Counting matching models…
This model is a 40 x 40 x 200 mm tower that will help you visualize the quality of your layers in the Z axis. There are raised letters at the base to show the X and Y axis. It is easy to resize in your slicer if you need it shorter or…
This version can be printed as is with no supports. I simply clipped off the bottom 2mm of the original file and uploaded it as a remix. This fits the CAP 1" chromed bars great. As a suggestion, it works fine on the CAP painted bars, but…
Update 3/5/23: I have added a wider bulb holder for the IOM/US1M style boats. I also added Star 45 boat arms, bulb holder, plates, and clamps. Update 2/4/22: I added a longer pipe catch piece to allow the stand to go into “narrow” mode.…
I used John Fisher’s Star 45 rev. 5 DXF files to generate a 3d model of the Star 45 frame layout as it would sit on your building board. I also used his fin and rudder (1/8" rod) DXF files for the foil plates. His rev1, rev2, and rev3…
update-2/10/2017- added a half hull model file suitable for printing or CNC I was cruising around on Thingiverse and noticed the STEAM challenges, particularly #makeitfloat. After just a few minutes reading about the contest, I knew…
Pretty simple print, should not need support. You can scale it a bit as needed to keep it proportional to your rings. Ladies rings may look better with this scaled down. Two walls and 25% or less infill should get you going. Update- I…
This is a set of numbers and class insignia that are designed to fit the IOM RC sailboat. They may be suitable for other classes as well. You can re-scale them as you see fit, but be aware that they may no longer fit the IOM…
This set of files are used for building the mold for making a carbon fiber keel for a one-meter sailboat. There is a full keel mold half STL file to use and modify for any format printing as you like. There are two split mold half STLs…
Made this for an Ender 5+. It is based on the Ender 5 design from the remix link, but uses heat set inserts.
This is a sturdy hook to hang things or use as cable management. It takes a good shove to get it on, but should twist off no problem. It should rotate on the pole, but still be snug fit. If it is too hard to get on you may need to file a…
Since I had some extra connectors from making the Bambu splitter, I whacked off and end of the Bambu it and drew up a mounting plate for 2020 extrusion. I screwed on the connector and mounted the holder with M3 screws and T-nuts. Holds my…
This is a carrier for the FlySky FS-ia6b receiver. It is designed for a sailboat, but may work for other projects as well. It is designed to position the antenna in the most favorable way (at 90º to each other and at the top of the hatch)…
I updated my 1911 checkering jig. The new jig is larger and has a wider guide area. I have also added a jig to help with the vertical lines too. Print this to be sturdy. 4 perimeters, 3-4 layers top and bottom, 30% fill or more. The STL…
-update- There is a newer version of this mold that uses a different core technique. https://www.printables.com/model/666103 ------------ This is a set of molds, cores and jigs to make your own molded carbon fiber rudder for an IOM or…
This is a ballast bulb holder that will help support your boat on the factory stand. It will prevent the weight of the fin and bulb from damaging the boat hull by hanging in the breeze. It will also help the boat stay on the stand if it…
This work cradle can fit many types of boat, but was designed to hold an IOM sailboat hull. I wanted a tabletop stand for holding the hull so that the deck, internals, and sails could be worked on easily during building. This cradle could…
A simple remix of the original. I scaled it down from 3mm to 2mm thick to give the outer ring more thread to hold.
This is a set of molds and cutting patterns to make your own molded carbon fiber rudder for an IOM or other one-meter R/C sailboat. I am calling this rudder Ikubi, named after a style of tip for a Japanese sword. The word "ikubi" comes…
I really wanted a scroll for the O'Cello so I found this wonderful violin print designed by bchan based on a Stradivarius and scaled it up to use as a base model to design and build the scroll.…
This has a taller pad than the original. In addition these pads have a 5° draft angle to help push down on the pot. The sliders have a loose fit and the original ones can actually push upward on the pot as they tighten. Also, it is…
Print a couple of these guides to help you drill your mast and booms. They are designed for 11mm round spars, such as the ones from Sailsetc or PG. The holes are 1.5mm. Just drill them out if you need a slightly larger hole. The top of…
This is a set of files for making a ballast bulb for an International One Meter (IOM) remote control sailboat. I have put together a build thread on bulb casting and mold-making using several techniques here:…
I made this ornament as a gift for my sister. She loves the Pirates! This was done as a three color print, pausing and swapping the filament colors midprint. Category: Sport & Outdoors
I designed a plug and mold for an RC Footy sailboat ballast bulb based on the designs for a US1M class boat. These files are intended to be CNC milled in aluminum, but you can print them as well to use as plugs for making molds. The…
This is an adjustable holder for the AC Infinity 69 Pro controller. It tilts forward and backward for easy reading. It works great on top of the tent or a desktop. I printed mine at 0.5mm layers with a 0.80 mm nozzle, but you can go…
This is a collection of parts and information that will help you build a Rig Box for your RC sailboat. This design fits the A, B, and C rigs for an IOM sailboat. You can lay out your own box and use many of these parts for your own needs.…
i got tired of accidentally knocking my DF95 and DF65 boat switch to ON and finding my battery was dead on multiple occasions. To help prevent this, I designed a lockout to keep the switch in the OFF position. It is a simple print that…
This is an STL for a set of matching mold locks to help align your mold halves for sand casting. They are about 60 x 75 mm. I print one for each side of the mold and screw it in. Category: R/C Vehicles
This project was started by members of a local RC yacht club. Based on their handmade rudder prototype and measurements (plus a slightly used stock rudder), I produced some CAD models. Currently, I am producing a couple of test prints for…
I don't have a Seawind, but the others guys I with sail with do. They have sharp hard noses that can cause trouble, so I designed and printed nose bumpers for them, because the boat I save may be my own! Pretty simple print, but the key…
Monitor mount
This is a base level conversion kit to make your DragonFlight 95 into a class legal US1M. This boat conversion is sometimes known as the Dragonstein.…
I remixed the handle from this model https://www.printables.com/model/761118-roller-handle-for-composite-molding This is a set of several rollers I created to fit the new handles. They are not remixes. There is wide serrated roller and a…
These are 2D files in several formats so that you can make your own stencils or stickers to apply to the Alioth IOM 3d printed boat. I included the hull numbers just so you could get a reference for the size. The font is 20mm Arial…
I have the rollers uploaded here since they are not remixes. https://www.printables.com/model/761155-roller-set-for-composites-roller-handle Printed in PLA. Make sure to use enough walls so that the fork area prints solid,
This is a ballast carrier for the Alioth IOM 3d printed RC Sailboat. It could be modified to fit other boats. It provides a simple way to carry brass ballast rods and also helps reinforce the keel area. These two brass rods are about…
I have created a set of files for use by everyone interested in making their own US1M bulb. These bulbs files are based on the current bulb and mold design used to cast ballast bulbs for the US1M class, but may be appropriate for other…
I have a 1999 and 2006 Chevrolet Tahoe. The key fob/unlocker remote doohickey has the same profile on both. I wanted something that would make them a bit different, so it would be easy to grab the right one. As a added bonus, it keeps one…
Customized version of http://www.thingiverse.com/thing:435802 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=435802 Instructions Using the following options: winding_thick = 20 small_radius = 15…
I made this as a holder for starting Rapid Rooter cubes, but it may work for others as well. It provides a stable base for germinating and growing your seedlings until they are ready to be planted. If you scaled this up, you can make it…
I am working on an Alioth 3D printed IOM sailboat and have made a few customized parts. This is a custom mount for an SMG100 winch servo. It also has an offset rear eyebolt hole so there is clearance for it and the 2.5mm mounting screw…
I made this ornament as a gift for my brother in law. He loves the Carolina Panthers! I wish I had the right filament color at the time to make a three-color print. I did make it in two colors by pausing the print and changing filament…
I wanted to make some slot covers to keep chips, parts, and tools from dropping into the bed slots and make cleaning a bit easier. These should sit just below the surface of the bed so they don’t interfere with anything. They pop right in…
These parts are used to manage your rigging during storage and transport. It is not uncommon to see twist ties and pipe cleaners used for this job, but these clips work well and look nice. They have a cutout that will allow your lines to…
This is a holder that slips around the Fatshark Dominator v2 battery and strap. Way cooler than a rubber band! Print at 50% or better fill with a couple of shells. The walls are thin, so you may need to adjust as needed. Category: R/C…
Made up a cookie cutter for a friend. This wheel really makes an impression! Thin 1.5mm walls so best for resin printer, but give it a shot on an FDM. Category: Other
Love the DK's. This is a print broken down into parts for you to make in different filament colors. Print with a couple of shells and under 30% infill The nozzle became clogged during the red print, but I didn't bother reprinting because…
My wife wanted one of these to make paper plant pots with, but could not find one she liked. This one is a bit taller, which helps the roots grow deeper. No supports needs. Just needs 3 walls and 20% infill.
The major reason for this remix was to a simpler 2-color print. The original generates lots of filament changes due to the color layout and structure of the model. I have recut the model so there is only one swap from base to top color.…
These hooks have holes for a 6mm wire. This is the diameter of the shelf wire used in Lowe's free-standing wire shelving racks. (The chrome or black kind, not closet shelving) Printed a bunch of these to hang doodads and small tools from…
This is a 5010 fan mount for 35mm DIN rails. The DIN clip part is based on the DIN mount clips for the Zerog Mercury One.1 printer and there is no direct remix link for that, but here is the site. https://zerog.one/
This is a set of sailmaking blocks based on Swede Johnson's designs. I have several formats available, even a photocopy of the original drawings and instructions. I have his original drawings, but using modern CAD software, I faired his…
This set of files is used for making a cover for the aft hatch frame on the Alioth IOM from https://rcsailinglab.com There are two sizes of cover. A regular one that covers the printed hatch frame and also a LONG version that extends to…
This original model is cool, but I wanted to make a few mods. The model is now skeletonized. The model is rotated for dropping onto a printbed. The model now has small chamfers on the bottom to help hide "squishing" in the first couple of…
Remixed from Nudel_P's Bat Clothespeg. The original was too tall to use my clothespin springs. So I made it less tall and added a slot for the spring end. Also the walls around the wings were too thin and tended to not get printed, so I…
Customized version of https://www.thingiverse.com/thing:2537701 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2537701 Instructions Using the following options: outerD = 15.0 innerD = 4.73…
This is a remixed version of the file available from RC Sailing Lab designed by Juan Egea for the Alioth 3D printed remote control sailboat. https://rcsailinglab.com/product-category/3d-repository/ This mount has a thickened servo…
This is a set of parts to help install a Sailsetc IOM bulb. It includes drilling guides to assist with placing holes in the bulb. There are also several insert designs. -One that is angled with a fin cutout at a 1.75 degree angle for…
This rudder support is designed to fit the Sailsetc nylon rudder trunking. This particular design is made to fit the Alioth 3D printed IOM, but may fit your RC sailboat too. The full build for this sailboat is here:…
This is a stubby style knob for your tap handle. I have my knob mounted on a chrome angled tap handle adapter for a bit of extra height. The shorter design is great if you have a keezer or limited height above your taps. This design has…
I designed these to go with my flexible build plate from Wham Bam Systems. They definitely fit the M2. I am not sure about the M3 and others. If you can verify the fit for other printers, let me know in the comments.…
This dice uses the symbols for the first six elements on the periodic table to represent the numbers 1-6. I designed this for a science game my daughter made. This is a cool looking print, but if you have a filament printer, it better be…
These are skids are an accessory for Gyrobot's quad frame the Spyda 500. http://www.thingiverse.com/thing:160607 I have designed version 2! http://www.thingiverse.com/thing:897644 I was hoping the Crossfire quadcopter skids would fit, but…
This was fun to give as a gift. It is scaled 50% on x,y,z-axis in the picture. If you have a filament printer, a 50% scaling on the x and y is the most you might want to go. The walls become just one inner and outer shell. Customized…
I wanted an iPad Air holder for the shelf that holds my computer stuff. I can use the iPad as a second monitor or just use the IPad Air as separate browser or app or whatever. This holder should fit many Ipad models from Mini, to Air, to…
This was something fun I drew up using Sculpt123D for the first time. It's a monster head, but I didn't want something necessarily scary. This guy has stopped to close his eyes and take a sniff of something horrifically wonderful! Print…
This is an induction probe mount for auto bed leveling for the MPCNC and Mk8 extruder. It is the original MK8 extruder mount, unchanged except for the addition of the mounting tab. This is the probe I used, purchased from Amazon .…
This is an LED candle holder that will fit the Eno Shy-Light. It may fit the other styles as well, I am not sure. It simply snaps into the bottom, so light and shade are one portable unit. This is designed to fit very small flickering LED…
I designed an improved set of skids from my previous version, which were too lightly designed. http://www.thingiverse.com/thing:396403 Everything is beefed up. This fits the Imperial measurement version of the Spyda500. However, the cross…
This fits a 25mm handlebar and will fit an iPhone 5s in an Otterbox Commuter case. Does a pretty decent job of it. I wish the uprights were a bit thicker. I used some superglue to lock it together and plastic zip ties to secure it to the…
My wife needed an adapter to finish off a cool yard light. It didn't take long to find this one on Thingiverse. I used Rhino3d to Boolean out a larger hole than the original size to fit the solar light base. We used an old brass…
This tool is intended for bending RC sailboat masts. It is specifically designed for the common 11.1 mm thin wall tempered aluminum masts seen in IOM-class sailboats. You need to print: Frame sides x 2 Lower roller set x 2 Bearing spacer…
This a cover for the 3mm adjuster nut used on IOM sailboat shrouds. This allows you to use your fingers instead of a tool for changing the location. It can be used for other sailboats and many other things as well. It is designed to fit a…
I wanted a little stand for my R/C model sailboat, so I designed one. This stand can be glued together or packed flat, but it is so petite, I will probably just glue it up. I have designed the cradle area with several millimeters of…
This is a case and camera holder for the Canakit Rasperry Pi 2 case. I needed a case that would clip onto my Lowe's shelf support 25.5mm tube so I could use it monitor my 3d printer. I have also included the file without the support arms,…
This is the Z-axis drag chain mount that matches the XY-axis set I designed here. http://www.thingiverse.com/thing:1272581 I made EMT clampholes for 4 bolts and nuts, but you only need to use two in each one. No seriously, stop tightening…
Remix of Hockenmaiers M2 Filament guide. I used his guide for a while but it does not feed well with the larger than stock guide tube. I only use the middle hole, so removed the others and clipped off the end. I also completely redid the…
Customized version of http://www.thingiverse.com/thing:347425 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=347425 Instructions Using the following options: Taper = 10 Twist = 342 Thickness = 2 Height =…
This is a set of lids, bottoms, and resting trays for the Epax X1 resin printer. The interior top lid is for use when the vat is in the printer. It has cutouts on the side for the X1 hold down brackets. The top cover has a light safe…
A nice little cap for the Z- axis of the MPCNC. This fits 23.5mm EMT, but if you scale it up a bit, it should fit the MPCNC-IE version tubing. If you don't know what an MPCNC is and just want a cap for any old tubing, just scale this…
This is an Iphone mount for the 5S in an Otterbox Commuter case. It will hold it, but do not count on it as 100% secure, use a strap to hold the phone to the carrier and consider putting cable ties through the bobbins. It attaches to this…
I remixed these so that you can sit the headset down and the battery mount does not pop off. This fits the Oculus Quest with Vive Deluxe Audio Strap and Anker 10000 PD+ battery. Mine are based on the 25 x 50 mounting clips from Jorg. I…
This is a 40mm bed fan and duct for a Makergear M2 with a v4 head. The usual fan is 50mm, but I wanted dual Noctua fans for silent running. I also switched out the power supply fan for a 60mm Noctua and added Astrosyn dampers on the…
I designed this as a mount for my Dropcam. If you print this, you may have to sand or file the tapered end of the plate a bit to get it to fit into the slot on the clamp. There is no reason you could not print this in one piece. I just…
This is a design for a resin 3D printed mold using Thermacast resin. This is a special heat tolerant resin from Monocure that can be used for casting metal with a somewhat low-temperature melting point like pewter. More info here:…
This is a trophy I based on the logo I designed for the Wilson Homebrewing Club. We awarded it to the winner of our annual brewing competiton. Printed with two shells at 30% fill. Category: Signs & Logos
This design includes plans to make a rig box in wood and 3D printed fittings. There are 2 rig box designs in each PDF. The PDFs give the corner angles so you will know which corner STLs to use based on your box. This box looks like it…
This is a two part mount for the Blade 200 qx quadcopter. I wanted a camera mount that faces down, so I designed one. It is in two pieces, so you can use the main mount as a platform for your own designs. This may not need supports,…
These are all currently available results.
