Counting matching models…
The original one created by by TomekB is a good work, it has the correct shape but it has not the same feeling of the original tank mouse due to the inverted mechanism and the fact that the button had the tendency to “collapse” toward the…
I was dissatisfied with the previous gun i published because is bulky and unrealistic, also rather uncomfortable. so i designed another on e using Notthingham82's Glock as starting model. i suggest to print the front part laying on the…
The XS10000 can keep the PICO4 charged without stressing the battery and has a switch to stop the charging, i tried different power banks but this one seem to allow 4 hours of play. My suggestion is to activate it when the internal…
Print as is ( i use .28 resolution and 3 walls with 35% lines infill) and mirror for left holder, use a little bit of masking tape or electrical tape inside the receptacle. Be sure that you are using the correct handle for each controller…
I tried to use one of the available "bread bin" clip i found on the internet but the one i found needed either invasive modification or they were difficult to align so i came up with a quick and dirty solution that also allowed me to…
I played several fps using UEVR, they were cool but someting was always missing especially when using a rifle and not a pistol. A simple Stock would not do as there are not enough buttons on the pico controllers. So i decided decide to…
I played several fps using UEVR, they were cool but something was always missing especially when using a rifle and not a pistol especially in “ALIENS Fire Team Elite”. After some time the mod i created did not just feel enough nor it give…
I just bought an old Atari 520st(fm) on eBay it was working but one of the capacitors on the 220v side was badly bulged. Since i had a mean well PSU i bought to use as spare for my amiga 1200 and i already built one to use for my A500, i…
This dome is used for housing this model of ERM motors. Cyanoacrilate glue is used to attach the vibration motor to the dome. Suggested 3 permeters at least with > 30 % triangles infill.
I needed a channel slector to mute my bass and send the signal to the tuner since i had the part laying around i used 3 female jacks and a true bypass selector. If you want the button with imperial logo i will post it as a separate item…
this is a replacement led diffuser for the amiga 500 for broken LEDs or for customization. the diffuser is higher than the original one in order to allow the 3mm replacement led to be mounted flush on the keyboard pcb (thus avoiding…
I recently got bitten again by the retro-gaming bug. I still have a box of joysticks in my basement, and my favorite one is the Quick shot 2 turbo, i had 2 one perfectly working and one without c able and selector, i had bunch of donors…
As i stated i needed a new centering grommet so i designed one, since i had only standard TPU i reduced a little the overall volume and kept radii and height , print with 2 walls and 2 solid top bottom layer. 15% gyroid infill. i compared…
As i stated i needed a new centering grommet so i designed one, since i had only standard TPU i reduced a little the overall volume and kept radii and height , print with 2 walls and 2 solid top bottom layer. 8% gyroid infill if you need…
These are all currently available results.
