Counting matching models…
Simple elegant hook for your curtain :) The Ikea one was just straight ugly... There is a lefty and a righty one in the file. It prints flat without supports. I printed it in Carbon fiber PLA from Protopasta. They have been up for a year…
Had my first clog on my Bambu X1 and realized it was not an easy task to clear it as is :) Jump into cad 10 min later my Prusa Mk3s saved the day! How to use it: Undo the hot end when cold, you don't want the fan running as it can touch…
The original Bambu Lab spool holder is such a pretty piece of metal I couldn't bear to put it away in a drawer forever since it goes to the worst possible place on the machine… So, I gave it some feet :) You will need 2 M3x10 or 12.…
Simple spool holder, nothing more to say about it :) I forgot, I integrated two screw holes on the feet so you can easily wall mount it. Now remixed with ball bearings: https://www.thingiverse.com/thing:2822341 Print Settings Printer…
Great original design, big thanks to Somnium for also posting a Step file :) To make it print easier and cleaner I removed most of the filet and replaced them with chamfers, especially the big inside one, also added Prusa style bridging…
I always wanted to share the original film processor that I created years ago... Its design was clunky and difficult to build, I finally found the time to simplify it making it easy to print and easy to build. Here are the files :) I also…
Simple quick stand for coins and watches. Can be scaled down to 50% for smaller things. When putting it together, start with the two large sides and then lock it up with the small front part. Be aware of the angles marked with an arrow in…
The Wainlux K10 is a nice and easy little machine but the laser footprint is small and it's quite difficult to position thing properly. It's even harder to do so when you do a series of the same thing. The laser zone is also very close to…
I couldn't find a bed plate holder that could be screwed down to a shelve or to the wall, so I designed one. It takes 4x #6 screws (4mm diameter ish) at least ¾ long, longer is best if mounted to the wall. The length fits between the ears…
Simple threaded filament guide, fit a 50mm or 2" hole. The threaded nut will hold it in place on shelves 9mm to 18mm. (0.35" to 0.7") Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2 Infill: 10%…
Designed it for my Daughter's valentine day at school. Quick and easy to print a bunch at once..
Just a simple bracket to fit a shelf on the old timey radiators :) Fusion file is included and it's parametric, just change the main inside diameter and gap between elements to make it fit your own radiator... Obviously it needs to be…
Pretty straight forward, I printed it with 3 walls for some strengths. It uses 4 flat head #4 x ¼ " screws. You can also just buy it here.
I just cut two 45 degrees chamfer at the top and bottom of the original model so it can be printed easily face down with no support. This lcd is a great easy mod for your Cr10s pro so you can access all the missing settings. I included a…
Just a simple spool holder for the large 5 and 15lbs spools. Print two of the sides, uses height flat head #6x0.5" wood screws to assemble. will accept metal bar up to 14mm diameter. I'm using a half inch tube. You will need a printer…
Just a simple Keychain, I designed it for our block party so I made it with the different streets around our block but you can use it for whatever word. Fusion file is posted, just edit the text sketch to what you need and adjust the text…
I made 2 of those for my first Underwater shoot. I needed my Eintein strobes to be just at the level of the water so I made those. The long leg is to help balance the heavier front of the Flash. And the top stud is sized to take the…
Sk-go extruder using the Dragon hotend and Orbiter extruder. It's designed to fit snugly on the Sk-go X beam, to be as small as possible and have a center of gravity almost centered on the beam. Unfortunately I couldn't positionned the…
I designed this bike for my Daughter's 2 years old Birthday :) She loves it and she witnessed the whole making of it! I design it in a way that you don't need any fancy tools to make and assemble it. You will need some drills and a drill…
My boy literally hates water on his face so I created this pot so I can sit it on his forehead and direct the water to his hair and to the back easily… Very easy to print, no support needed. Very easy to grab handle. It's just a bit on…
Exactly what I was looking for so I don't spend too much time on this :) Thanks Lemaru for the great fit with the wyze cam foot. Took the original stl in Fusion and added the 90degree bracket with screw holes to it. I posted the STL, F3d…
Third part of my Crusa mod to go with the MK3s extruder on the Cr10s Pro. Find my Mk3s adapter here: https://www.thingiverse.com/thing:4151703 I rearranged the breakout board for easier access, with a hinged door for protection. In the…
A simple bracket to fix your soldering station under your bench to be out of the way but easy to access. Uses zip ties to secure the station onto it. Holes are made for #4 wood screws Print Settings Printer: Sk-Go Rafts: No Supports: No…
Scaled down the original to fit 80mm fans, the hinge stays the same, added a bracket to screw on 2020 extrusions and a head that turns. M3 screws and bolts used everywhere. Everything prints flat and easy :) Also shared the Fusion360 file…
Remix with curved bottom and added pull out handles.
For my son's 5th birthday, I made a multiple piece's cutter to make a hotwheels fondant logo to go on top of his “cake”. there are two cutters for the two-layer base marked for the white bottom and red background. The letter cutter has a…
This is my remix of a remix ;) This simple spool holder was extended to be longer and more stable for large 5lbs spools, I also added two holes that will take 3/16" / 4.8mm metal bars to add even more stability. It can be drilled to a…
40mm fan duct that fits inside the new style sk-go part cooling fan. It clips on the V6 like the original one. I designed both, for the regular BMG orientation and for the mirrored one (that I'm using on the picture) Print Settings…
Easy to print, just slide the cable inside and then insert it in the rubber washer. Zip tie it and it's ready to go. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament:…
This is a Tab and back stop addition to the bed to make it easier removing and positioning the wham Bam magnetic bed. It must be printed out of high temperature material like ABS or PETG to survive the heated bed. You will need 6x16mm M3…
A simple cooking rest to keep your counters clean! Best printed in a dishwasher safe plastic like ABS or PETG
This is my adapter plate to use an Prusa Mk3s on my Cr10s Pro. I chose to adapt this extruder because I know there is a lot of great options around to upgrade it to almost anything you want including future evolution of its design…
Added an angle to the front bins for clearance and a big curve inside for easy access.
Pretty self explanatory, just a bracket to hold 1/2"pipe or tube. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 30% Category: Parts
This is a 7.4 to 8.4 gage to set your inductive sensor heights when upgrading your CR10s Pro if you have a steel or flex plate bed. This gage have multiple steps with 0.1mm increments so it's obviously best to print it at 0.1 or less. I…
This is the new style Sk-go fan duct for the volcano, modified to print without support and I also added a Pinda mount. Pinda position is 18, 12 (-18 for the mirrored one) Find my 40mm hotend fan duct to go with it here…
After install, slightly unscrew the brackets and use the front screw to tighten the belt. Have the gantry fully to the back and measure the gap with the frame on each side. Tension until both gaps are equal. I pre positioned the…
"update" the V2 file has a taper to make it sturdier, I also added the CAD files. I designed this 57mm adapter to fit my Prusa I3 Holder, It works well, snaps into the spool securely and turn very smoothly while printing. The inside…
Wanted something fun that moves on my porch for Halloween and the Wyze Cam Pan v3 is a perfect easy base to use :) It just needed a costume to look spooky and it follows people well adding to its spookiness. I will have it on a photo…
Here is a simple flag I designed for work to signal availability. There is 3 plates in the Bambu 3mf, one for all the parts together and two with the base and flag separate. Only one in the Prusa 3mf
A great companion for my Crayon box: https://www.thingiverse.com/thing:2249013 My kid loves it :) Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 20% Category: Toys & Games
I designed this so we could use a regular photography light stand to hold a 15" monitor. The screw spacing is the regular 100mm like on many computer display and the hole is sized to the regular light stand studd. Use a 4mm screw and…
Original model was close to fit my cable chain but needed a few tweaks.
Pretty straight forward thing, you need one M3 nut and bolt to mount it. Probe position is #define NOZZLE_TO_PROBE_OFFSET { 20, 10, -0.9 } To setup your probe, move the nozzle until it touches the bed, put a ziptie between the probe and…
Pretty much self explanatory, mounts to add cable chain on your Sk-go core XY printer. Use the M4s and nut that came with the printer to fix the back to it. The cable chain itself and the extruder mount uses M3s. Find the cable chain…
Easy to print, use the Sunkit provided glass to frame the best shot out of the kit. Hanging notches in the back and uses #4 x1/4 screws in the corners. Fusion file is provided.
This is just a silly Seckit branded corner piece to pretty it up ;) Category: 3D Printer Parts
I used strong double-sided tape. Just prevents my herbs jars from falling off the edge :) I printed it in carbon fiber ABS to look good and be durable.
This is an add-on for the K10 positioning tray. You will need two M4x35mm bolts and nut: 18-8 Stainless Steel Hex Head Screw, M4 x 0.7 mm Thread Size, Fully Threaded, 35 mm Long | McMaster-Carr Fusion and step files are provided.
3 point ball and rail Kinematic leveling system for Sk-Go. There is an angle in the front so thread the spring screw into the corner plastic pieces from the back first to form threads and then put them in the front. It is best to glue…
A1 mini spool holder wall mount, I designed it to be compatible with the inside holes of Ikea's cabinets because my daughter's mini is in one ;) I printed mine in PET-CF. Simply use the original mini screws and plate, I personally tapped…
While at Home Depot, my daughter noticed the two sided white and chalk boards. The thing was $9 and looked to be a nice simple project to design together :) it uses #6 x1" flat head screws going into the screw in plaster anchors. The…
I wanted my bed to stop shacking during fast small moves so I explored a few ways and this is the best and simplest I've found :) It slides over the rail carriage screws so you don't need to undo them, you will have to undo the lead screw…
These are all currently available results.
