Counting matching models…
Motivation My son is a fan of One Piece , and having most of the published volumes, I decided to design a bookmark for him. The design goals was to have a slim as possible leg that can be inserted in the book, and having the Straw Hat…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
Introduction This model combines 3 hobbies I have: Photography - allows me to take photos. Hot Peppers - Allows me to take photos of beautiful hot peppers I grow in my garden. 3D modeling and printing - Have the joy to create stuff that…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
1.- Introduction: In the 80s I was exposed to this puzzle formed out of wood, that with the years it got broken. (wood that got deteriorated and a friend that tried to solve it broke two of the pieces of it) Today you can find this wooden…
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant
Motivation I grow hot peppers as a hobby which also include saving seeds for the next season or for giving away to any one that likes to grow hot peppers. For preparing the give away small zip-lock bags with a tag and around 10-20 seeds,…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Intro I was looking for a flexi-cat for giving it as a present to a cat lover, and I could not find a single-color one, so I took the Mult-color Flexi Cat by K7ZPj and adapted it to be printed using my Prusa Mini+. The original author is…
Motivation During the local holidays, my wife wanted to create a macramé and hang it, but all hardware stores were closed, therefore the Prusa Mini+ came to rescue me by allowing me to print the hook and accessory rings. I searched in…
1.- Introduction This puzzle was introduced by Henry Ernest Dudeney . Some of his most famous innovations were in solving the Haberdasher's Puzzle that says: Cut an equilateral triangle into four pieces that can be rearranged to make a…
1.- Motivation As with all prints I do, all start or from a need or a lust-to-have. As an additional hobby that I have is to grow hot peppers, and at the beginning of each season, I grow new seedlings from new varieties, therefore there…
This USB Type A Male connector cable protector comes to solve the common problem we have with the use of the cable that tends to torn next to the connector. I could not find one that suits my needs, therefore using thinkercad I manaded to…
I grow hot peppers, and when the seedlings go out from the propagator, they sometimes need some support, therefore this was the motivation to create ones. I can get for a cheap price bamboo sticks from various diameters (3.38mm, 4.00mm,…
1.- Introduction This puzzle was introduced by David A. Klarner in the early 70s. The legend says that he gave a Christmas quest to students when he was visiting professor at Utrecht University. His quest consisted in writing a computer…
One of my hobbies is also carpentry, and while designing a real world companion table for our kitchen, this time I decided to create also a scaled down 3D model to see how it looks, and the result was so cute that I decided to share it.…
1.- Introduction As with all prints I do, all start or from a need, a fix or a lust-to-have. This model was designed as a fix for a broken heel in a sky boot from a good friend, that got deteriorated due to age and use. 2.- Design Process…
1.- Introduction: In the 80s I was exposed to this puzzle formed out of wood, that with the years it got broken. (wood that got deteriorated and a friend that tried to solve it broke two of the pieces of it) Today you can find this wooden…
1.- Introduction: In the garden I have a light chain (Light bulbs Guirlanda). In the far past, the bulbs were regular Incandescent light bulbs which were waterproof sailed. In these days, they were replaced by regular led bulbs which are…
The Idea More than a decade ago I got a wooden star puzzle that was forgotten for years (Source unknown), so I decided to model it in Fusion 360, a software I'm learning for my 3D printer Maker adventure. I took a caliper, measured the…
1.- Introduction As with all prints I do, all start or from a need, a fix or a lust-to-have. The original Orab-B Electric Toothbrush has a stand that is connected to the charger, something I do not like to be next to the washbasin (Water…
1.- Introduction Since I was a child, I was always attracted to puzzles that can be assembled in different ways, therefore, when I saw this Keythedral game, intermediately I though to create a puzzle. Few weeks ago I came across 1-49…
1.- Introduction As with all prints I do, all start or from a need or a lust-to-have. My son moved from one apartment to another and had a wall mounted cabinet but to be placed on the floor, so I volunteer my printer for 3D printing for…
Intro: This is an experiment I have done, by trying to design a Flexi figure out of three different hot peppers. Growing hot peppers is another o my hobbies. The first model is a KS Lemon StarrBurst , a pepper that was created by Khang…
Motivation Before the rain season starts, I was urged to create this model for covering a broken (already missing) drain strainer cover, so water from the rain can go into the sewer pipes but not get full of leaves or other material that…
Motivation This model is a replacement/repair of a garden metal table, that the foot legs rubber cover got broken due to the age and use. It is for a standard 20x20mm legs square metal profile, therefore the foot leg cover is has a hole…
1.- Introduction For 3D printing I use Octoprint running on a RPi4. When building the RPi I got also a clone RPi camera (~9 US$ then.) for being able to monitor the printer while printing with my Prusa MINI+. Took a while till I finally…
1.- Introduction Since I was a child, I was always attracted to puzzles that can be assembled in different ways. This puzzle is a simplification of the Octagonal Pillars Puzzle , that leaded to have all the 12 Quint 2D figures together…
Intro: In the 80s I was exposed to this puzzle formed out of wood, that with the years it got broken. (wood that got deteriorated and a friend that tried to solve it broke two of the pieces of it) Today you can find this wooden puzzle…
1.- Introduction As with all prints I do, all start or from a need or a lust-to-have. This model was designed as a need, when a cheap comercial product broke after few weeks of use. The model is “ over designed ” but it was fun working…
Motivation I grow hot peppers as a hobby which also include saving seeds for the next season or for giving away to any one that likes to grow hot peppers. Now, preparing the seeds for drying can be tedious and even painful if you do not…
1.- Motivation As with all prints I do, all start or from a need or a lust-to-have. The model was designed to be a return key holder for the 5 rooms rented by my workplace for us in a shared workplace with other companies, therefore there…
Motivation I could not find a Jewish-Calendar puzzle a day, so I decided to design one. It is not really a remix but a variation from the model published by Gadman in his remix of the Puzzle-a-day puzzle remix with bigger numbers/letters…
This 3D model comes to solve the missing lock on an old Tupperware round cake taker. I could not find one on-line, so I took the lock from the other side and designed a model that works, it took me two iterations, but because it is a…
1.- Motivation This model is a replacement/repair of door handle (and screen door handle) from our saloon to the garden, the old plastic got damaged due to age/sun/rain/usage, therefore, having a 3D printer and some Fusion360 skills, I…
1.- Introduction As with all prints I do, all start or from a need or a lust-to-have. My daughter who loves plants, has a rack full of plants but because the rack is not tall enough for the cleaning robot to go under, she asked me to…
1.- Introduction As with all prints I do, all start or from a need, a fix or a lust-to-have. Long ago (Few years ago) I posted a model for a toothbrush stand here in Printables. Now comes the second edition, which is a horizontal holder…
Motivation A week or more ago, our old frying strainer handle broke due to its age, heat and use. Just before moving the remaining strainer to the recycle garbage, Printables.com decided to put up a contest on repairs , so I took the…
1.- Introduction: We needed a nice small hook that would hang small oven cloth, to be hang next to our ovent in the wall of our wood kitchen. Explore my other Printables: https://www.printables.com/@rbid/models 2.- Printing: No special…
1.- Introduction: In the garden we have two entrance doors, mounted on a metal fence that slightly move during the year, therefore I need to have a spacer for the door latch that will allow the door to keep closed with enough tolerance…
These are all currently available results.
