Counting matching models…
This is a rugged case for your Meshtastic TTGO T-Beam device with SMA antenna plug. I printed this using Overture PETG with 4 outer walls and 25% infil with the Prusament PETG settings. Use a dab of silicon grease on the switch cover for…
This is a bread lame that accepts standard DE razor blades. The blade clip locks into place to securely hold the blade during use and there is a knurled thumb ramp on the clip to help you manipulate the it while keeping your fingers away…
Topographical model of Taiwan, not to be confused with China. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: No Resolution: 0.2 Filament: Prusa PLA If you'd like you can buy me a coffee here:…
Remix of the high poly Bulbasaur. I divided up the .stl in Meshmixer so it will be compatible with the Prusa MMU2S and other multi material/multicolor setups. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports:…
Simple muzzle brake for nerf blasters. Print it in orange unless you like to live dangerously. If you'd like you can buy me a coffee here: https://www.buymeacoffee.com/junrenman
This replaces the back cap for all Nerf blaster that accept the standard Nerf stock with a 6 position Mil-Spec style AR buffer tube adapter. Will accept real carbine AR stocks and most airsoft knockoffs. If you'd like you can buy me a…
Roughly 1/4 cup scoop for dry cat food. If you'd like you can buy me a coffee here: https://www.buymeacoffee.com/junrenman
Simple ink shot for filling fountain pens with built in filling systems. Has a built in spout to make pouring ink back into the bottle easier and a wide base to help keep things stable while in use. If you'd like you can buy me a coffee…
This is a remix of the Companion Cube Upgrade for 3 colors. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: No If you'd like you can buy me a coffee here: https://www.buymeacoffee.com/junrenman
This is a cheek riser that clips onto the Magpul Zhukov folding stock for AK pattern rifles. It is designed to put your eye in line with a micro red dot optic mounted on an RS Regulate mount. It holds up just fine with light use but I…
Print flat side down. Fits standard full sized sticky notes. If you'd like you can buy me a coffee here: https://www.buymeacoffee.com/junrenman
This is a splint to immobilize and elbow at 90 degrees. The arm cups are 80mm in diameter and will accommodate a petite woman or child if the arm is swollen. Secure the brace to the upper arm and lower arm with ACE bandage or any…
YOU MUST PRINT THIS IN COLORFABB HT!!!! This is a pressure valve adapter for the AeroPress XL that uses replacement valves from the Fellow Prismo. In my opinion the XL version of the AeroPress is pretty lackluster without this attachment.…
This is a simple post card frame that can be mounted to the wall using flat thumb tacks or small finishing nails. It fits postcards that are about 179mm long by 118mm tall. There is a sacrificial base that is .3mm thick. Print with the…
These are foot ends for packable camp chairs. These feet will work on any chair in this style as long as the poles are 13mm in diameter. The rear legs are for 45 degree poles and the front legs are for 50 degree poles but these should be…
This is a simple belt holster for a Swingline or similarly dimensioned stapler. Fits the original made in America version of the stapler, the rubber feet on the new ones are too thick to fit. If you'd like you can buy me a coffee here:…
This is an SLA printable canopy for the BeeBrain stack by New Bee Drone. Print Settings Printer Brand: Formlabs Printer: Formlabs Form 2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.1 Category: R/C Vehicles If you'd like you can buy…
This adapter allows you to get every last drop of resin out of your cartridges. To use it let your cartridge sit at an angle to let all the left over resin flow to the top of the cartridge, then use a knife or saw to cut the lower corner…
This is the tightening wedge for the Magpul Zhukov-S stock. You will need to print this out of material capable of withstanding exposure to heat, lubricants, solvents, threadlocker, and the recessed nut hole must be able to withstand…
This is a generic solder tip holder. Print it out and use an appropriately sized drill bit to ream out the holes to true up the size. Hot glue it to the side of your solder station and never lose another solder tip. If you'd like you can…
If you have a modded Nerf Retaliator and want to install the leftover stock parts into an older Recon CS-6 you will need this spacer/spring guide. This spacer holds the smaller direct plunger Retaliator spring concentric with the plunger…
Combined in blender, not optimized for printing. Good luck. Category: Models If you'd like you can buy me a coffee here: https://www.buymeacoffee.com/junrenman
This replaces the suction cup hanger for the Ausdom Dash Cam. Use the original mounting hardware and high quality mounting tape to mount this to your windshield. The original suction cup does not stick well to the tinted area at the top…
The adapter will accept a mil spec AR-15 buffer tube so you can mount any AR stock on your talon claw. In my test print the threading gripped the tube very tightly so the castle nut was not necessary but if you print with more clearance…
This is a handle for turning broken 2mm drill bits into a 2mm punch. Very useful for modding Nerf blasters. If you'd like you can buy me a coffee here: https://www.buymeacoffee.com/junrenman
Small Parts organizer for desktop use. If you'd like you can buy me a coffee here: https://www.buymeacoffee.com/junrenman
These handles will make it much easier to use the YHM wrenches when you disassemble your can for cleaning. The fit is pretty tight so you may have to hammer them on. If you'd like you can buy me a coffee here:…
This a holster for 1.5oz cans of modern OC spray. I modeled it around the Fox Labs 1.5oz can but other cans with a similar style should work. The fit is a little on the loose side when printed on my printer but a few wraps of electrical…
This is a dust lid for large vacuum insulated tumblers. It should fit all the popular 30oz tumblers on the market, yeti, ozark, yukon, etc. The idea is to keep stuff from falling into your drink if you have it at your desk all day or…
This replaces the metal end cap spacer on a Crank Brothers Candy series pedal. The purpose of this part is to act as a washer for the cap screw and prevents the pedal body from sliding back and forth on the axle. Riding with this spacer…
Formlabs rigid resin is a very useful resin if you print parts with thin walls or need rigid parts. The problem is that parts printed in rigid resin are damn near impossible to remove from the build surface. This solves the problem by…
This is a MOLLE compatible clip for garage and gate openers. Hot glue it to your garage opener and attach it to MOLLE webbing on your backpack straps. Great for bike commuting. If you'd like you can buy me a coffee here:…
This device slips under the fire button of the Wismec Noisy Cricket mod and prevents the mod from firing unintentionally. A must have accessory for vapers who are not a fans of 3rd degree burns! Print Settings Printer Brand: SeeMeCNC…
These are arm-mounted skids for the rooster and chamelian TI frames. They snap onto the middle of the arm and are secured with electrical tape. If you'd like you can buy me a coffee here: https://www.buymeacoffee.com/junrenman
These are all currently available results.
