Counting matching models…
This is a remix of https://www.thingiverse.com/thing:1213459 My appologies to the original designer for not including the link to his model originally, as I was unable to locate the original when I posted. For use as a Center Finder;…
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
Print-In-Place with no additional hardware required, making it's easily scalable up or down . All of the credit for this design should go to the original designer: https://www.printables.com/model/565344-automatic-rope-tensioner I've just…
Print approx. €1.69–€2.06 excl. taxPreliminary estimate for one variant
I wanted a textured surface on my print, so I remixed this to be able to print the parts laying flat on the 180x180mm bed. You'll need to print them with supports, but without a skirt or brim when printing on a Mini/Mini+; after which…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
In addition to this print, you'll need to eat a couple of boxes of Ferrero Roche. Print supports are required for the Tray! For the Pot Inserts, I printed mine in Spiral/Vase mode using a 0.4mm nozzle with the extrusion width set to 1.0mm…
Measures outside radii from 13mm to 18mm plus a couple of inside radii of 7mm and 9mm The g-code file does a colour change at around 19 minutes. Note: The last time I'd tried it, Octoprint with the Mini didn't properly pause for the…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
A better fit for your YETI Rambler Colster in a Kia Sorento cup holder. You should print this in ABS or PETG, to handle the higher temperatures it might see in your car.
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
This only contains the G-Code for printing on a Prusa Mini/Mini+ Added true multi-colour to the model, so that the bottom portion with the text prints completely flat without debossed text and uses a separate colour for the text on the…
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant
Designed to fit inside of the 70mm tall x 27mm diameter pill bottles. The divider lets you keep a small supply of pills, with 7 day labeled compartments.
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
This only contains the gcode for doing a true multi-colour print on a Prusa Mini+ "0_0.2mm_PLA,PLA_MINI_1h30m.gcode" does a true multi-colour print for the first two layers. Start with the filament for the main body colour loaded. Then…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
Helps to bundle up excess lengths of backpack strap.
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
This g-code file is specific to a Prusa Mini/Mini+ If you are printing in Orange with Black text then you'll need to: Start with Orange filament loaded on your Prusa Mini/Mini+ About 8 minutes after starting your print from the g-code…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
Pikachu Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab so…
Mario Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab so that…
Winne the Pooh hugging a heart. Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Super Mario Brothers I've added a thicker more rigid V2 model for free-standing use/display. If you're placing Mario & Luigi on a wall, you might want to use the V1 model to save some filament. Tip: The tab on the bottom is designed for…
A splattered Wile-E Coyote
I've added one version with a inbuilt nut and another with knurling. The internal valve should be printed with 100% infill. The included .gcode files are configured to print the valve at 100% infill, while the outer body is set to 4 walls…
Spiderman on the wall Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of…
A Minecraft sign Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the…
Wile-E Coyote Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab…
Rick from Rick and Morty Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning…
For the Fortnite gamers. A small piece of Sticky Tack will help to keep this in place on either your desk or your bookshelf.
Two versions of the radius gauge with either short or long arms. 2025-02-15: Cleaned up/re-aligned the text on both gauges.
Kevin with a Valentine's Day heart Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
you can keep your cat attached with a small dab of Sticky Tack
Minnie can be held in place with a small dab of Sticky Tack
Please be aware, that these types of knives are prohibited in Canada. This is a minor remix of the trunnions which now include printed threads. There are 2 versions of the trunnions available. One set which looks similar to the originals,…
Deadpool Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab so…
Spiderman crouching Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of…
The Road Runner Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the…
Nyah, What's Up Doc? Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of…
Taz from Looney Tunes Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of…
The Grinch Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab so…
Here's a set of multi-clamps, which can be used for a wide variety of clamping scenarios. They're designed for use with some McMaster-Carr L-Hook Anchors (3/8"-16) or similar.
Tweety Bird Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab…
a Valentines Day heart from Snoopy Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
You can keep this stuck in place with a small dab of Sticky Tack
Darth Vader Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab…
I printed ours out of PLA and this is their third winter on our roof, after having been attached with a hotglue gun. When placed in sufficient quantities and strategically placed, they work well at keeping the pidgeons out of the little…
Fry from Futurama Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the…
2D artwork of Thumper from Bambi Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Eric Cartman from South Park Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
A shopping cart token which works on carts which take either Canadian Loonies or quarters.
Mickey peeking Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the…
Tigger from Winnie the Pooh Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Here's one of R2D2 I did a couple of years ago and forgot to post. Enjoy ;) Note: I've added a V2 of R2D2, as I'd just noticed that there was some detail on R2's head that didn't look like it was supported properly and might be prone to…
Bambi Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab so that…
Luigi Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab so that…
Eeyore from Winnie the Pooh Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Minecraft Evolution sign Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning…
Wile E Coyote holding an umbrella Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Lady and The Tramp Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of…
I left the sign empty, so that you could put a small paper or 3d print of your own in back or in the print. Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your…
Snoopy as Joe Cool Snoopy can be held down on your desk or bookshelf with a bit of Sticky Tack. 2025-03-27: I've re-oriented the model to match the orientation it should be printed in.
A foldable & adjustable cellphone stand which can be printed-in-place without supports. Folds down to 1cm A small update to my first version (added a fillet to the inside front edge).
Barney Gumble from The Simpsons Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Alice and the Mad Hatter having tea Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Medical symbol I understand that there is some controversy and differing opinions as to whether or not the Caduceus is a medical symbol, as opposed to the Rod of Asciepius. While the more common medical symbol seems to be the Rod of…
Tweety Bird sitting Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of…
Sponge Bob Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab so…
Homer Simpson Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab…
A Stormtrooper helmet Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of…
This fits Atlas Mason jars. Please ensure that your jar's threads have 4 thread starts, or this will not fit. Your success in this catching any any of the pesky little bugs is really dependent upon your bait. Personally, I never ever did…
Wile E Coyote Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab…
I've updated the ground shadow on this version of Piglet from Winnie the Pooh For wall mounting, I've included a version without a stand. Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft…
Sylvester the cat Another Sylvester model: https://www.printables.com/model/322501-sylvester-pouting Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork…
Sylvester the cat pouting Another Sylvester artwork: https://www.printables.com/model/320112-sylvester-the-cat Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your…
Daffy Duck Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab so…
Wall-E the robot Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the…
Bull Rider Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab so…
Another Minion Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the…
Sylvester the Cat and Tweety Bird Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Bite my shinny metal butt Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Mickey Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab so…
Yosemite Sam from Looney Tunes Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
The definition of power in '85 Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Now where's that wascally wabbit!? Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Kevin from Minions Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of…
This desk or bookshelf art can be held in place with a small dab of Sticky Tack.
Mario riding a dinosaur Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning…
Fire extinguisher model for dioramas or board games, etc. I've included some print sets for doing the Tank in a separate colour from the Hose & Handle.
Stewie from The Family Guy Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Flower from Bambi Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the…
A guide to help you drill 90 or 45 degree holes.
The Mandalorian Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the…
A handy travel sized toothpick case/dispenser. Note: The optional cap may be printed in Vase mode, using an extrusion width of 0.8mm 2023-07-09: Added another version with a combination image & text. 2023-07-10: Uploaded some optimized…
Here's a set of short and tall letter bricks which are compatible with Lego blocks. They can all be printed without supports. I recommend printing them directly onto a smooth print bed like glass, without using a raft (In my test prints,…
Scrooge McDuck Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the…
Buzz Lightyear Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the…
Speedy Gonzales 2023-08-13: Added a version without the Desk Stand Tab. Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest…
The wings can be printed with a filament colour change from black to orange after 0.8mm (total height of the wings is 1.6mm) Can be printed without supports.
Here's a set letter bricks which are compatible with Lego blocks. All of these can be printed without supports. I recommend printing them directly onto a smooth print bed like glass, without using a raft (In my test prints, the letter “A”…
Daffy Duck Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab so…
Inside diameter of the funnel's neck is approximately 50mm, while the top of the funnel is around 116mm dia.
a cafe sign As with all of my 2D artwork and signs, using a small blob of removable/reusable Sticky Tack will help to keep this stuck to your table/desk/shelf.
Here's a set of multi-clamps, which can be used for a wide variety of clamping scenarios. They're designed for use with some McMaster-Carr L-Hook Anchors (3/8"-16) or similar.
A cell phone stand with Snoopy doing a happy dance.
Andy Capp playing darts By special request, I've added a version which has been resized to 180mm X 180mm to fit a Prusa Mini+ build plate and provide some different heights for a three colour print. For the newly added model, the total…
