P
Printablesjowlo
Garmin varia mount race number holder
The size and offset of the base plate is modeled to nicely fit this Garmin Varia mount for the Specialized SL8 . Needs a M3*8 countersunk screw and nut
- Downloads
- 374
- Likes
- 12
- Rating
- 5
All models
Counting matching models…
P
Printablesjowlo
Rugged Box for DJI Flip drone
This box is based on the awesome parametric Box by bulbasaur0 and fits a DJI flip snugly. In the lower part, there is some space to add padding foam, but the case is tight enough that nothing rattles even without using any padding. The…
- Downloads
- 371
- Likes
- 27
- Rating
- 5
P
Printablesjowlo
Garmin Varia mount for Rose Backroad
Seatpost mount for the Garmin Varia (and other) radars to mount to a Rose Backroad (and probably other Rose bikes). You will need these additional parts : 2 M3 6 or 8mm screws 2 M3 thread inserts
- Downloads
- 308
- Likes
- 14
- Rating
- 5
P
Printablesjowlo
snot — bike gear wall storage
This model is inspired by a commercial product that is also 3D printed but very expensive. This design uses a 25mm wooden rod. You need two wall mounts that screw into the rod. Print the drill guide twice and slide onto the rod. Drill one…
- Downloads
- 132
- Likes
- 49
- Rating
- 4
P
Printablesjowlo
Xiaomi Wiha Precision Screwdriver Gridfinity 1x4
I wanted a smaller gridfinity bin to store the Xiaomi & Wiha precision screwdriver set. This one only uses 1x4 regular gridfinity slots with a 3u height. The slot for the driver should be able to hold the driver with a bit in it. The…
- Downloads
- 104
- Likes
- 17
- Rating
- 4.5
P
Printablesjowlo
snot — bike wall mount
This model is inspired by a commercial product that is also 3D printed but very expensive. This design uses a 25mm wooden rod. The main mount is made up of two pieces that need to be joined together with two dowels and a standard M3x14…
- Downloads
- 90
- Likes
- 35
- Rating
- 0
P
Printablesjowlo
Wahoo Elemnt Bolt V2 rugged box for travel
I never knew where to store my Wahoo ELEMNT Bolt V2 during travel. This box now keeps it safe. I was in a hurry, so this was a quick and dirty design. I used the box from @asymptoticwalnut for the geometry and just sized the rugged box…
- Downloads
- 89
- Likes
- 18
- Rating
- 0
P
Printablesjowlo
Nitecore NU25 UL Bike Helmet Mount
This is a bike helmet mount to fit the Nitecore NU25. I adapted the rather bulky design and changed the angle so that it works in a more aggressive position on the bike. It should fit for the UL and non-UL variant. I glued a small piece…
- Downloads
- 84
- Likes
- 5
- Rating
- 0
P
Printablesjowlo
Fitbit Air Holder for 25mm Polar OH1 / Verity Sense Armband
Mounts the Fitbit Air sideways onto any 26mm bicep-style band, such as the Polar OH1 or Verity Sense optical sensor strap — keeping the tracker secure and flush during sports. Best printed in TPU for flexibility and a snug, skin-friendly…
- Downloads
- 62
- Likes
- 6
- Rating
- 0
P
Printablesjowlo
Katadyn BeFree Filter to Hydrapak Hose
This hose adapter for the Katadyn BeFree water filter lets you directly filter your water back into your bladder. No more taking out the bladder from your backpack. Best printed with support and with the hose side opening on the build…
- Downloads
- 50
- Likes
- 4
- Rating
- 0
P
Printablesjowlo
Garmin HideMyBell Adapter
This is an adapter to attach a bare HideMyBell bell to the bottom of a standard garmin mount that features a male garmin connector. You can twist the garmin mount in one direction only. The bell also only twists on in one direction so…
- Downloads
- 32
- Likes
- 5
- Rating
- 0
P
Printablesjowlo
Headset top cap adapter for Dengfu R12 and Tavelo Avro Gen1
This is a top cap for the stock headset of a Dengfu R12 frame and the adapts the angle, size and shape for the Tavelo AVRO Gen 1 handlebar. The small pins are printed seperately laying on the side and should be pressed into the small…
- Downloads
- 31
- Likes
- 1
- Rating
- 0
P
Printablesjowlo
Top Tube Bag Stabilizer
I remixed (as in rebuild and modified) the design by @SP_UAS from Thingiverse as the top tube on Brother Mehteh frame has a 29mm diameter. My Apidura top tube bag is now completely stable no matter the terrain. The design is parameterized…
- Downloads
- 20
- Likes
- 5
- Rating
- 0
P
Printablesjowlo
Cycling Radar Strap & Saddle Bag Mount
Lets you attach a cycling radar (or anything with a garmin mount) to a saddle bag or any other strap if you like. Additional Hardware: Garmin mount itself ( AliExpress or print one if you like) 4x M3 nuts 2x M3 12mm screws (button or…
- Downloads
- 17
- Likes
- 0
- Rating
- 0
P
Printablesjowlo
Wall Mounted 608z Pulley
This is a pulley wheel for rope up to 8mm in diameter. It can be mounted with countersunk screws “standing up” or lying on it's side. The pulley uses a 608z bearing. The screw should be printable when lying on the side, use your slicer to…
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
Printablesjowlo
Magnetic bit screwdriver with print-in-place freewheel
Changed the magnet from the original model to use 2 6x2mm and added a small lip that keeps the freewheel knob at the end in place during print. Needs to be cut with a knife after printing. Print with the bit side down on the print bed. I…
- Downloads
- 12
- Likes
- 3
- Rating
- 0
P
Printablesjowlo
Gliders for loop curtains on wire
When using curtain wires (ie IKEA Dignitet) with curtains with loops, these get easily stuck and don't glide very well on the wire. These gliders slip onto the wire and into the loops. They have a little hook to stay on the wire and the…
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
Printablesjowlo
FlexTail Zero Nozzle for Rab Ultraphere sleeping pad
This is a nozzle to use your FlexTail Zero pump on Rab mats like the Ultrasphere 5. The Model replicates the inner construction of the original adapters supplied for other mats, prevents you from stuffing the adapter too far onto the…
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
Printablesjowlo
Mondince FM376 x Kreuza Apex GR
Headset top cap transition spacer that fits on top of the seal ring and to the Kreuza Apex GR cockpit - 10mm height. While not ideal, i am using PETG printed headset top spacers for a while without problems. Make sure to set many wall…
- Downloads
- 1
- Likes
- 0
- Rating
- 0
These are all currently available results.