Counting matching models…
Small filter connector for a reverse osmosis unit so you can attach small filter housings to one another. I'm sure you can probably buy these, but I have a printer and this took no time at all to design. Thumbs up if you print and find…
Jaguar Recurve Crossbow Triple Rail Mount adapter turns your single rail into three rails so you can pimp out your crossbow with useful accessories. Its got holes for screws and things, but it should be a tight enough fit that you can…
Replacement 1L Airpot Base designed in Fusion 360 with geometry and sizing similar to the original. Print Settings Printer: Prusa i3mk3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Prusa PETG PETG Black Notes: Printed in…
Motor guards for a Furibee Darkmax 220 quadcopter. The motor housings seem to be like mud magnets everytime I eat dirt with the quad so I designed these guards to cover them and take the worst of the mess. I haven't been out for a…
45° Wallmount for the Growmau5 Far Red Initiator Puck, probably best printed in PETG/ABS or similar higher temperature yielding plastic as the puck can get quite warm. I have retrofitted my pucks with extra passive heatsinks on the back…
Table or Monitor mount for a Kingston Memory Card Reader. You will need a couple of M2.5 screws to put the backplate on with and an M5 screw for the mounting clamp. The Clamp has an M5 hole in it and the Mount Screw Cap is threaded for…
Aomway Commander Goggles battery adapter case with both an optional goggle clip or belt clip. You will need M2 fixing hardware, M2 x 16mm if you are using either of the clips or M2 x 12mm if you just want the case. M2 nuts are required…
Mounting bracket for the Furibee Darkmax 220 to enable it to hold the Furibee 4K WiFi Action Sports Camera. Slacken your bolts off and drop the carbon fibre plate down to the next hole down on the chassis then insert the camera mount.…
These are all currently available results.
