Counting matching models…
Just in time for the Christmas season, version 3 of the popular Christmas tree is now available. The "branches" of this Christmas tree are made of snowflakes. There are 15 layers of snowflakes of different sizes that are joined together.…
The base has two holes that allow it to be attached to a worktop. I attached them to a small leftover piece of wood panel. The holes in the base mounting brackets are intended for 5mm melting nuts. As screws I used existing screws from a…
I was looking for an inexpensive way to enclose my 3D printer (Elegoo Neptune 4 Pro). I designed several parts to connect 19mm wooden rods. This allows for the rapid construction of enclosures for various purposes. Besides printer…
Simple decorative trees in three different sizes (130, 110 and 90mm +10mm base ring) for lighting with LED tea lights, not just for Christmas. Arrangements with two or three trees of different heights, as shown in the photo, look…
I recently bought a Sunlu S2 filament dryer. The device has two holes on the top for feeding the filament through so that you can print directly from the dryer. Unfortunately, the filament is fed out perpendicular to the winding…
I designed this replica of the famous Wacken skull years ago. Since Wacken is again just around the corner, I'm uploading it here now. The size is designed for a 22 x 22 cm print plate (model needs to be rotated a bit), but can of course…
I designed and printed this treasure chest for a 60th birthday and personalized it with the recipient's initials and year of birth. The STL files uploaded here are without text, but individual text can be added in the slicer (with Orca or…
This lids for various round plastic cups (yogurt, skyr, creme fraiche etc.) include cup sizes 75mm (200g), 94.5mm (500g) and 95.2mm (300g Aldi Körniger Frischkäse) and are designed for printing with TPU. The dimensions are defined so that…
Wet Senseo coffee pads can cause too much moisture in paper organic waste bags. The coffee pad dryer consists of a container that is permeable to the bottom and a coaster to collect the dripped moisture. --------------------------------…
This is the big brother of the star of my "Snowflake Christmas Tree", suitable for the real Christmas tree. The star with holding tube is 20 cm high, weighs about 50g (additional 12g for support) and took 2 1/4 hours on my "Neptune 4…
Based on my stand for Dremel 3000, I designed this one for Proxxon 60E upon request from Jara_454860. The base has two holes that allow it to be attached to a worktop. Or you can attach it to a piece of wood board to make the device more…
There are a number of cartridge lids available here and I have tried several. But something was always wrong, either the threaded hole wasn't deep enough, there was too much play in the thread or the sealing ring used was nowhere to be…
I charge my USB devices at two locations in my house, each on top of a small cabinet. I need two cables, one for USB-C and one for Micro-USB. However, the cables kept slipping behind the cabinets or lying around in a messy manner.…
The design is based on a similar adapter that was published on Thingiverse several years ago.: https://www.thingiverse.com/thing:4664184 My brother printed it, but had both mechanical and electrical problems. The adapter couldn't be slid…
I developed a new base for den Sunlu S2 filament dryer. The reasons were that I wanted to fix the device (in my case to a windowsill) and that I wanted to have ventilation at the bottom of the fan so that the moist air can get out of the…
A small gift for travelers: A mini "Ludo"-like game in an 80x70x30 mm box for printing on single-color printers. The game board is about 13 x 13 cm. The game board is divided into four sections held together by dovetail joints. A small…
There are already a few of these signs here, but I haven't found one in German. So I created this sign in both German and English. The sign is designed for two-color printing. After the tenth layer (with a layer height of 0.2 mm), the…
Widened version of Libery4Ever's great model. / Verbreiterte Version von Liberty4Evers tollem Modell.
I designed this stand for the Bonsenkitchen milk frother as a gift for a friend. The stand might also fit similar devices. For reference, the Bonsenkitchen milk frother's housing has an oval profile measuring 35 x 27.5 mm, tapering over…
I often have filament samples or leftover coils without a spool. When I hang such filament coils over the normal filament roll holder, they often slip off during the print and get tangled. I have developed a filament coil holder for…
I added magnets to the version of @Martom_2638517 so that the bits can be swapped and still don't fall out. As changing the files seemed too complicated, I completely redesigned the model in FreeCAD. Because of the magnets, the lengths of…
Clamp approximately 5 x 12 cm sections of microfiber cloth or similar material between the top and bottom parts of the tool, soak them with isopropyl alcohol (or glass cleaner for screens), and use them to clean your PEI plate, laptop, or…
Shaun the Sheep (who doesn't know him) leads a lonely existence in my guest bathroom. I thought he should at least be a part of the Christmas season and gave him a Christmas hat. There is a 0.4mm wide bar as support in the opening, which…
I know there are already a number of sanding blocks here, but this one is relatively small (105 x 56mm). The sandpaper sheet that I know of measures 28 x 23 cm. I designed the sanding block so that 5.6 cm wide strips are used, so you get…
In order to connect my Sunlu S2 filament dryer to my Elegoo Neptune 4 pro printer via a bowden tube, I have developed a simple holder for a bowden coupling. The holder is attached to the right side of the filament roll holder. This can be…
You can add your personal (short) text to this ring in your slicer. I created two versions, one with a straight text plate and one with a curved text plate. I personally find the curved one nicer, but I found the option to add text to a…
A friend asked me to design and print an enclosure for a Bluetooth audio decoder module. The enclosure is for the VRM-314-V2.0, the version with switches (see photo). The enclosure has openings for the jack and USB connectors and allows…
For years I had wrapped the ends of the pipes of my garden table with tape as a replacement for the crumbled plastic feet. Now I have finally designed a new foot and printed it from TPU. The foot fits pipes with an outer diameter of…
The Nivea deodorant sticks with the round lid are difficult to empty completely if the sticks are placed the right way up. With this holder, the stick is constantly placed upside down so that the ball in the stick is constantly moistened.…
The Mova VIAX series robotic lawnmowers navigate purely visually (without a boundary wire or GPS). However, the stereo camera is quite sensitive to direct or side sunlight, which can disrupt navigation. Unfortunately, the manufacturer…
A friend of mine had the end caps on the profile rails of his bike rack on his motorhome broken. He had already created a profile drawing, so it was relatively easy to redraw the cap in FreeCAD. Unfortunately, he didn't know the…
During my holidays in Danish holiday homes, I often noticed that the small bedrooms lacked tables or places to charge mobile phones. However, a power outlet was always available. I therefore designed this holder to charge smartphones…
I reverse engineered and printed this part for a friend. But since he was finally able to get a part from Prophete, it was not yet equipped with the magnets and tested. Therefore I can't guarantee that it will work that way. Maybe it can…
Since operating the remote control for my garage door hanging on my car key chain was always a bit fiddly, I wanted to install a remote control permanently in my VW T-Roc (2018). But the existing housing of the Hörmann remote control (see…
Commercially available bottle stoppers are often too tall to allow the bottle to be stored in the refrigerator door with the stopper attached. Therefore, I designed a stopper that is flat on top, thus taking up less height. The stopper…
I needed a magnetic wristband and found the great model from @KevinChagneau_651382. Unfortunately I had none of the two magnet types but lots of rounc 6x3mm magnets. So I used FreeCAD to modify his model to accomodate six of those small…
There are already similar boxes on this platform, but I wanted a fully parametric one that can be easily adjusted in height and diameter in the CAD program. I just enter diameter and height into the CAD programs spreadsheet (FreeCAD) and…
Since the existing case of my Tolino 1 e-book reader didn't fit my new Tolino 5, I designed and printed one. I was also bothered by the significantly narrower side edges of the Tolino 5, which made it difficult to hold the reader with one…
This holder is for "Oral-B Pro series 1" device and brushes and possibly may suit other Oral-B devices. This Oral-B holder has space for one device and 4 matching brushes. My personal version (shown on the bathroom picture) has space for…
The charging provided with the Honor Band is not very long and the magnetic contacts don't hold very tightly. This gave me the idea to design a charging holder that hangs on the charger and at the same time prevents the charging port from…
I purchased additional label tape cartridges in various colors for my Brother P-touch label printer. To store them safely and dust-free, I constructed a box for three cartridges. Ich habe zusätzliche Schriftband-Kassetten in verschiedenen…
I designed this plug-in charging holder for a neighbor's hearing aids because she didn't have a place to put the charger near the available outlets. If you're unsure whether the holder will fit your charger, please see the attached sketch…
I was looking for a small screwdriver for 4 mm micro bits as a gift. I liked the idea of the separate magazine for up to 7 bits from MT@kelsier_767299. However, with all the bit screwdrivers I found, I was bothered by the fact that the…
I had accumulated quite a few oil bottles that I couldn't find a suitable place for. So I quickly constructed a small shelf for the bottles that fits up to five 250ml bottles measuring 48 x 48 mm. When placed diagonally across the print…
I hate containers for viscous substances that you can't turn completely upside down to empty them, as you never get everything out. One example is the plastic bottles for Danish rémoulade. I often use the 900g bottles from P&W, which have…
These are all currently available results.
