Counting matching models…
I am attaching the STEP file for possible modifications. It is not HSW compatible. Recommended print settings: PLA, 0.6 nozzle, height 0.42 mm, 2 perimeters, gyroid infill 15%, 4 layers top and bottom, and no support
Designed for tools supplied with the printer and https://www.printables.com/model/1425722 I added space for tweezers and free space for glue or lubricant. I printed from TPU with the bottom side up, without supports – I wanted to try…
I didn't like the loose lid, so I made hinges with a stopper and a ventilation stopper for PLA printing. Printed in one piece. You need two pieces, one of which needs to be mirrored. I use 4mm thick plexiglass for the top cover, I don't…
Sealing ring for AD5X Dry Boxes from Flashforge.
I am attaching a 3mf file for Orcaslicer. Important! Set up the slicer according to this description. Set 0 layers at the bottom and top and 0 perimeters globally. Then add modifiers according to height and add approx. 5 perimeters to a…
Tlumič hluku přepadu pro mořská i sladkovodní akvária. Model je navržen pro maximálně jednoduchý tisk bez podpěr. Montáž je rychlá a intuitivní – stačí složit a nasadit na přepadovou trubku. Ověřeno dlouholetým provozem. Hlavní výhody:…
Detergent Powder Container & Dispenser Practical container with integrated mechanical dispenser for powder detergents. Enables clean, accurate, and repeatable dispensing. Suitable for placement on a washing machine, shelf, or in a…
An egg-shaped bird feeder model created using a Voronoi algorithm. The geometry is optimized to provide sufficient rigidity while maintaining an intricate, open structure. Four large circular openings (approx. 60 mm diameter) serve as the…
PETG Layer 0.28 100mm/sec 5mm Brim
Automation for TMC reef roller. Automatically moves the filter fleece when the water level reaches the set level. What you need: Piece of PVC-U pipe 32mm Printed parts Motor with gearbox approx. 10-30 rpm, 25mm diameter Float switch…
Simply print and attach to the threaded rod screwed into the AZ-GTI using 4xM12 nuts. Material: Printed parts (PETG, 0.2 - 0.3 mm layer, 20% infill} 4x M12 nuts M12 threaded rod approx. 260mm for iPad mini4
Fluidized bed for bio-pellets and other media reactor. No dead zones, requires smaller pump. Diameter 86 mm, 94 mm for 90 or 100 mm reactor, source code attached. Print preferably from natural PLA or PETG, layer 0.15 - 0.2, no supports,…
Minimalistický stojan určený pro bezpečné a přehledné uložení čtyř zkumavek. Konstrukce je tvořena dvěma bočnicemi a dvěma vodorovnými držáky – horní deska slouží pro vedení zkumavek a spodní je stabilně opírá. Díky tomu zkumavky stojí…
Praktická pěstební miska určená pro výsev a předpěstování sazenic na okenním parapetu. Miska je navržená pro pěstební kostky 22×22 mm , obsahuje průhledný kryt pro udržení vlhkosti, nožičky pro zvýšení celé sestavy a zalévací otvor pro…
Print with supports, with the smallest possible layer and as accurately as possible. Material ABS or PETG, Black. You need one short threaded insert M4.
Custom-designed intake strainer for the pump of the Tunze DOC Skimmer 9415. The part serves as a protective suction basket, preventing debris, livestock, and larger particles from entering the pump while maintaining adequate water flow.…
These are all currently available results.
