Counting matching models…
Put this on your pegboard where you will need it. It presents the marker so that you can easily grab it. Pull the marker straight out if you want the cap with it. If your peg board vibrates, you can store the marker twisted to keep it…
This clip is meant to keep spare 12g cartridges handy, on a belt, wrist, or any velcro shoulder or vest patch. Cartridges rock out at the top. If you merge objects for three or more, it is easiest to use the out-board cartridges first,…
I wanted an angled scraper that holds the blade flat with the handle at an angle. Intended to use my surplus razor blades on my glass bed printer. The blade flexes so that the edge is flat on the glass and can wiggle under the edges of a…
So, you replace your crushed snap buckle, but you had to cut the folded end open to get the new buckle on the strap. Since you have a strap full of plastic buckles, you might as well have a plastic end piece to keep the strap from running…
Printed in TPU, this is a decent replacement for the silicone nosepiece on 3M safety glasses. Not my favorite safety glasses, but this makes them a little less fiddly. The top (face side) is curved, print flat side down.
This drops into a socket and holds a hook for screwing in or out. Originally designed for a 12mm socket, the 15mm version is just a 125% scale-up. Other sizes for different hooks can be scaled (metric or not), or just add some tape. It is…
Based on 1911 panels, but no cutouts or relief for slide release, mag release, etc. Fatter than your average grip panel. Added a wrap version with finger grooves. Modded wrap file was "sanded" in Blender. Category: Sport & Outdoors
This is a copy of the remnants of the strain relief from the cord of my father's Porter Cable drill. Printed in soft-ish TPU, it works well.
Requires 1/8" pins, sear spring, and some sort of small return spring for the slide bar (trigger). Print Settings Printer Brand: Prusa Printer: Prusa Clone Supports: Yes Resolution: 0.2 Infill: 100% Filament: any pla Notes: This is a…
I'm still working on how I grind and transfer coffee and didn't want to replace the stock prongs on the grinder, so here is a drop in adapter. The inside diameter is 60mm.
A heavy duty version of these… https://www.printables.com/model/546180-8-and-12-gram-co2-cartridge-clips It is tight enough that you need (I need) to put a thumb on one side, pointer finger on the lift tab, and two or three fingers on the…
Securely holds ten round tubes, including older (larger diameter) and newer (Empire) tubes. It has an o-ring gland, which could also be filled with a printed ring. The supports are part of the model so that it can be printed upright, and…
Meshmixer supports are included on one STL. An unsupported version is included. It is very tight to get into the frame. I use a needle file to trim the corners and edges just enough to snap the trigger inside the trigger guard. It doesn't…
Replacement regulator seat for the KP3 (and similar) regs Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: Ninjaflex TPU Notes: Original Ninjaflex has been tested. Also…
Intended to be printed entirely in TPU. The rings are not round and intended to flex when a cartridge is inserted. It may work in hard filament with a coating of rubber cement on the inside. I wouldn't bother with a metal printing. Print…
Besides making a softer jaw for these spring clamps, these stay on better and snap in. They can also be used as a base for other clamp mods (jaw angle, pipe clamps, mounts, etc.). The messy make photo is overextruded PETG with solid…
This fits many 12g changer pierce assemblies, including CCI. It is about 50% thicker than the CCI face seal, and when printed in Prusaflex, it is softer. It starts to seal before the pierce pin punctures the 12g, so you may not get the…
For mounting on an AGD Automag. 4/10/20 - added variations for tighter fit to classic rail and for printing somewhat easier in vertical. KeyMod holes still need patching in the two vertically slotted versions. 5/4/20 - KeyMod holes…
Designed to be printed on edge so that the lips are very strong. The lips also have a pair of teeth to grab the small groove on the edge of the card. For this reason, try to center the handle on the end of the card. It snaps onto the card…
It seems like the wood version of these always has a weak side from the grain. I think one printed in any good filament should be better. I recommend printing with minimum 4 or more layers all around (~2mm) and somewhere around at least…
Easy TPU print for replacement lens covers. Since the case fell apart, it needed something.
Sight rail for Emek paintball marker. Intended for use with an occluded sight (Armson), directly behind the feed neck. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: .15mm Infill: 20% Filament:…
These are inserts for the PM20 (90ml) prescription bottle and PM30 (135ml) prescription bottle to provide separation of a few weeks worth of multiple prescriptions and supplements for traveling. Three of them have no dispensing top; I've…
The nut should be just under 10 mm (yes, mixed units) across the flats. The washer is just under 16.55 mm x1.6 mm thick. The print stops about halfway through for the insertion of the parts. Recess is for a 10-32 button head screw. Under…
I needed a hook for light hanging that fit the short edge of our siding. The model fits 8mm or 5/16" hardiplank. Scale it if you have something a little different (thicker or thinner). These have only been out for a few weeks, but are…
Mount for a radial fan (XYJ05S5015H) for part cooling on a Makerfarm i3v (10"). It is mounted on the two hotend screws, on top of the hotend fan. This fan provides a lot of air, so a silicone sock on the original E3D v6 hotend lets you…
This is a back grip pad to be added to Dunnoo's paintball HPA bottle butt plate. https://www.thingiverse.com/thing:4354127 It looks small in the picture, but it meets at all edges. It might be a hair large. Print Settings Printer Brand:…
Puts a pull in the center of an art box drawer, making it easier to open and close with one hand without binding. Two pieces. Double-sided-tape the the back to the drawer, then slide the front in from the top. The gap at the top is for…
These are some replacement parts for 90's era Viewloader paintball loaders. The old impeller is for the original exposed servo drive which has a star shaped shaft. The other impeller is for the newer hexagonal servo drive. The lid ring is…
A paddle knob for the end of the ICD 12g CO2 changer lever arm. It fits directly on the end of the lever and has a hole that lines up with the one in the end of the lever. The sides are tapered for a better grip, and the long nose helps…
This is for an APP 50 paintball hopper. It helps keep the lid from popping open. The narrow side is made to interfere with the hinge and push the lid up and back, allowing the latch to hold better and not pop open from blow back, while…
Tactile replacement knob for dimmer control of espresso machines. The finger dish on the front allows you to judge the setting while watching the extraction. Depth of shaft pocket is set for the turn on/off length of dimmer. Stretch in…
It's hard to make a stick feed to fit many markers. These are .855 in paint tube diameter and fit autococker sized feed necks. The two oring grooves can be populated with different size orings for the fit you need, or use hard or soft…
It's called a dustcover, but I made it to keep my fingers off of the board while I'm using the knob. Print solid with the top down. It does not go all the way to the top-outside edges to allow for the screws. The island in the middle…
A collection of MakerFarm i3v remixed and modified parts. I liked the knob, but wanted the dimple for pushing. Added the anti-rub groove to the extruder and a lip for the front bearing, keeping the rest of the stock extruder. Included my…
These are all currently available results.
