Counting matching models…
Printed fine for me with 0.6mm extrusion width on 0.4mm nozzle, 0.3mm layer height, 0% infill, and a few millimeters of brim, in black PLA. Holds fine using double-sided tape on the back. Make sure the space you measure for your hanger…
Articulated picam camera mount I created because I didn't like the stock one included with this printer (Kodak Portrait). For assembly there's some additional hardware required: 1 countersunk m4 screw, of any length, for mounting wherever…
Needed to somehow mark the ear protectors at the local hackerspace in an obvious way that wouldn't be irritating. Print two of noise-protector-cat-ears-3m-peltor-clip.step, one ear.stl, and one ear-mirrored.stl Printed fine in PET-G, but…
Two-part case for the CDC badge - https://github.com/riatlabs/cdc-badge/tree/main - that was available for purchase during 39C3. Requires some hardware: 2x M4 nuts 2x M4x15 countersunk screws 4x M2x15 countersunk screws - probably;…
The exported 3d model files (.step/.stl) are not very useful by themselves. This model is intended to be used as a basis for new remixes, by changing things in the CAD model (cute-cat-underconstrained.slvs). Have Fun!
Printed in generic PET-G with 0.2mm layer height and 0.1mm tolerances on a Prusa Core One L. If modifying/replicating this for your own designs, chamfers on the sides of middle/inner part help avoid binding up.
Needed to somehow mark the ear protectors at the local hackerspace in an obvious way that wouldn't be irritating. Print two of noise-protector-cat-ears-nep312-clip.step, one ear.stl, and one ear-mirrored.stl Printed fine in PET-G, but the…
Features fully 3d-printable, print-in-place, no supports Recommended print settings material: PETG layer height: 0.1mm nozzle size: 0.4mm slice gap closing radius : 0.05mm Guide Print smol-flip-off.step first, to see if the "coin" can be…
These are all currently available results.
