P
PrintablesTBatt
Remote Control Caddy
Works great to help manage all of the remotes. I also included some spacers so that the remotes are all at different levels. Enjoy!
- Downloads
- 225
- Likes
- 20
- Rating
- 5
All models
Counting matching models…
P
PrintablesTBatt
Lathe Spacer
These work well for making multiple parts and for squaring up stock. Use 6mm magnets to hold them in place on the chuck. I used super glue to attach the magnets.
- Downloads
- 169
- Likes
- 36
- Rating
- 5
P
PrintablesTBatt
Alabama Coaster
Alabama drink coaster. Print the top upside down starting with WHITE then change color to DEEP RED (CRIMSON). I used PLA @ .2mm/layer with build plate supports. Roll Tide!
- Downloads
- 114
- Likes
- 8
- Rating
- 0
P
PrintablesTBatt
Gotcha Box
Use a rubber band to hold the sides in place while loading the marbles. Place the top onto the sides and carefully remove the rubber band. You can now pick the Gotcha' Box up by the sides and carry it. Place it on a table and put some…
- Downloads
- 105
- Likes
- 56
- Rating
- 5
P
PrintablesTBatt
Trail Camera Rain Hood
A friend of a friend asked if I could design and print a rain shield for his trail cameras. This was my second 3D scanning project and it came out very nice. Printed in PETG at 100% infill. He says it works great!
- Downloads
- 104
- Likes
- 4
- Rating
- 0
P
PrintablesTBatt
Air Pressure Regulator Mount
My air pressure regulator came without a mount so I designed this. Use PETG @ 100% fill.
- Downloads
- 103
- Likes
- 9
- Rating
- 0
P
PrintablesTBatt
Portable Band Saw Bench Mount
Print with PETG @ 100% fill for the stand. Works well.
- Downloads
- 89
- Likes
- 7
- Rating
- 0
P
PrintablesTBatt
Stand Mod for Endeavour Shuttle w/Booster Pack
After going printing crazy with the the Space Shuttle and then the Booster Pack I wanted a way to display the whole model. This is a new upright part of the stand along with a cradle for the external tank. This fits the original stand…
- Downloads
- 88
- Likes
- 16
- Rating
- 5
P
PrintablesTBatt
Small Paint Stirrers
Designed these to stir acrylic paint jars. Use a drill at slow speed.
- Downloads
- 73
- Likes
- 7
- Rating
- 0
P
PrintablesTBatt
Auburn Drink Coaster
Two part drink coaster. Print the top upside down in ORANGE then do a color change to DARK BLUE. Use build plate only supports. PLA @ .2mm/layer Warning: Cleanup is a real pain for some reason. Getting all of the support cleaned up will…
- Downloads
- 67
- Likes
- 8
- Rating
- 0
P
PrintablesTBatt
Elegoo Saturn 4 Ultra 16K Drip Tower
I had designed one of these for my Peopoly SLA printer and it works great so I designed one for my new Elegoo Saturn 4 Ultra 16K. It just stacks together. You can glue it together if you like but I made it so that the tongue and groove…
- Downloads
- 66
- Likes
- 6
- Rating
- 0
P
PrintablesTBatt
Flag Pole Mount
Print with PETG @ 100% fill. This mount has held up for four years now!
- Downloads
- 62
- Likes
- 19
- Rating
- 0
P
PrintablesTBatt
Moza Steering Wheel Mount
Designed to mount the Moza R12 steering wheel mount to the H3 DOF Reality motion platform. Two different versions are included depending on the tilt angle you like. I upgraded from a Thrustmaster TC300 which worked very well but the Moza…
- Downloads
- 61
- Likes
- 7
- Rating
- 0
P
PrintablesTBatt
GBU-69 Small Glide Munition
Printed in silver PLA. Wing rotates, just like the real thing (use a 3mm screw).
- Downloads
- 56
- Likes
- 10
- Rating
- 0
P
PrintablesTBatt
Coffee Filter Clamp
Our coffee maker would occasionally have the filter fold over and then the coffee grounds would get into the brew making it very bitter and having grounds in it. This cures that from happening. Print with ABS or ASA @ 100% fill. You may…
- Downloads
- 40
- Likes
- 4
- Rating
- 0
P
PrintablesTBatt
Sim Racing Seatbelt Tensioner
This project is going to get an option to work with the Moza pedals. I need to get some testing done before I will have this done. Hopefully it will be just a software change. This is NOT a simple project! If you are not electronically…
- Downloads
- 38
- Likes
- 8
- Rating
- 0
P
PrintablesTBatt
GTR Drink Coaster
I needed a drink coaster for my GTR. This is a three color print using Prusa Slicer color change tool. Print the base in a solid color (I used SILVER) and then print the top face down on the build plate. Use supports “build plate only”.…
- Downloads
- 37
- Likes
- 7
- Rating
- 0
P
PrintablesTBatt
Scrubber Drain
This holds a stainless steel scrubber for cleaning pans. Position it so the drain hole empties into the sink. The base has a slight bevel to it to help the draining. After using this for a while my wife said it needs to be larger so I…
- Downloads
- 32
- Likes
- 6
- Rating
- 0
P
PrintablesTBatt
Dynamite Tool Holder
Simple holder for the Dynamite brand tools. Once printed you can use a permanent marker for the labels or make it a two color print.
- Downloads
- 27
- Likes
- 1
- Rating
- 0
P
PrintablesTBatt
Work Sharp Idler Wheel
Print with TPU at 100% infill. I used a small bench vise to install it. It is a interference fit to the bearing.
- Downloads
- 26
- Likes
- 2
- Rating
- 0
P
PrintablesTBatt
Sim Racing Remote Fan Mounts
I had a set of the original Sim Racing Studio fans and loved them except the way they were mounted. They use a GoPro type mount and the fans were just to much mass for the mounts. Later on SRS designed a remote fan mount that used a 76mm…
- Downloads
- 26
- Likes
- 8
- Rating
- 0
P
PrintablesTBatt
Candy Corn Mouth
Uses regular candy corn for teeth. Make a bunch because everyone will want one. Uses 3mm fasteners. PLA
- Downloads
- 19
- Likes
- 14
- Rating
- 5
P
PrintablesTBatt
Soldering Iron Stand
I designed this several years ago and found it works with my soldering irons that I use. Super simple. PLA .2 layers infill 25%
- Downloads
- 19
- Likes
- 2
- Rating
- 4
P
PrintablesTBatt
FilterFunnel for used resin
I use this to filter out debris from resin before I put it back in the bottle. I have never had any issue with returning used resin back to the bottle. It prints just fine as long as it is pure resin. A standard funnel doesn't work well…
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesTBatt
Lathe Cut Off Tool Holder
I needed to make some alignment pins for a project and needed a way to cut 4mm rod to 10mm long pins so I came up with this AXA mount for my high speed tool. I used brass inserts for the clamp (3mm). The holes are too small but that way…
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
PrintablesTBatt
HAM Radio Tower
This was printed on my Prusa XL so it is quite large. Fill free to scale it down. HARC (Huntsville Amature Radio Club), of which I'm a member of (KM4TSV), asked me to make this. It applies to any HAM radio club and could be scaled down to…
- Downloads
- 16
- Likes
- 2
- Rating
- 3
P
PrintablesTBatt
AKASO EK7000 Lens Cap
Protects the lens when the camera is not being used. The tab on is used to eject the micro SD card. Printed with 95 TPU .2mm layers 100% infill. This camera is great for the money. Available on Amazon of course....
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesTBatt
Cable Inserter
It took me three tries before this tool worked as I had planned. This tool allows you to push a 3mm cable into a cars weather stripping. I used this to hide the dashcam power cable. It worked like a champ. Insert the blade portion of the…
- Downloads
- 13
- Likes
- 2
- Rating
- 0
P
PrintablesTBatt
Fuel filler mount
I used this to mount a fuel filler to the firewall of my RC airplane. There was nowhere else to mount it except on the firewall. Print with PLA @ 100% fill.
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
PrintablesTBatt
Sig Trailside Magazine Loader
I love my Sig Trailside 22 pistol but loading the magazine was not a pleasant experience! The tiny little “nubs” that retract the magazine were hard to grab and were kind of painful when you did. So, I designed this tool to cure the…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesTBatt
Parchment Paper Under Counter Holder
We mounted our parchment paper box next to our microwave. Handy! I used #2 servo screws to mount it. Note that the end with the slots in it does not need the screws to be removed. The blue that you see is the box opening which tore when…
- Downloads
- 10
- Likes
- 3
- Rating
- 0
P
PrintablesTBatt
Filament "Birdcage" Preventer
You probably have experienced filament rolls that seem to explode off of the spool. This results in what is often referred to as “birdcaging”. The filament looks like you were trying to make a birdcage. One way to possibly fix the problem…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesTBatt
IPA Bottle Holder
Simple IPA magnetic bottle holder. Printed in PRUSA PETG. The magnets are 60x10x3mm Two each. The bottles are these https://www.amazon.com/dp/B07V45VQG1?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_8
- Downloads
- 8
- Likes
- 0
- Rating
- 5
P
PrintablesTBatt
AXA Tool Post Dial Indicator Mount
I saw one of these for an OXA quick change tool post but it doesn't work with the tool post that I have. This dial indicator mount is for the AXA tool post that Little Machine Shop sells. It doesn't say AXA but has the numbers 250-100 or…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesTBatt
Rifton | Mobile Stander Brake Lever
Designed to be a replacement for broken brake levers. This part can be used for the left or right side. The original is prone to breaking. This model should be printed using ASA at 50% infill with 4 shell walls.
- Downloads
- 6
- Likes
- 1
- Rating
- 0
P
PrintablesTBatt
Cosmic Wind EP ARF Hatch
This was my introduction to 3D scanning. It is harder than you think! This is not a perfect scan by any means but it gets the job done. One of my RC flying buddies had the front hatch cover come off of his Cosmic Wind while in flight. We…
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
PrintablesTBatt
Tire nub remover
I just bought a new set of tires for my 2019 Nissan GT-R. They looked like they needed a shave with all of the nubs (hairs) sticking out. The last time I did this was real pain using flush cut wire cutters. This tool makes the job way…
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
PrintablesTBatt
World Models 1/4 Scale Hall Cherokee Cockpit
This has been in the works for quite a while. It at least has a seat and stick where the original was just a flat piece of wood for the cockpit. Make sure you at least print it with PETG. The clear canopy will cook the cockpit! The other…
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
PrintablesTBatt
USS-DryBox PTFE Improvement
After installing the drybox system on my INDX Coreone the PTFE tubes kept coming out of the filament sensor block. I looked at several ways to improve the tube capture and came up with this. The orange part (clamp) is printed in PETG and…
- Downloads
- 1
- Likes
- 3
- Rating
- 0
These are all currently available results.