Counting matching models…
For storing and organizing/reorganizing very small hardware, example m2 thru m6 nuts screws washers from sets. Great if you are constantly adding new sizes and types because the double or 5x boxes are a hassle to reorganize if you add one…
Can grab from about 20mm to 37mm diameter, 10mm more range than the original model. Uses the same stock gear. The gear gets clipped in place before the Broom Holder is mounted on a wall. Once mounted the gear is completely captive. No…
Load the .3mf in Bambu Studio. Set flushing volumes to 800 both ways. Set flow for the interface material at 105% I used PETG and PLA Plus Note the modifier layer on either side of the "support" layers, this is to force the creation of…
MGN9 Linear Rail ever so slightly sits in the v-slot of 20mm v-slot extrusions due to the chamfers. Common t-nuts can't clamp down on a 20mm v-slot rail enough and as a result the rail is not held 100% secure. Aditionally the chamfer on…
Wings are now more than one layer thick, more durable. BEND THE TAIL TIPS UP AND ADJUST THE ELEVATORS.
Just grab and go with your fingertip, 6u high, fits in most toolbox drawers. Other similar models available aren't easy to grab, and can fit too snugly. Stackable. Fits the 3x common wiha precision (maybe also picofinish?) lengths. More…
Intended for .2 layer heights, .6 extrusion width. Can be printed from any non-elastomer material but ABS, ASA, or Tough PLA would be preferred. No supports required. Inspired by…
Print in place but it does require supports to be generated at the bucket hook. I have included a .3mf for Orca Slicer 2.0 that I used to print the model with a Bambu X1C. I suggest 3 walls and 20% infill or greater for sufficient layer…
For organizing drill bits, taps, endmills. More sizes and variations to follow, please provide ideas and feedback. The single base is good for bits up to 40mm dia. The double base is suitable for bits up to 9mm dia. Non-Stacking No Magnet…
This solid gear lets you use only infill instead of requiring walls for the inside of the hollow gear, this is lighter and faster to print (confirmed with slicer) Or you can print it 100% infill for a more engaging experience.
A general purpose wire hanger, 4.4mm slot width. No special instructions, already oriented for best orientation. Maybe do 3 walls and 25% infill for sufficient strength but not really needed. I suppose you could split this in the slicer…
The original design could accommodate a slightly modified anti-backlash nut but in the wrong orientation (wrong orientation has the spring supporting the weight of the gantry). This is simply mirrors that part for the correct orientation…
I designed these to mount some EMT under a bench to keep the cats out but retain airflow for the vents. Since I made them I should share them too. Some versions should be printed with tree supports.
I figured somebody would eventually design this, why not me? Roughly based on a standard Gridfinity 1x1x6u bin. No base-grid required.…
This is the base design I have modeled for iterating its design, to be expanded in size in the future. Print in 95A TPU or similar not supports best for one-ended bits with a long shank I printed on an x1c with .4 nozzle, .6 wall width,…
The stock mount that comes on a Smallrig CVG2320 is too big for the GoPro Light Mod and off-center for some reason. This fixes those two issues. Simple to print, basic settings should work fine. Uses the screws that came with the cage:…
Check out the .3mf file for my preferred settings, especially for supports. Best to be printed in a material that doesn't creep, ABS is a good option. The supports can be removed by pushing an exacto knife in from the end on each side of…
Print upside down with a high infill density and high wall count, I used PETG 80% infill density and 6 walls, 6 top and bottom layers. Requires no supports. May fit other quick change tool posts with a nut measuring 0.857 inches or…
Ratchet Peg Replacement Missing Post Mail Box Print in nearly any material however you want, it will probably work.
These are all currently available results.
