Counting matching models…
Since I couldn't find a really good fitting holder for my Bosch batteries, I drew a holder myself. If you have your slicer settings under control and use a calibrated printer, the Bosch batteries fit into the printed holder with a little…
Cap for silicone cartridges or simlar, with S15x2.5 thread.
The holder can be attached to a tool wall (screwed on) and holds the Mitutoyo Digital IP 67 caliper (500-706-20) or a simlar caliper. Perfect also as a addition to my caliper depth base attachment holder for the Mitutoyo Depth Base…
A detailed description of the project is available on my homepage (in german): https://100prznt.de/pool/skimmer-am-rechteck-frame-pool/ Print instructions For long durability and tightness of the wedge, it should definitely be printed…
The scope mounts allow you to quickly and easily find the proper height. The mounts fit on an 11 mm dovetail and fit scopes with a tube diameter of 1" (25.4 mm). Have now added the mounts in 30 mm as well. The heights correspond to those…
Since I couldn't find a really good fitting holder for my Bosch batteries, I drew a holder myself. If you have your slicer settings under control and use a calibrated printer, the Bosch batteries fit into the printed holder with a little…
Fits darts with a maximum barrel diameter of 10 mm. Holder is printed upright, support only on the print bed is sufficient.
I designed this enclosure for my project "Temp2IoT". It can be equipped with a WeMos D1 mini and provides cable outputs for a USB cable for power supply and another for a DS18B20 temperature sensor. After assembling the two parts of the…
The tray holds a total of 16 AA batteries, 16 AAA batteries and 4 CR2032 batteries. Print instructions The tray should be printed upside down to get a fine top side. Glue the bottom plate into the holder with some glue.
End caps for the MPCNC. To make the closed end caps for the frame aligned with the corners, the X and Y sliede-rails must be 4mm (2mm per cap) shorter each. Fits for 25x2mm tubes. Print instructions Print in PETG or ASA
To get a good circular flow in the round pool, it is helpful if the water flows into the pool sideways. With the angle insert this is possible without further modifications. Fits only for original Intex 38 mm inlet nozzles.…
With this mount a 120 fan can be easily installed on the Open-CNC-Shield by Timo Altholtmann. Spacer bolts are needed to get a proper distance. A detailed assembly instruction and a parts list is also available on my homepage (German):…
With this holder a 40 mm pool suction hose can be attached to the pool wall. The bracket is optimized for the profile of the oval Intex pipes (Prism Frame, Ultra Frame, Rondo, etc.) 2 cylinder head screws M3x25 are required for mounting.
A mount that allows the Philips Hue MotionSensor to be installed in a corner.
With this tool mount a spindle with 80 mm outer diameter (min. 165 mm high) can be installed on the MPCNC. I use this mount with a 2.2 kW chinese spindle. The mount is designed for the new "Primo" version (F 25.0 mm) and is screwed…
The Organizer contains three trays, which are mounted on a ground plate (I glued them on). Since the cutouts are very specific to my requirements, here is a detailed list of my equipment. First tray (low) some foam for putting in needles…
Very basic and minimalist enclosure to house the WeMos D1 mini and the matching relay shield. Beside the breakthrough for USB, reset and relay contacts a cable outlet is provided, e.g. for a DS18B20 temperature sensor.
Inspired by the Drybox humidity sensor mount by RobMagus (link is under original model) I created a mount which is better fitting for metric nuts and bolts. The mount holds a cheap LCD temperature / humidity sensor and can be attached to…
This wall holder offers mounting space for workshop files from the producer Pferd. Several holders can be connected with the connector. The hooks provide a good fit for the current Pferd Workshop Files .
Holder for PB Swiss screwdriver with SwissGrip handle.
The holder can be fixed to a wall with two screws. The dimensions are optimized for whiteboard markers from the manufacturer Staedler (18 mm diameter). Instructions for printing For a better print quality, you can print the holder…
The original holder for the Philips Hue dimmer switch is not bad in and of itself, it also makes a noble impression on the wall. But if you glue the holder on a flat tabletop, for example on the bedside table, it doesn't look so nice…
Mounting clip for the Philips Hue Lightstrip V4 or other LED strips with 15 mm width.
The end caps can be attached to square tube with dimensions 30 x 30 x 3 mm (edge radius 5.5 mm). Versions I have drawn two versions, one with a flat end and one with a pocket for inserting a slider pad (diameter 26 mm). without pocket:…
This heavy duty motor coupler allow the installation of large NEMA 17 motors on the z-axis. I use the 17HS26-2304S motor from Stepperonline. Fits for the "Primo" version (F 25.0 mm) of MPCNC. No other parts need to be replaced. The…
I use this very simple lamp base with Philips Hue GU10 bulbs. The shape of the GU10Cube allows it to be positioned in different ways, so the light beam can be aligned horizontally, vertically or at an angle of 15°. This makes it easy to…
The two parts "0-tip" and parallel attachment can be placed on a folding rule and make it easy to measure the required lengths for a lock cylinder.
This cable outlet can be installed in a panel (e.g. desktop). After passing through cables with plugs, the opening can be closed with a cover plate. Depending on the number of cables to be passed through, there are different covers (3 -…
This end cap is used to close a flat tube (type: Comfotube flat 51 from zehnder ), which can thus be used as a multimedia in wall duct. The end cap also offers the option to connect 2 pieces of M25 protection tubes. Found more details on…
This cover makes it possible to place the Tukkari case very close to a wall and still be able to use the ventilation. The cover is designed for the use of an inside mounted fan. The profile of the air deflector as well as the spacers is…
Selfmade lamp from a Tiki cup. An E14 lamp socket is mounted in the cover, after which it can be put on a Tiki cup. I used the following parts: Tiki cup https://amzn.to/3w40TOP E14 socket: https://amzn.to/3gdHYW0 Philips Hue E14 color:…
With my housing I would like to relieve not only the connection pieces mechanically, but also immediately pick up a few more features, which I do not like so much. This would be the missing electrical connection and a on / off switch and…
With this holder a simple LED profile can be mounted simply and inconspicuously in the Tukkari TLX enclosure. The cable is passed out the bottom of the holder and can be routed along the edge in the TLX enclosure. Material I use a black…
This endcap for 25x40x1.5 mm square tube has a 12 mm hole for mounting a adjustable foot. Note The hole has a diameter of 12 mm. To hold the force of the foot, an adequate nut (M12) and a washer must be mounted under the end cap. Print…
This terminal allows the installation of a compressed air coupling in a parapet channel from OBO Bettermann. Print instructions BOM 4x Headscrew M5x20 4x Washers 5.3 4x Nut M5 3x Headscrew M4x12 3x Nut M4 1x RIEGLER DW 267 (Deckenwinkel…
A second model includes a version with integrated support. The support cone can be broken out after printing. The upper cone, which remains in the part, does not interfere with the assembly. I would recommend to print the parts from ASA.…
A matching filament spool holder belongs to the noble Tukkari case. However, the 1 kg Tukkari holder has a definite disadvantage in my eyes. The very thin shaft is not on bearings, so it happens quickly that the spool shakes when it is…
The holder fits a strap with a width of 17 mm.
Replacement rim for a little compressor from German manufacturer Güde. The original tyre can be mounted on the rim, exact dimensions see sketch. Print instructions Print with >50% infill.
To prevent lime and other particles from being flushed out of a dosing float and into the pool, a filter mat can be inserted. To prevent it from slipping in the float, it can be fixed with this Filterholder . I use a filter mat, which is…
This holder prevents the Stahlwerk TIG200 welding unit from slipping. For this purpose, the holder can be screwed onto a plate. I use this holder for a STAHLWERK AC/DC WIG 200 ST IGBT Puls, it should also fit for similar devices.
Clamping block for the Rothenberger ROCUT 110 for fixing PVC, PE, PP, PEX, PB, and PVDF pipes with a diameter of 63 mm. Like original part no. 55023. The blocks can be mounted to the ROCUT 110 device with an M8 bolt (M8 x 30) and an M8…
The holder can be attached to a tool wall (screwed on) and holds the Mitutoyo Depth Base Attachment (050084-10). Perfect also as a addition to my caliper holder for the Mitutoyo Digital IP 67 Caliper (500-706-20) Caliper Holder Print…
These are all currently available results.
