currently available results.
![Prusa XL + Buddy3D [+ (optional) EnXlosure] = Finally a proper camera! V2.1](https://media.printables.com/media/prints/cc1ff817-1bc4-422b-8db8-b8621fb7fbab/images/9932174_79ba0de8-bcc7-42f4-9842-4478fb3b0da4_d38beba8-87ac-48ba-bcf0-e3dc7d675355/screenshot-2025-06-02-at-163442.png)
