Counting matching models…
This is a cheap FPV gimbal for pan/tilt axis. This is designed around common servo, easily found in every online marketplace. The camera used is a old Eachine 1000TVL, but a found the exact same with a different brand. Adaptator for…
UPDATE 15/03/25 : added a v2 with bigger outer zone to fill with gyroid pattern. I printed it with 3% infill to have a really soft insert. Print with TPU, no support, no top and bottom layers. Gyroid infill, like 3%. You can experiment…
This is a small hobby grade 1/43 crawler, that i named "Smawler". Say welcome to desktop/couch crawling, everywhere. UPDATE 03/06/2026 : Open Sourcing the model. Feel free to clone/modify/share the model. Please give credits if sharing.…
GT2 Belt Gearbox for Landy/Rancher/Bamboo 3DSets models. Use it with my Metal transmission, gears and axles mod This gearbox has a ratio of 4:1. Paired with the AR44 33/8T gears, it is the same overall ratio as original 3DSets model. You…
Modifications to 3DSets Landy Wagon (and other 3DSets models) to go to metal transmission from gearbox to wheel, using Thumper axles Use in combination with Gearbox with 3D Printed pulley and Metal output GT2/Metal pulleys gearbox UPDATE…
Compatible with D3530/D3542 motor with 3 screw, spaced by 16mm, like this one https://fr.aliexpress.com/item/1005006159885118.html Use 3x M2.5x4mm screw directly on motor rotating cage. Print D35XX pulley, Remove integrated support. (red…
Use a M5x45 screw with head cuted, or a treaded M5 rod. You need 2x M5 nuts. Print the output pulley and assemble like 3Dsets manual describe. Cut a M5 rod or a M5 screw to have approx 10mm each side. Threaded rod or screw have to be…
Custom tailgate for Thumper 1/8 to use extended batteries. Link to original model : https://www.printables.com/model/323433-thumper-18-scale-rc-car-cj7-rock-crawler-by-blackc Build is straigthforward, use M3 screws to assemble all parts.…
This is the rear part for the SandPiper 1:8 (by Black Crow) for a "naked" style spoiler support removed cut to look less sharp and show the rollbars It replace the original 26BodyReaRS.stl and you don't have to print (27SpoilerRear.stl,…
2.2 beadlock rims. Used in picture with 120mm tire. Print the two inner parts, no support needed, and join them with 4X M2x12 screws. Insert into tires ( compatible with my TPU insert V2 ), put the lip of the tire inside the hole, then…
This is a mount for the Thumper 1:8 from Black Crow to make a head tracked fpv car. Replace the seat of your choice by this mount. Install the gimbal on top of it. You can see it in action on this first try video :
2.2 inch rims for Thumper 1/8. Link to original model : https://www.printables.com/model/323433-thumper-18-scale-rc-car-cj7-rock-crawler-by-blackc EDIT 28/01/25 : look like there is different design of inner wheel. The one i used is from…
Link to original model : https://www.printables.com/model/323433-thumper-18-scale-rc-car-cj7-rock-crawler-by-blackc Front bumper with integrated supports for this cheap but cool light from aliexpress:…
This is a stadium to play Rocket League in real life, with RC 1/43 cars. Cars an ball are not included. Walls are rounded so car can drive on them, and ball will not be stuck. I made a video on our first try. We were not experienced but…
This is a modded gearbox for the SandPiper 1:8 (by Black Crow) to fit a SCT Sidewinder. This motor is high KV (3800), so i run and 2S, with greater gear ratio, and smaller 95mm tires. With this configuration, this is drivable, the motor…
Link to original model : https://www.printables.com/model/323433-thumper-18-scale-rc-car-cj7-rock-crawler-by-blackc Link to the high clearance mod : https://www.printables.com/model/1217597-high-clearance-mod-for-thumper-rc-4x4-crawler…
This is a mount for the Sandpiper from Black Crow to make a head tracked fpv car. Replace the cockpit by this mount. Install the gimbal on top of it. Use the low profile version Bonus a VTX box suitable for my need (Eachine ET200 VTX).…
Use 4X M2x6 screw to assemble cover Install in the car and use 2x M2x10 screw to secure with mount
Link to original model A simple mount to clic to seat. Position of a driver head. Print with tree support, clip on the side to have layer adhesion perpendicular to small arms (see photo). Best to print in PETG for flex and temperature of…
These are all currently available results.
