Counting matching models…
with this nozzle you get circular flow in the pool instead of just straight in. It helps to keep the pool clean.
Print approx. €4.12–€5.04 excl. taxPreliminary estimate for PETGSource material: PET
After a lot of prototyping now my final version. KEY FEATURES lightweight for traveling cables up to 6mm in original size /small one 4mm cable big radius to protect cable from breaking wheel design to see the cable snap in design for easy…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
use 1.75mm filament as hinge pin. Unsaled model holds cards up to 89mm x 58mm. Its perfect to add personal Text. I did one with two color printing with one extruder. Following the instruction on https://www.youtube.com/watch?v=0Sla-vIsvh4…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
Works with original spool. I always have trouble printing hex designs. So i did a spoke design. This has much less retractions. During design I saw that it reduces print time if you only have one center hole so its done this way. original…
Print approx. €5.00–€6.11 excl. taxPreliminary estimate for one variant
Printed in PLA but all materials work fine. Consider using a FDA certified material for this. 0.2layer 2 perimeters
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Add Nov 2021 slider to lift the roof plate when closing the door Fits perfect to an IKEA LACK table with 55x55cm Or you us a 550x550mm wood plate. no disturbing table feet's you have full view access to your printer. It is designed for…
Print approx. €13.98–€17.09 excl. taxPreliminary estimate for PETGSource material: PET
NEW VERSION https://www.prusaprinters.org/prints/48024-fan-duct-optimised-for-anycubic-i3-mega Its getting more and more important to do fast prints. So this CFD flow optimized duct helps. As well you get much better bridges if you have a…
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for PETGSource material: PET
Universal holder for Smartphone with popsocket. Fits all standard PopSockets. There are four ways of mounting with cable ties through the special cable tie holes with a screw - diameter 3mm suggested with double sided tape with clip for…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
Easy to print Photo stand. Easy to scale universal use
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
After my old wheels are broken i wanted to buy spare wheels but they only sell them including the basket for 75.90EUR!! So i designed my own. Everything can be printed in one piece. The necessary supports are already included in the…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
Imprint on Lid on both side so you can put it on the desk to offer the cards. And still with the open lid the Logo is visible. Hole at the bottom for easy Access to the cards. Push them out with a finger. I add a blank model so you can…
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
looks great if you go for fuzzy skin in your slicer
Print approx. €1.90–€2.33 excl. taxPreliminary estimate for one variant
KEY FEATURES lightweight for traveling big radius to protect cable from breaking wheel design to see the cable snap in design for easy assembly clamp for cable center high friction grip for easy spooling both halfs have the same height to…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
important when hand cleaning that you whipe all viruses below your fingernails. Print instructions set bridge flow ratio to 1 so you get enough material for the brushes. If you want to decrease stiffness of the brush reduce to 0,7 - this…
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for PETGSource material: PET
easy to print brush. Can be used for beard - as i do - or hair. Works very well to clean pan or dishes. If after cutting the tips are to sharp use a lighter and give them a short heat - this will round the tips of the brush. Print…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
can also be printed upside down. Change the height an design by moving the model along the Z axis in the slicer - partially below the build plate If you want to have matching light shades see Lightshade
Print approx. €2.96–€3.62 excl. taxPreliminary estimate for one variant
Spare part for the bowl bottom support for standard Kenwood classic type. Easy to print - slots to avoid warping from the print bed. fits many different Kenwood kitchen machines Print instructions go for 0,2mm layer height. I use PETG so…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for PETGSource material: PET
This is to transport your 19mm e-cigarette protected from outer influences. Fits Joytec 19 or many other D19 products. Print instructions print the areas with threads with 0.12mm layerheigt the rest is printed with 0.2mm layerheight. I…
Print approx. €7.19–€8.79 excl. taxPreliminary estimate for PETGSource material: PET
NEW DESIGN: https://www.printables.com/model/496157-jetboat-hull-new-design Boat for wild river runs. There is a hull extension available to extend the boat length. THERE is a new hull design:…
Videos FULL HOTEND: https://www.youtube.com/watch?v=FDKF7qeqDSg https://www.prusaprinters.org/prints/47884-anycubic-i3-mega-hotend-fan-box-also-mega-s-mega-x This Design fits the original Hotendbox and fan of an Anycubic i3 Mega. Its…
I remixed the very nice design from Restore Doctor. Use a piece of Filament as hinge. You can use the lower bin part from the Original ore the on in this design they fit perfect.
This hull works with all the parts of this model: https://www.printables.com/model/51680-3d-printed-rc-jet-boat/comments/897854 https://youtu.be/-7sSGXb9A3U?si=2WvybAz3n-ELLGuw jet housing is included in this model. The deck has to be…
for easy storing my network cable during traveling. It is for 20m cable length. i modified it for 10m as well see on Prusaprinters. https://www.prusaprinters.org/prints/47891-cable-spool-ethernet-cable-10m
simple nice box fit standard pokemon cards Print instructions prints without supports
Features 26.11.2021 updated added duct with stopper at fan hole 18.2.2021 updated the fan duct for more spacing around the nozzle. BL touch standard parts flow optimised separation of hotend and nozzle coolin I wanted to have an easy…
Very easy to use cable winder. I improved some things from the original design. bigger diameter of the core to be useable for high quality cables clamp in the center so you do not have to search the cable center every time after…
for easy storing my network cable during traveling. It is for 10m cable length. 20m variant https://www.prusaprinters.org/prints/27496-cable-spool-ethernet-cable
I printed with 0,4mm nozzle an 0,12mm layer height. Threads turn out nice. If want to do it even better adapt the layer height at the threaded area to 0,08mm. But as told it works nice with 0,12 as well. Hole for screw is 3D print…
Silica gel ( i used wisedry changes color when saturated) Hygrometer Spool box mount https://www.printables.com/model/487842-dry-box-filament-roller-insert-ikea-365 roller bar
Fast printing because of optimized wall thickness - 2 times extrusion width. Stiff because of embossing's
You can glue the holder or you drill holes and mount it with screws. Works great with https://www.printables.com/model/115434-dry-box-insert-ikea-365
After many design interations now the fully fitting and working version
can be used on all E27 sockets. Don't worry about different socket mounting sizes. Ensure to use LED bulbs because normale ones will get HOT!!!! Prints very fast - about two hour on my printer. Uses only one perimeter. I printed in PETG…
Best to use ABS ASA or PETG. perimeter 3, layer 0.2mm 15% infill. After removing the old Hotend completely this slides on the bearings without loosing the rails again. You can use the original hotend fan. As well i used the original…
use double sided tape to stick to anything or magnets in the pockets.
The Ruthex files are not on Thingiverse any more - former thing:3342682. So i had to design my own. I am sharing if sombody else needs it too. Depending on your printer accuracy i added one block -0.1mm and one +0.1mm. So you will need…
spare part for IKEA extractor RYTMISK Ersatzteil für IKEA Dunstabzug RYTMISK Print instructions spare part for IKEA extractor RYTMISK Ersatzteil für IKEA Dunstabzug RYTMISK
chamfer on bottom to compensate elephant foot 3 perimeters line width 0.45 0.2mm layer height TPU flex material 0.8mm top/bottom tickness hide seam no retraction top pattern: concentric
I used PETG without support. Set extrusion width to 0.4 so it will be exact 3 perimeters.
your cupholder can still be used. I added F360 source file if you want to adapt to your phone size.
no supports needed. print the two small parts with 0,1 layer height I used petg
easy to print without supports. Use at least 2 perimeters Buy me a coffee to get rid of the last headache :-)
gondola to use with standard GT2 belts http://www.polargraph.co.uk/
These are all currently available results.
