Counting matching models…
UPDATE: 6/3/26 added STL of longer version at user request (+ 50 mm, about 210 mm total) This model is a printable version of the rainbird style drip irrigation stake. The center hole is sized for floraflex ¼ drip line. The orange stake…
Updated 4/1/25: At user request added ¼" hole spacing and a 10mm version for smaller seeds. While i was editing the model i also made a few other variations. I found the original a little small for some of the garlic i was planting so…
This mount sits on a PBC and avoids the circuitry on the bottom side of the OLED board to give it a firm mounting to the board without having to use brass standoffs. You can either screw the oleds down with m2 screws, or slip a segment of…
printed with 3 walls and 35% infill. at 60mm/s this print takes roughly 45 minutes at 0.15 layer height. the print is designed with a slight taper on the faces that meet the coin and the diameter is slightly undersized to apply pressure…
Updated 7-4-24: fixed void inside the model that made it prone to snapping at the corners and also improved the zip tie hole geometry. Part can print without supports now. Also added a model with 16 clips joined together for easier bed…
A mount to support the water solenoid valve shown in the attached images. Fusion files included if you want to make changes. You will need 2-4 M2 inserts for assembly and M2 bolts for mounting your valve.
Edit: 3/5/25 Added new images (green models in images) to show the latest version of the parts and new STL and STEP files for the 2 new pieces. The horn to valve knob adapter is unchanged. This version has a few mm of slide to accommodate…
We had a few of these get chewed up by our dogs so i modeled a replacement that can be printed. these are modeled exactly off of an existing figure so all dimensions should be very close to original. i shaved 0.1 or 0.2 mm off the…
this model uses one or more 12x5x3 magnets to hold a standard home door key above a door frame. the interior angle of the model is 91 degrees to account for some out of squareness in the door frame and the magnet pockets are slightly…
This is a combination of 1/2" EMT conduit hardware that ive made for various projects. All parts with screw holes are made to work with M3 hardware and 5.5mm square nuts. The ID of the splined holes in these fits snugly on the tubing. If…
I got a closet dresser from amazon and was surprised that the only racking support were 6" cardboard triangles you staple to the corners. The dresser immediately racked and made the drawers jam. I made these braces to reinforce the…
I wanted a small blower for my firepit. This is a printed and tested model, everything fits an works as currently designed and uploaded. You will need to print the shaft spacer last so you can measure its height, and scale it vertically…
new / replacement rocket for foot powered air rockets. While looking for the picture of the kids toy i modeled this for, i saw many similar toys that were almost identical so this rocket model will probably fit most of these similar toys.…
there are 2 different models included. The smaller one is not as resistant to belt slip as the larger one. The larger one is strong enough to hold the belt under as much tension as my printer is capable of putting on the belt so it will…
I have thick 1.25" shelves around a large south facing window that i wanted to hang plants from without putting holes in the shelves. I printed this to mount on the shelf allowing for 2 hanging position based on the size of the basket.…
EDIT: it looks like home depot no longer offers these as "Husky" or "anvil" brand. there is a new HDX brand that is slightly longer (12.8"). I bought the new HDX organizers and they fit the existing inserts, though it seems the new boxes…
This is made to hold chalk pens at an angle. Mount to a wall or any surface. will fit on a 225mm build plate diagonally. You can print multiple and mount them size by side, or top to bottom to store more markers. the holes are keyed to…
a simple mount to hold the front tire of a kids trike and hang if off a wall. The mount should be printed as shown in the image of cura slicer included for strongest layers, there is also a hole for a 50-55mm M3 screw on both sides of the…
a simple cap to act as a variable humidity dome for seedlings and small plants. the baffle has a slight raised perimeter on one side, this should be printed up so you don't need supports, and installed down to allow the screw to tension…
These are all currently available results.
