Counting matching models…
I have included a 3mf file for the CC that contains all parts and how I printed them. I have also included the stl files if needed. You will still need to download the original files from the links below and just replace the rear pieces…
Tired of getting that roll of filament on and then realizing you left the cutters laying elsewhere? I did! I have my Ender 3 V3 KE inside an enclosure and it never failed, I would have a new roll on and my clippers would be lying 2 feet…
I wanted to mount my Nebula camera up out fo the way but still have a good full-size view of my build plate. Since I have my Ender 3 V3 KE inside the Creality Enclosure I designed something to work. This clamps to the 8mm rod used in the…
I took the original model and just made it beefier for a better more secure mount as the original fell off often. I recommend using PETG or at least PLA+. This design also allows use for the cheap Harbor Freight brash brushes pictured.…
I recently purchased several packages of varying grit 5" sandpaper pads for my Ryobi Orbital sander. I wanted some way of storing them in my tool box drawer. I also wanted a quick way of identifying which grit I was looking for. I sized…
Using a readily available parametric latching box I was able to design an insert to hold everything and store it. Use a piece of 1.75 TPU filament as a seal. I did put a few drops of superglue to hold it in place. Link to box files.…
Super easy print! No supports, no brims or raft needed.
Heavily modified version I found on a different STL site. I added labels and enclosed the bottom of each one so I could use some double sticky mount tape and affix them inside the cabinet door. Works great! Print Settings Printer brand:…
This is a simple replacement grip for the older Mathews Legacy compound bow. I designed this for a friend and it fit great. No need for glue or anything to hold it in place. I believe he said his bow was a 2004 model but wasn't totally…
It never failed, I would go to start a new roll of filament and forget to snip that end to 45 degrees. I had to do something to get those side cuts right next to where I was working as I am lazy! I installed some new light brackets and my…
I seem to always find myself trying to locate my clippers when swapping filaments. This simple holder clips on top of the gantry, clear of any moving parts and lets you hang your cutters right where you need them. Printed in PETG but PLA…
4/12/2024: REVISE #2 My initial design did not hold up for very long and a couple bumps with my hands when changing filament finally took it out for good. I decided I needed something beefier but wanted to stick with PLA as I already had…
Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. Check out my other coasters here!
Here is a set of Double V-Grip soft jaws I made. Great for holding round stock vertically or horizontally. I made a set for each vise I use daily. 2.5" Yost, 3" Yost, and a 4" Morgan Chicago 40. They are sturdy and hold up well at least…
This is a great design but needed different sizes. This model will fit the Grizzly G4003 12x36 and should fit the 14x40 gearhead lathe as well. There are 2 models available as the lathe comes with 2 chuck keys. One measures 16mm diameter…
152 mm x 96 mm x 5mm Face down, 2 color printing with recess to accept up to 6 of the 12 x 3 mm round magnets. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. Magnets should be a press fit but…
Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. Check out my other coasters here!
Printed on KE with no supports, 15% infill, 2 walls, PLA
Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. Check out my other coasters here!
This was just a fun little project for my nasty habit of Vuse vape. I had several bodies laying around and thought I could put them all together and charge at the same time. The holes for chargers are very snug. This keeps them in place…
These are drill collars (aka stops, bushings) to set up for specific repeatable hole depths. Includes all 1/64 increment sizes between 3/32 and 1⁄2. These are embossed with sizes. These are setup for a single pan head type sheet metal…
UPDATE: 4/10/24 to give more tolerance for magnets. Here is a set of smooth soft jaws I made. I made a set for each vise I use daily. 2.5" Yost, 3" Yost, and a 4" Morgan Chicago 40. They are sturdy and hold up well at least so far. As a…
Just a simple little hook that holds the bed scraper that comes on USB drive with the Ender 3 V3. I have the plus model but I believe it is the same with both models. Fits the profile of the scraper to keep it a little more secure. Just…
Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. Check out my other coasters here!
I just modified the Gas Cylinder Valve Indicator from Luma, here on printables to fit my 100 lb propane tank. This tank has the type of valve knob with 8 ears. Picture of the valve attached. If you have the other style with 6 ears. Check…
I recently ran into an issue installing my new WiFi Smart Garage Door Opener. There was no bracket to mount the sensor to the door and my door had a lip on it preventing me from lining it up easily. I made this bracket that the sensor…
I just modified the Gas Cylinder Valve Indicator from Luma, here on printables to fit my cutting torch oxygen tank. This tank has the type of valve knob with 8 ears. Picture of the valve attached. Check my other models for Acetylene cap.
A 214mm round bar sign featuring Eagle Rare Kentucky Straight Bourbon Whiskey. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer.…
I just modified the Gas Cylinder Valve Indicator from Luma, here on printables to fit my 100 lb propane tank. This tank has the type of valve knob with 6 ears. Picture of the valve attached. If you have the other style with 8 ears. Check…
Designed to replace the original cap. Fits great on the model of birdhouse bird feeder pictured.
A 232 x 144 x 6 mm bar sign featuring Ice Cold Beer Served Here arrow. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. Holes…
A 101.6 mm (4") round coaster featuring Knob Creek Straight Bourbon Whiskey. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. Check out my other coasters here!
UPDATE: 4/10/24 to give more tolerance for magnets. Here is a set of knurl textured soft jaws I made. I made a set for each vise I use daily. 2.5" Yost, 3" Yost, and a 4" Morgan Chicago 40. They are sturdy and hold up well at least so…
Great fun little gift for the kids or grandkids. 200 mm by 102 mm (8" x 4") bank for childs room. You could easily add lights to the inside if you wanted. 3 separate files allow you to choose the colors you want. Then assemble and glue…
Great fun little gift for the kids or grandkids. 200 mm by 102 mm (8" x 4") bank for childs room. You could easily add lights to the inside if you wanted. 3 separate files allow you to choose the colors you want. Then assemble and glue…
I have seen a few of these floating around but after trying several, I decided I would just make one that worked best for me. 1 magnet was not enough to hold the flashlight on a vertical smooth surface. This clip not only clips on easier…
A 234 x 145 mm bar light featuring Ice Cold Beer Served Here arrow. I made this for my home bar and figured I might as well share it. Load all front STL's at same time as an assembly, colors can be assigned under “Objects” in slicer.…
Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. Check out my other coasters here!
A 214mm round bar sign featuring Buffalo Trace Distillery Bourbon Whiskey. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer.…
A 240mm x 150mm bar sign featuring Old Forester Straight Bourbon Whisky. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. There…
I printed with .20 line height, 3 walls and 35% infill to give it a bit of heft. No supports!
Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. Check out my other coasters here!
A 250mm x 148mm bar sign featuring Blanton's Single Barrel Bourbon. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. There is a…
Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. Check out my other coasters here!
UPDATE: 4/10/24 to give more tolerance for magnets. Here is a set of smooth soft jaws I made. I made a set for each vise I use daily. 2.5" Yost, 3" Yost, and a 4" Morgan Chicago 40. They are sturdy and hold up well at least so far. As a…
A 243mm x 146mm bar sign featuring Bulleit Bourbon Frontier Whiskey. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. There is…
I made some small wheels to fit my small wheel attachment. This is just a holder that can mount to the wall and hold a set of them.
This is a convenient little bowl/base that attaches to the bottom of your cheese grater. I made it to fit the cheap one we have most likely from the big department store that begins with a W. Anyway, the bottom measures 81 mm x 105.5 mm…
This is a remix of a great idea from The_Architect_23, I have the larger Grizzly G4003 lathe and my backsplash had a thicker top. I resized the original holder to fit over the backsplash as well as extended it a little. Resizing also made…
This is an actual replacement clamp for the Reeder Products 2" x 72" grinder attachment. I have included the STL for clamp which requires two 4mm threaded heat-set inserts and one 5mm threaded heat-set insert. The benefit of this setup is…
Replacement Craftsman Evolv Table Saw Stand leg end cap protector. These fit the Evolv model and may fit other models but print one first to check fitment. I somehow lost one of the originals so designed these and replaced all 4. Designed…
Request on FB for a file of this one. Just a simple 7mm wall grommet for up to 7mm cable.
A 220 mm round bar sign featuring Angel's Envy Bourbon Whiskey. I made this for my home bar and figured I might as well share it. Load both STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. There is a…
A 150mm x 240mm bar sign featuring Elmer T Lee Straight Bourbon Whiskey. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. There…
A 230mm x 138mm bar sign featuring Whistlepig Straight Rye Whiskey. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. There is a…
A 225mm round bar sign featuring Woodford Reserve Kentucky Straight Bourbon Whiskey. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in…
A 230mm x 155mm bar sign featuring Colonel EH Taylor Bourbon Whiskey. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. There is…
Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. Check out my other coasters here!
Designed to hold 6 of the 4" Coasters Click here to see the ever growing collection of whiskey and bourbon coasters!
I finally got tired of the hose from the pull-out kitchen faucet always catching on the shut-off valve under the sink. If you have one of these pull-down style faucets, you are probably aware of what I am talking about. This guard is…
A 214mm round bar sign featuring Makers Mark Whisky. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. There is a keyhole slot…
A 225mm round bar sign featuring George T Stagg Bourbon. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. There is a keyhole…
A 185 mm x 220 mm bar sign featuring Michter's American Whiskey. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. There is a…
A 222mm round bar sign featuring WL Weller Bourbon. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. There is a keyhole slot in…
A 214mm round bar sign featuring Knob Creek Straight Bourbon Whiskey. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. There is…
Do you hate waiting for your epoxy when trying to get something glued up? As a knifemaker, I do! I have seen these for 4 oz and 16 oz but nothing for an 8 oz bottle that I generally use. All 3 pieces are printed flat on the bed and it…
A 220mm x 80mm bar sign featuring Heaven Hill Distillery. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. There is a keyhole…
A 214mm round bar sign featuring Wild Turkey Bourbon Whiskey. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. There is a…
A 214mm round bar sign featuring Penelope Bourbon Whiskey. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. There is a keyhole…
A 215 x 195 x 5 mm bar sign featuring 1792 Bourbon Single Barrel Whiskey. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer.…
A 214mm round bar sign featuring Elijah Craig Small Batch Kentucky Straight Bourbon Whiskey. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under…
These are all currently available results.
