Counting matching models…
A happy pen holder wearing sneakers. Easy print; no supports required. Height: 110mm (4.3 inches) Inner diameter of the top: 72mm (2.8 inches) *Enjoy and if you print one please post a make!*
This dragon head requires support, but I have taken the steps to make the slicing setup extremely easy for you. I included the “.3mf” file you can load in PrusaSlicer; it has my painted on supports and a few modifiers to make the infill…
The Velociraptor Head is a little more complex to print than many of my other animal heads because the teeth require support. You will probably also want support for the back of the jaw, but this model printed fine for me without support…
The Allosaurus Head is a little more complex to print than many of my other animal heads because the teeth on the upper jaw require support. You may also want supports for the chin and above the eyes. For similar models see my Collection…
This is a Porsche 911 GT2 (Type 993) slot car body. It is designed to be used on the "Scalextric Super Resistant Team GT Lightning" car chassis. Those cars are widely available for around $25. Approximate scale = 1:32. Much of the credit…
One minute introductory video for my Bracket for Wall Mountings: All four sides are tapered so it is easy to slip things on and off. There are holes for two screws/nails, but only using the top one will work unless hanging something that…
I printed this T-Rex head with support for the back of the jaw and the upper teeth. The model printed fine for me without support going all the way up to the chin. For similar models see my Collection of Animal Heads/Busts that I have…
This Lion Head is a fairly straight forward print. You only need supports for the teeth and behind the ears. For similar models see my Collection of Animal Heads/Busts that I have designed or remixed. All of these designs use the same…
This Shark Head is an easy print. It can likely be printed without support; at most a few teeth will require supports. It is a single material print (it has been painted in the cover photo). For similar models see my Collection of Animal…
The Bull Head is a fairly easy to print with only the ears and horns requiring support. For similar models see my Collection of Animal Heads/Busts that I have designed or remixed. All of these designs use the same bracket to mount, making…
This Darth Vader Bust is very easy to print and does not require any support material. I have included a “3MF” file with optimized lightning infill to make this easy to print and minimize the filament needed. I also included “.gcode”…
The Triceratops Head should be a fairly easy print requiring only minimal supports. For similar models see my Collection of Animal Heads/Busts that I have designed or remixed. All of these designs use the same bracket to mount, making…
This a T-bar style jewelry display stand for a single pair of earrings. It can be used at home or to display earrings that are for sale. The stand is four inches high and two inches wide. Printing Very simple to print. No supports, raft…
— Link to my other design: Half Rim Sunglasses — Features: Designed to use Oakley Gascan lenses Printed to lens & face curvature, no need for inexact heated frame bending Print in place hinges make for simple one piece print with no frame…
The Turtle Head should be one of the easiest prints of my wall mounted animal heads. If someone posts a good picture of a make of this turtle I would like to use it is the cover photo for this model and give you credit for it (with your…
This Stormtrooper Helmet can be printed with minimal support. I have included a “3MF” file with the supports necessary already painted on to make this easy to print. I also included “.gcode” files for the Prusa MK3/S/S+; if you have one…
The Labrador Retriever Head should be one of the easiest prints of my wall mounted animal heads. For similar models see my Collection of Animal Heads/Busts that I have designed or remixed. All of these designs use the same bracket to…
This Deadpool bust can be printed without support, but I included a few tree supports in the attached “3MF” file in locations that may benefit from a small amount of support. I also included a “.gcode” file for the Prusa MK3/S/S+; if you…
This a T-bar style jewelry display for bracelets. It can be used at home or to display bracelets that are for sale. The bar is one inch in diameter, eight inches wide and is four inches above the base. The base is six inches by two and a…
This a jewelry display stand for up to eight pairs of earrings. It can be used at home or to display earrings that are for sale. Printing Very simple to print. No supports, raft or brim required. The body piece has a flat side that should…
This marble run piece will split marbles entering it into two different paths. Multiple of these diverters can be connected to send marbles onto as many different paths as you want! This should work with almost any marble run set (ours…
This model of a Bulldog will require some support around the back of the head. The supports should be fairly short, with the support for the jowls being the tallest I used. For similar models see my Collection of Animal Heads/Busts that I…
I've designed this Rhino Bust so it can print with or without eyes (so the eyes could be printed separately in a different color). I've also done it with and without built in supports. This means there are four models to give you all…
My son loved the Balloon Boat designed by K-eye, but I wanted to make it faster and more stable. This lead to the idea to modify it into a Catamaran. Two hulls leads to increased stability and two balloons means twice the power! This can…
This a weighted poker card capper. It is placed on your hole cards during a hand to make sure they are not accidentally folded. The base is designed with the same diameter (39mm) as a standard size poker chip so this will stack perfectly…
This a T-bar style jewelry display for necklaces. It can be used at home or to display necklaces that are for sale. The bar is two inches in diameter, eight inches wide and the top of the bar is twelve inches above the base. The base is…
I designed this so I could mount the MakerBot designed T-Rex Skull on my son's bedroom wall. The skull slides onto this wall mount just like it would on the base in the MakerBot design, so if you have already printed the skull there is no…
These two Rhinoceros Heads should be simple to print. Rhino #1 is the Greater One-Horned Rhinoceros and rhino #2 is either the Black Rhino or White Rhino. For similar models see my Collection of Animal Heads/Busts that I have designed or…
— Link to my other design: Full Rim Sunglasses — Features: Designed to use Oakley Gascan lenses Printed to lens & face curvature, no need for inexact heated frame bending Print in place hinges make for simple one piece print with no frame…
There are two versions of this model: Porsche_356_Speedster_Body_Shell = Just the body of the 356 Speedster Porsche_356_Speedster_Slot_Car_Body = The body plus internal reinforcements and chassis mounting provisions Approximate scale =…
These boxes are for displaying jewelry. The boxes are 2, 3, 4 and 5 inches tall. The dimensions of the top of the smallest box are 3.5" x 3.5". Each subsequent box is just slightly larger so the previous box can be slid inside of it so…
The Sheep Head should be a fairly easy print compared to many of my other animal heads with just the ears requiring support. For similar models see my Collection of Animal Heads/Busts that I have designed or remixed. All of these designs…
This horse head is very easy to print and does not require any support material. I have included a “3MF” file with optimized lightning infill to make this easy to print and minimize the filament required. I also included a “.gcode” file…
The Edmontosaurus Head is an easy print that does not require supports. For similar models see my Collection of Animal Heads/Busts that I have designed or remixed. All of these designs use the same bracket to mount, making them…
This a weighted poker card capper. It is placed on your hole cards during a hand to make sure they are not accidentally folded. The base is designed with the same diameter (39mm) as a standard size poker chip so this will stack perfectly…
This Yoda bust is very easy to print; the huge 3 piece version should print without support. The one piece version will just need support behind the ears. Size Options: Big: One piece. Filename is “Yoda (1 Piece)_Head-For-Wall”. Huge:…
These LA Lakers coasters are 3.75 inches in diameter. These coasters are designed to be printed with a single extruder printer. The first color (the color of the logos) is 2.4mm thick, so set your print to pause just after that and change…
This a weighted poker card capper. It is placed on your hole cards during a hand to make sure they are not accidentally folded. The base is designed with the same diameter (39mm) as a standard size poker chip so this will stack perfectly…
This Spider-Man bust might be able to be printed without support, but it might not hurt to support the back of the head just above the print bed. If you scroll through the pictures, one of them shows the model and details where I painted…
Bracket attaches to wall with one screw or nail and holds four badminton rackets and birdies (shuttlecocks). No supports required.
This a weighted poker card capper. It is placed on your hole cards during a hand to make sure they are not accidentally folded. The base is designed with the same diameter (39mm) as a standard size poker chip so this will stack perfectly…
This a weighted poker card capper. It is placed on your hole cards during a hand to make sure they are not accidentally folded. The base is designed with the same diameter (39mm) as a standard size poker chip so this will stack perfectly…
I've designed a pickup truck body for slot car racing. The model has separate files for headlights and a spoiler, so they can be printed in a contrasting color. Both the headlights and spoiler push into specially designed holes in the…
I got tired of having to hold a book and my phone (for the flashlight) when reading to my son at bedtime, so I designed and printed this to set my phone in. All important dimensions are shown in the drawings in the pictures. This is…
Three different geometric vase designs, that are very simple to print (no supports necessary). All three vases have a square profile at the top and bottom and a cross shape halfway up. The designs vary on how these three profiles…
This a weighted poker card capper. It is placed on your hole cards during a hand to make sure they are not accidentally folded. The base is designed with the same diameter (39mm) as a standard size poker chip so this will stack perfectly…
This a weighted poker card capper. It is placed on your hole cards during a hand to make sure they are not accidentally folded. The base is designed with the same diameter (39mm) as a standard size poker chip so this will stack perfectly…
This a weighted poker card capper. It is placed on your hole cards during a hand to make sure they are not accidentally folded. The base is designed with the same diameter (39mm) as a standard size poker chip so this will stack perfectly…
This a weighted poker card capper. It is placed on your hole cards during a hand to make sure they are not accidentally folded. This design is from a scan of a Resting Mexican sculpture. If you like this model please checkout my…
This is a 6" x 6" x 1.75" display stand. It is intended for jewelry but could be used for almost anything that will fit on it. It has a thin top to save material and show the diagonal supports (in certain materials/colors) which gives it…
Three different geometric vase designs, that are very simple to print (no supports necessary). Vase #1 - An ellipse twisted 240 degrees up a helix. Vase #2 - Top and bottom profiles are ellipses offset by 45 degrees with a circular…
This pen holder is a very easy print; no supports required. There are four configurations available: Intimidating Pen Holder_Arms & Legs: As shown in the pictures Intimidating Pen Holder_No Legs: Face & arms only Intimidating Pen…
This a weighted poker card capper. It is placed on your hole cards during a hand to make sure they are not accidentally folded. The base is designed with the same diameter (39mm) as a standard size poker chip so this will stack perfectly…
This a weighted poker card capper. It is placed on your hole cards during a hand to make sure they are not accidentally folded. The bottom of the basket is designed with the same diameter (39mm) as a standard size poker chip so this will…
This a weighted poker card capper. It is placed on your hole cards during a hand to make sure they are not accidentally folded. The base is designed with the same diameter (39mm) as a standard size poker chip so this will stack perfectly…
I wanted something I could put my baby monitor on to aim it down from a shelf above where my toddler couldn't reach it. I also didn't want to mount it to a wall and have to repair the holes that would leave. This was my solution. The…
Flat portion of the aggressive eyes is one millimeter thick, so I recommend changing filament colors at 1.05 mm or 1.1 mm height. Eyes are designed to use standard Vorpal Hexapod magnet. There is also a tiny cutout in the top of the nose…
This dragon head requires support, but I have taken the steps to make the slicing setup extremely easy for you. I included the “.3mf” file you can load in PrusaSlicer; it has my painted on supports and optimized lightning infill to make…
This a weighted poker card capper of a topographical map of Montana. It is placed on your hole cards during a hand to make sure they are not accidentally folded. If you like this model please checkout my Collection of Card Cappers Designs…
There are three bank versions available: Spending Saving College Savings Choose the body & text that go together and print a top. Print the PDF and cut the ledgers apart and put them in the slot on the back of the bank. Great for teaching…
This Captain America bust should be supported in a few small areas such as the back of the ears. If you scroll through the pictures, one of them shows the model and details where I painted on supports. I have included a “3MF” file with…
I wanted to design a mohawk for my Vorpal Hexapod. I decided that it would look better if the top of the cap was round, so I started by modifying the cap. Initially I designed the short mohawk then I decided to design a taller mohawk as…
This a weighted poker card capper. It is placed on your hole cards during a hand to make sure they are not accidentally folded. The base is an ellipse designed so that the minor diameter is the same diameter (39mm) as a standard size…
These are all currently available results.
