Counting matching models…
I really liked Silencer \ suppressor \ moderator (lead dust collector) for airgun by Masochisti , but wanted it in one easily printable piece. I don't have any 40mm tube around and printing tubes on their own has given me a bad taste. I…
Just a test of my modelling abilities. Works well. I basically wanted something that would print very nicely. Requires 2x M5x30 bolts and M5 nuts. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: Yes Supports: Yes…
I loved puhlbo's PCP Airgun Moderator / Suppressor but wanted to be able to print with less material and in less time. This answers that. Seems to work very well on a 6 FT LB air arms S200. I don't have a db tester, but it definitely…
Air rifle moderator, for use with sound dampening felt or foam . 193mm overall length, the tube is 185mm long, 40mm outer diameter, 36mm inner diameter, each cap extends 4mm out of the tube. Inspired by the many aftermarket designs that…
I love puhlbo's PCP Airgun Moderator / Suppressor , and my one piece remix works, but wanted something quieter. As the original does a very good job of reducing sound, I took the original files as a base, and doubled the number of…
Cheap plastic snap caps for 22 rimfire are great but imperfect sometimes. Sometimes they are a bit short or too thin. If demonstrating safely loading a magazine for example, you need a something full length. These printed ones are a bit…
I printed soda can lid by tmorris9 but it breaks a little easily during normal use, so I made the model a little more rugged. The actual fit on normal cans is great. As of yet I have not printed, I've just added material to prevent…
Chess set, each piece is Dwayne "The Rock" Johnson. The rook and knight are my favourites. Made this as a present ages ago, didn't upload it at the time. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No…
Wanted a better zip for a bag, so it could be locked shut. This enables that. I love the original design ! Tried to keep it close to the original in terms of style, I think I did that pretty successfully. The chamfer around the edge, and…
I love Crosman 1377 / 1322 Silencer Adaptor by k19k19 , but I printed it and adjusted the design multiple times and just couldn't get a model strong enough or that would print cleanly and nicely enough. So I remade it from scratch with…
Little part to fit a plastic bottle to an airsoft gun or airgun - files threaded for the standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF standard are included. This is to make a prop. While a big bottle has a…
Many of the designs on here for mounting a rail on the 1377 are rather imperfect, rely on disassembly of the pistol, have model errors, are low resolution, or incorrect dimensions. This solves the issue for me. I wanted a screwless, low…
Simple funnel for easily filling a hip flask. Other designs had spouts that were longer than necessary, so designed my own simpler and smaller design. The spout is 10mm wide, as my hip flask has an 11mm tube. 3D printed items should not…
I really like Hand Stop by Dragonite0011 but I lack grub screws, also I don't want to harm the rail. This works. On the model the nuts are on the right and the bolts inserts on the left. Flip to your preference, I guess. Requires 2x M5x25…
I dislike most gunstocks for the Oculus Quest 2, most are unwieldy or the controller feels like it will fall out easily. I had some Nerf stocks lying around that are fairly comfy and variable in size, this works very well, it's great.…
Silencer adaptor for use with Weihrauch HW40/Beeman P17. Fits 1/2-20 UNF threaded moderators. Held in by friction. The options to use a suppressor with the HW40 were limited. This works pretty well. Only issue is that when attached, a…
11mm / 3/8th inch dovetail rail to picatinny rail adaptor. I like the options available on Thingiverse for rail adapters, but most of them raise the scope too much. This design gives me the ability to mount picatinny optics easily without…
I really liked MysticalDork's Umarex Gauntlet integrated moderator , and wanted to test to see how well it would work on other airguns. I had mixed results - seems to work to reduce sound (though less than an enclosed unit), but I am…
Pretty much just for fun, an item for aesthetics. Little part to fit a standard coke can to an airsoft gun or airgun - files threaded for the standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF standard are included.…
Adaptor to be able to attach Picatinny accessories to a UIT rail. 64.75mm overall length. Requires a UIT Plate and an M5 x 8mm bolt. I designed this to be able to make use of the UIT rail on a rifle that wasn't being used for prone…
I love the original Crosman Pump Arm with Wide Grip by Gecko23 but it would not fit my Crosman 1377, I guess Crosman changed the design at some point. Maybe that applies to the 1322 as we. I made some changes to the original design to…
11mm Dovetail rail replacement for the Remington Express air rifle's rear sight. Uses the existing holes in the receiver that the sight originally mounted with. The many holes in the mount are for scope stop pins, which are on a lot of…
Same as my original design ( Loudener for airsoft / airgun ) but threaded for 1/2x28. Again, just a joke item. Category: Sport & Outdoors
Designed this in January and forgot to upload. I was surprised at the complete lack of options at the time so made this, which works well. Held in with a single bolt and nut, which feels like a pretty sturdy fit. Fit is snug and secure.…
I dislike most gunstocks for the Oculus Quest 2, most are unwieldy or the controller feels like it will fall out easily. My original design works great but I am on the shorter side, and this actually is a bit comfier for me. I am really…
Pretty much just a joke item. Threaded for both standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF. No idea if it would actually work. Hope you have fun with it. I suppose if you actually had a muzzle loading airsoft…
I dislike most gunstocks for the Oculus Quest 2, most are unwieldy or the controller feels like it will fall out easily. My original design works great but I am on the shorter side, and this actually is a bit comfier for me. My second…
Couldn't find a design to fit a 30mm scope to a 9-11mm dovetail rail, so made one. This seems to work fine for holding an old Gamo red dot scope to an HW40. Two sizes included - normal and thin. I recommend the normal size. I printed both…
Requires 2x M5x12mm bolts and nuts. Though the friction fit is really good. The fit is really good. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: Yes Supports: Yes Resolution: 0.2mm Infill: 20% Filament: eSun PLA+…
Massive improvement upon my previous design . It wobbled a lot more than is ideal, and didn't stay as it should have. This does not wobble at all. Also requires half the number of nuts and bolts. My Barrel Mounted 9-11mm Dovetail rail…
Requires 2x or 4x M5x12 bolts and nuts. A variation of mounts included. I recommend double screw mounts, over single screw. You'll probably want to make a mirrored copy of your chosen fine in your slicer (Press M in Cura). I've provided a…
Chamber safety indicator flag for use with an air pistol. To show there is no pellet loaded and there are no barrel obstructions, a flag which goes the full length of the barrel an protrudes from both ends should be used. The tube itself…
Picatinny rail replacement for the Remington Express air rifle's rear sight. Uses the existing holes in the receiver that the sight originally mounted with. You should be able to reuse the original sight screws (though you'll still need…
Scope rings to fit a 25.4mm/1 inch scope on a nerf attachment rail. I have some cheap nasty 25.4mm/1 inch scopes, this seems as good a use for them as any other. Using the tighter rings, I get pretty solid clamping force. Each pair of…
Sound moderator/Silencer/Suppressor adaptor for airgun. 2 pieces. Requires 4 x M3 x 28mm (or longer) bolts and nuts. To assemble, put the insert (Insert.stl) part into the adaptor part (Adapter.stl). Once tight and secure, put onto the…
My Lenovo Thinkpad T420 came with a 7mm drive and appropriate rubber rails, but I wanted to fit a 9.5mm drive in. This solves that. I guess this would be most like the original if you printed in TPU, but I printed in PLA+. I think the…
I like the original lab scoop , but it was a little short, and I found the print layers lead to powder getting stuck more than is ideal. Made it longer and made two versions, the closed-head one should prevent stuff getting stuck as much…
Replacement part for a old Nerf blaster toy. The original bolt handle came off due to the insides breaking (should look like this but the part that contacts the metal was broken off entirely). I wanted to replace the just broken part. I…
Adaptor to fit an old style 1377 stock to new style Crosman air pistols. Was given an old 1377, the stock does not fit a new Crosman 1377, due to major design changes. Through a lot of trial and error, got a solution to fit it. Pretty…
Parametric files to make something to fit on a nerf rail, and adaptable. Fusion 360 file included. To change the parameters, have a look at this . Basically* Design > Modify > Change Parameters *. Category: Toy & Game Accessories
Scope rings to fit a 30mm scope on a nerf attachment rail. I have a Gamo 30mm red dot, this seemed like as good a use for it as any other. Using the tighter rings, I get pretty solid clamping force. Each pair of scope rings requires two…
Box for holding 3 Air Arms S200/CZ 200 Magazines. Assembly: Put the lid on the box, and slide the pin in from the left side. I recommend you add a dab of glue to either side of the pin afterwards to keep it there. Use supports for…
Silly accessory for an old toy nerf blaster. Pretty much just a joke item. Obviously meant to look like the one from a certain popular cartoon . Combined a couple of things. Just a bit of fun! I doubt very much this works unless you have…
Measured up a rear sight to be able to make a custom version of it. Here is the model. Should be pretty much 1:1 with real dimensions. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.12mm…
I'm unhappy with how this has turned out, it wobbles too much to be useful. Use my updated design, V2 which clamps to the barrel properly and securely. It is a great improvement. For mounting a dovetail optic on a barrel. Either on the…
Little part to fit an aerosol can to an airsoft gun or airgun - files threaded for the standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF standard are included. This is to make a prop. While an average aerosol can…
Small part for securing a bubble level to a 9-11mm dovetail rail. Nothing special, but I can't see another design like this online elsewhere. I had a little 25mm x 10mm bubble level cylinder lying around, and thought it would be a good…
Print on its side, the flat side. Hook to attach my phone holder to the cupholder. This enables me to have it to hand whenever I need it, while still being able to use cupholders and keep it out of other storage areas. I have a Belkin…
Remix of B.O.S.S. - Bottle Opener Seatbelt Silencer , which uses a US dime, which I don't have. Closest coin is a UK 5p so I've gone with that. Dimensions have been changed from 17.9mm diameter x 1.4 height (a US dime) to 18mm x 1.89mm (a…
Test piece to fit something to a nerf barrel end to extend it. Just a bit of fun. Included is the Fusion 360 file for doing whatever you want with it. The dimensions images should be pretty useful on their own. Print Settings Printer…
A little piece to enable attachment of stuff to the Well G11 airsoft gun. Including the Fusion 360 file to enable customisation. The thread on the Well G11 or Well G11-A1 airsoft gun is very weird. Some websites say "CW 28mm", some say…
Picatinny Rail Barrel Extension for the Well G11 airsoft gun. There's no ability to mount a sight or light or laser or anything on one, this gives the ability to do so. The Well G11 has a weird propriety rail. This should do the job. Two…
My previous attempts for mounting scopes directly to the barrel of my Remington Express were lacking. This however, is excellent. I am quite proud of it. Requires 3 x M6x25 bolts and M6 nuts, plus the screws the sight was mounted with in…
I have no intention of using the fingerprint reader on a refurbished L390 I purchased. As such, blocking it physically seems like a good idea to prevent it rubbing against my wrist during normal usage. So this printed out, plus some black…
Friend needed a replacement part, I did my best to model it and print it for him. Apparently these break somewhat often, so hopefully this model of use to more people. Couldn't find a lot of information online about it. It's the linkage…
Fun item for making a can fit on the end of a friend's Well G11-A1 airsoft gun. The thread on the Well G11-A1 airsoft gun is very weird. Some websites say "CW 28mm", some say "Dx 28mm", some say "dextro-gyrate 28mm", which all don't seem…
Was given a non functional Webley Stinger, missing the grips, and the screw that holds the piece that holds the barrel in place. Grips are entirely impossible to source, so I have made new ones. Requires an M5x25 bolt and M5 nut. To…
What? Just a joke item. I imagine if you have a 48mm tube to mount stuff on with a picatinny rail, this would do the job. Requires an M5x15mm bolt and M5 nut. I made this just as a 5 minute joke. I bought a Nanssigy brand one, model…
This ring has a slot to hold a single 1.5mm x 6mm vial of tritium. It is nice to fiddle with or play with in the dark. Could be useful on a keychain. When you print it, I recommend inserting the vial while the model is still warm, so that…
Unloading tool for S200/CZ 200/Altaros SA Assassin magazines. While it's unlikely you will ever have to try it, but when you have to do it, it is annoying and time consuming to extract pellets individually from a tiny magazine, and most…
This is a remix of https://www.thingiverse.com/thing:4774293 . My friend asked for a change to this model. The original model is great, but the rail dimensions are not right for MIL-STD-1913 picatinny. The angles and dimensions are quite…
Base extender for a couple of wine glasses including a champagne flute so can be left on slightly non-flat surfaces, like on a sofa cushion. The extension widens the base and should make it harder to knock a precariously place glass over.…
These are all currently available results.
