Counting matching models…
I modified original model: Switched to Pi3 and other compatible with it Screen replaced with: GMT020-02-7P v1.3 Top 2 button holes were removed Added standoffs and legs For other non-modified parts you will have to download them from…
I decided to try and implement extruder from my K1C into DB8 toolhead and I was successful! Compatibility - This adapter will work with any hotends made for K1 series including: K1 hotend K1C hotend Microswiss Flowtech Trianglelab's…
Generic powerstrip mount, designed to be mounted "flat" in order to not increase overall height as much as possible.
Due to original conversion for Linear Rail on X only not containing all parts (Motor mounts and tensioners) I modified ones for full conversion to use Rods from Y axis. I uploaded only the modified parts , for the rest of them you will…
In short I made mount for “Sherpa Micro Flathead” which uses altered gears (filament path). This is a mount for the Dragon Burner but in case you want to make your own Step file is included, here are some references for lazy people like me:
This is rigid and low cost variant for microphone arm, only thing you need is very common IKEA's Tertial lamp and few additional nuts and bolts. (Voron 0 friendly design) Rough cost of this conversion is ~8$, tested/recommended material…
Important! Tiny model with tight tolerances, threads don't work it's pressure fit. Feel free to try several materials but for me worked PETG no Supports and 0.1 Layer Height. Design around generic/cheap 3.5mm aux jack. Originally I wanted…
IMPORTANT: This is draft of the idea that I had, so if you want it refined please comment or just do it yourself via provided step file. This print is replacing bottom cover of the charger and adding power switch which you need to wire…
These are only Gantry parts for K1 series conversion to Dragonburner, additional modifications to heatbed and tophat may and most likely will be required. (Tested on Creality K1C model) In case you are only interested in X-Rail only…
BOM: 1x 24V Led Power Supply (~200mm in length; max 205mm) example: https://www.aliexpress.com/item/1005004381821944.html 10x M3x4x5 Heat Inserts 1x IEC 60320 C14 male power inlet 1x SPST KCD1 Power Switch 4x M3 Rubber foot example:…
!WARNING! This mount requires permanent modification (filing corners down) in order to fit properly, otherwise Dragonburner mounting screws would be blocked. I had to use option with wide spread of mounting holes due to size of heatsink,…
Update 24.06.2024 - After some testing I realized that mounting to the toolhead was too weak and added some more material on the bottom side, first version was moved to the folder to avoid confusion. Second version uses 2xM3 18mm FHCS.…
First time uploading here 🍀 This is base for fume extractor (or ventilator if you chose so) it's made from two coolers from Xbox 360 glued together. Base is hollowed out for electronics and battery, there is spot for generic PCB with…
I created simple wall mounted holder in order to make it easy to use and store. I designed holes for generic M3 screws but in general a lot of small ones from my parts bin work! Due to mistake during measuring the hole is lower than it…
IMPORTANT - THIS IS ONLY A CONCEPT AND NOT FUNCTIONAL DESIGN I spent a lot of time designing this box and at the end I figured out that regular 18650 batteries won't work due to huge current spikes at the moment of weld, but I figured…
Generic stylus for old GPS with resistive touch screen.
For very specific use case. I wanted to angle my clock so that I can look up at it (on shelf) while sitting down, that means this angle wont be optimal or even usable when standing/being above it but intended angle works great. Some…
Not much to say, simple wall mount.
You will need 8 heat inserts to assemble it properly, designed for Voron spec heatset inserts and headband in pictures is for " SteelSeries Arctis Nova Pro/Nova 7 Nova 3 " on Aliexpress. Cans did not fit properly (did not cover bottom of…
I specifically designed this mount to be used along with LIBRA Extruder - Dragonburner Mount , other extruders may or may not work so you should for sure check if it fits in CAD tool. This model is part of 3 steps that you could follow…
Due to Dragonburner modification I made stock heatbed is sitting too low (2-3mm) and toolhead is not reaching it - that is at least simple fix, just print and add spacer I made under springs before inserting them back. However there is…
These are all currently available results.
