Counting matching models…
This will securely hold an M18 grinder or oscillating tool and should work with most other brands as well. I recommend printing with four or so parameters for strength. No supports are necessary. The included holes are sized for #6 wood…
This a plastic slightly oversized Grade A Large Egg. I modeled it in order to create an egg carton , but I thought someone might want an egg, so here it is. I also a designed a version that unscrews to reveal a secret compartment.
A collection of various sized tunnel portals in N, TT, HO, and O scale to be used as tunnel entrances. They feature a stone texture as well a prominent keystone that can be inscribed with your railroad's initials, logo, or tunnel number.…
This will securely hold any drill type M18 tool, and should work with most other brands as well. I use these to store my M18 drills, impact wrench, and impact drivers. It even works with other tools that have a pistol grip, such as the…
This is a slide whistle that is remixed from Recorder v3 by lysithia81. It uses their whistle but a new body. Ideally it is printed in two colors, and it will need to be glued together to form two parts. The slide should be printed on its…
This gas cap holder fits gen 3 Toyota Tacomas. I recommend printing it PETG or some other material that can survive higher temperatures. PLA will probably warp and become brittle over time.
This will securely hold an M18 random orbital sander and should work with most other brands as well. I recommend printing with four or so parameters for strength. No supports are necessary. The included holes are sized for #6 wood screws.…
This will securely hold a Milwaukee M18 Fuel jigsaw (model 2737-20) and should work with other brands and models as well. There is a relief slot so that the saw may be stored with a blade in place. Additionally there is a circular feature…
This will securely hold an M18 7 ¼" circular saw and should work with most other brands as well. Update 2/10/23: A user has reported that the mount is too narrow for his M18 2732-20, it does it my 2631-20 and a few other people are using…
This trestle system allows for inclines and elevated sections of Fastrack. I have designed sections in 5mm (0.2in) increments. Combining this with 10inch sections of Fastrack will result in a 2% grade. It recommended to place a trestle at…
This an 80mm objective diameter, 330mm focal length refractor telescope. It is a work in progress, but it should be functional as-is with some fuss and fitting. each section is small enough to be printed on a Prusa Mini. It uses this…
A small gantry crane for loading Brio/Ikea compatible trucks and trains. A 9mm x3mm round magnet is required, a small quantity of glue, as well as 8 M3 screws. Also feel free to check out my other train related items: Swerving Track for…
This is a modular enclosure based around 1mm thick acrylic sheets and 20mm aluminum extrusion. I made mine to fit a Prusa Mini+ (50cm by 50cm by 50cm), but the dimensions can easily be scaled to fit any printer. To build this enclosure…
A small boom crane for Brio, Ikea, or other wooden trains. It is based around a standard 150mm section of straight track. Hardware required for assembly: 3x M3 screws ( I used 6mm, 15mm, and 20mm, but the lengths required are fairly…
This is a double height trestle for Brio type trains, with a a connection at standard and double high bridge heights. This model prints without supports, but it does require some bridging. I would also recommend a brim to ensure a…
This is a simple handle for hand files. There are three sizes posted here, for files with small, medium, or large tangs. Feel free to scale the handles or message me for a custom size. Depending on the exact size of your file tang, the…
This is a guide for drilling holes in 2020 aluminum extrusion. It has holes at 10mm intervals from 10mm to 100mm. It is useful primarily as a layout and marking tool, obviously PETG is not going to keep a steel drill bit from wandering.…
These are a variety of brio compatible switches, and they will work with most brands of wooden trains. All pieces print without supports. Feel free to message me if you need a custom size, and click here to check out my other train designs.
Do your trains need a spot to sleep at night? This engine shed gives one engine a spot to rest, or stick multiple together to house the whole fleet. A bit of CA glue is required for assembly. 10 6mm by 2mm round magnets are optional to…
A cap for a one pound propane cylinder, used to keep it clean and protect the treads. It should be printed in TPU and without supports.
A support for the Ikea/Brio type train bridge. It will fit slightly larger than typical trains. If you like this model check out this collection of my other toy train models.
A simple three lobed knob that uses an M4 cap head screw. A drop of CA glue is used to secure the screw in the knob.
This is a AA Dummy Battery. The included gcode prints in two colors for a more realistic appearance
This adapter allows one to use AA batteries in place of C batteries. I use them so that I can use rechargeable AA cells in my kid's toys that require C-cells.
Do your Brio/Ikea/Wooden Trains need to load up on water before their next run? Now they can. This model is compatible with all of the normal wooden train brands. Instructions: Simply print all four of the pieces. Unfortunately the pillar…
A set of gears, spinning wheels, and a simple maze for a toddler busy board. All screw on with #6 wood screws. 16mm M5 bolts are needed to attach the gears. 12mm M3 screws are needed for the maze. The spinning wheels require a 6mm shaft…
This is a regular old egg that unscrews to reveal a hidden compartment. It could be used to store candy for an Easter egg hunt, or to hide very small quantities of treasure.
A shipping container that will fit on Brio, Ikea, etc train cars. An M5 bolt goes in the hole in the top so it can be lifted with magnetic cranes and the like. If you like this model check out this collection of my other toy train models.
This mount holds a single monitor with a VESA 100mm by 100mm mount. It can support the monitor in either a horizontal or vertical configuration. 2020 aluminum extrusion is used as a frame and stabilizing legs. By varying the length of the…
This is a replacement leg clamp for the "Heavy Duty Alt-Azimuth" tripod by Celestron (Item #: 93607). It turns out “heavy duty” was a bit of an over statement. I got one of these tripods from an auction site as an Amazon return to use as…
This handy mount allows one store M18 batteries on a wall or under a shelf. It has two integrated countersunk #6 screw holes for mounting. No supports are necessary if your bridging skills are up to it. I have designed other similar…
This is a small funnel that screws onto soda bottles. I use it to fill my squirrel resistant soda bottle bird feeder . Thanks to steffanders for the bottle threads .
This wheel replaces the wheel from a 22inch Weber Kettle Grill. It probably will fit a lot of other grills as well. The wheel diameter is 6inches (150mm) and it will fit a 10mm shaft. I purchased a 22inch Weber Kettle Grill from an Amazon…
This is a small egg carton to hold two eggs. It was designed for when I only want to bring a couple of eggs camping, but it may also be useful for bring an egg or two in a lunch box. Really anytime you need to protect or transport two…
This is an STL for a Kindle Paperwhite (11th Generation model M2L3EK), I designed to use as a digital mold to make a case.
This a model of a Pixel 8 phone I made in order to design a print a case out of TPU. I got lazy and just ordered a case, so I never ended up designing one. But I thought that someone might have use for a model of the phone.
This is a mount for the Anker 4-Port Ultra Slim USB 3.0 Data Hub model A7516 . It has three counter sunk holes for #6 wood screws.
This is a mount to attach an Amazon Basics USB Extension Cable to the underside of a desk or other surface. It has two 5mm screw holes and can be printed without supports.
This seesaw will work with Brio, Ikea, and all other similar wood train sets. This part has 216mm of track, making equivalent to a Brio type “D” piece. All parts print without supports. The ramp piece should be printed upside-down. If you…
This is a 1/2 standard height bridge for wooden/Brio trains. It can be printed on a Prusa Mini sized print bed and is a gradual enough slope that the trains shouldn't bottom out. Using the included piers, these can be paired to make a…
This is a dummy AAA battery. The included gcode prints two batteries and uses multiple colors of filament for a more realistic appearance.
These buffer stops will keep your wooden trains from running off the ends of the rails. All pieces print without supports. Feel free to message me if you need a custom size, and click here to check out my other train designs. Update 17…
This will securely hold an the detachable side handle used by M18 drills. I recommend printing with four or so parameters for strength. No supports are necessary. The included holes are sized for #6 wood screws. I have designed other…
This little bridge will let your trains cross tiny imaginary rivers. Depending on your bridging and overhang capabilities, some supports may be required. If you have a small printer like a Prusa Mini+, the bridge will fit on the print bed…
This guide block uses magnets to align up to 10 letter stamps for 5/16" letters. The stamps can be up to 10mm across. It takes circular magnets that are 6mm in diameter and 3mm thick. Let me know if you would like a variant for different…
These are a set of braces or gussets for 20x20 aluminium extrusion. They connect with t-nuts to provide connections or additional support. So far I have designed them for M3 and M4 socket head screws, feel free to message me if there is…
This mount holds a phone and uses a 1/4 20 threaded insert to provide a tripod mount. No supports are necessary. A small section of 3mm (or about 1/8 inch) shock cord is required to provide clamping force.
A small clip used to hold pieces of O scale Lionel Fastrack together.
A gas tank that will fit on Brio, Ikea, etc train cars. An M5 bolt goes in the hole in the top so it can be lifted with magnetic cranes and the like. The included gcode prints in two colors, one for the base, one for the tank. No supports…
This is a remix of Nikon to Telescope Adapter 1.25" by Carsten , but with a 20mm longer barrel for telescopes that need a bit more length to get in focus.
This is a a medium length (148mm) straight train track that is compatible with Brio, Ikea, etc. If you like this model check out this collection of my other toy train models.
Tired of your trains running off the end of your track? Install these bumpers today. These bumpers are compatible with Lionel O scale Fastrack.
T-slot nut for aluminum extrusion that utilize M3 or M4 nuts.
This is a print in place design for a tool to accurately size kid's shoes. It is as large as can be printed diagonally on a Prusa Mini+. Supports are required only under the slider in the circular cut outs. Either use a sharpie to color…
Under desk mount for FiiO headphone amplifier (E10K, E10K-TC, etc). A tab allows the amp to be retained in place, but still easily removed when desired. All of the amp's ports and controls remain accessible when the device is mounted.
This handy device holds breastmilk bags and a marker to your fridge with the magic of magnets. It will fit both standard as well as Motif bags. Although I would recommend the "marker on left" version for Motif bags. It prints with no…
This breakdown crane and accompanying jib carrier are here to help any broken down trains. They are compatible with Brio, Ikea, and most other wooden trains. Parts List (crane): 4x M2 cap head screws 6-12mm length 4x M2 washers 2x…
This Brio and Ikea compatible reversable piece of track swerves one track width to the side. I have included two lengths. The 150mm (6 inch) piece is about as short as it can be while still having the curves be gradual enough to allow…
These are soft jaws for a 4" vice. They cover the existing steel jaws which measure 4 1/2" by 3/4" (or 115mm by 20mm). They have cutouts for holding round objects and for better grip. No screws, magnets, or other fasteners are required;…
This is a 3D model Anker 4-Port Ultra Slim USB 3.0 Data Hub model A7516. I designed it in order to make a mount for it, but I thought someone might have use for it.
This minimalist headphone holder is mounted to an steel surface with magnets. I use it to hang my headphones from my computer case. There are recessed holes for five 10mm by 3mm circular magnets. Unless your headphones are super heavy,…
This cup holder snaps on to the arm of a Ikea Poang chair. It can hold most regular cups, including mugs with handles and canned beverages. I previously made two versions for the kids chair, for small and large cups .
This a claw for a Duplo Backhoe used in models such as 3272, 3295, and 3295. It is not an exact reproduction, as I am missing the claw in question; thus this model. However it fits well and can scoop a 2 by 2 block. It can be printed in…
This collection of bridge pieces will take your trains to new heights. They are compatible with Brio, Ikea, and most other brands of wooden trains. Ramps Two different types of ramps are offered. The “N type” ramps are very similar to the…
The QS-39 fits Vanguard tripod models Alta Pro 263AB 100, Alta Pro 264AB 100, SBH-100, SBH-250, SBH-50, Alta Pro 253CB 50, Alta Pro 254CB 50, Alta Pro 283CB 100, Alta Pro 284CB 100, Abeo 283AB, Abeo 323AB and Tracker 1, 2, 3 & 4. It is…
These audiophile grade speaker spike to speaker feet conversion pucks are designed to enhance the sound stage and mid-range modality of most modern (and a few vintage) speakers. Using 4D computer simulation the precise harmonic resonance…
This knob slides over the original breather valve knob to make it easier to grip.
This t-slot nut is designed to fit this milling table . It may fit others, the key dimensions are shown in the photos. It takes an M6 nut and bolt.
These are all the standard curved sections of track and are compatible with Brio, and most brands of wooden trains. I have also included a one half standard size (22.5 degrees) of the tighter radius curve. All pieces print without…
This little shunter will happily pull around your Brio and Ikea trains. Parts List: 6x M2 cap head screws 6-12mm length 6x M2 washers 2x 10x4x3mm ring magnets 2x 10mm diameter metal push pins A touch of CA glue Printing Instructions:…
This squirrel resistant bird feeder uses a 20oz or 1L soda bottle as a hopper. The perches are supported by four springs, so that when a heavy creature like a squirrel climbs on it, the food doors close. By varying the strength of the…
Use these stack-able bridge supports to make bridges, of any height, for your wooden trains. They are compatible with Brio, Ikea, and most of brands of wooden trains. The track piece prints easily without supports. The legs should be…
This two piece case keeps your sockets organized. It is designed to fit a 10 piece (5-14mm) 1/4" drive set (by Quinn specifically, but any comparable set should fit.) The base piece is best done with one color change for the labels. The…
This 2 to 1 crossing allows you to make a street intersection or simply cross multiple other tracks. Two 10mm M3 screws and a bit of CA glue is required for assembly. Optionally eight 6mm by 2mm round magnets are recommended in order to…
Four M3 cap head screws are required for assembly. Two should be 6-12mm long and two 10-16mm long. You will also need a bit of CA glue to secure the roof. If you like this model check out this collection of my other toy train models.…
This is a compact launch pad used to launch model rockets. It folds up for easy transport and storage. This launch pad uses a 1/8" guide rod (steel rod should be available for a couple of dollars in any hardware store). It should be…
Ever want to deliver a beer with your O scale train? Now you can. This mount snaps on to a Lionel O-scale flat car, such as the pictured Pennsylvania 473897, using the stake holes. It will safely carry a standard 12 oz aluminum can. All…
This draw bridge (otherwise known as a bascule bridge or lift bridge) goes up and down with gates and is compatible with Brio, Ikea, and other wooden train sets. Multiple versions are available. The standard height version matches the…
This handy flash light takes M18 batteries and uses off the shelf electronics. Additionally it has USB ports for the convenient charging of your electronics. Note : This is still a fairly rough design. The project is fully functional, but…
Replacement for Step2 Showers Splash Pond Water Table Part M, likely it will fit several other Step2 splash table sets. Unfortunately supports are required.
This is a storage/travel case for the Kindle Oasis 9th Ed model CW24Wi. The kindle is held in place by magnets. I like the slim form factor of the caseless Kindle, so this case is designed to keep the screen safe, while being easily…
These small passenger cars are great for transporting your townspeople wherever they need to go. They are compatible with Brio, Ikea, and most other wooden trains. Parts List (per car): 4x M2 cap head screws 6-12mm length 4x M2 washers 2x…
A fun little wind up boat for your kids. A small rubber band provides power. The enclosed rear section makes the boat unsinkable. Three 10mm M3 screws are required for assembly.
This is an accessory mount for a Celestron C8 telescope that provides a standard 1/4 20 screw to attach a spotting scope. I designed it to mount my 3D printed 80mm f/4 refractor to my C8 telescope. It requires: one tripod screw - to…
This is a stand to hold record sleeves while the record is being played. It is not printable without supports. It also features a small place to store a brush as well as places for three small magnets or rubber feet.
These are all the standard straight sections of track and are compatible with Brio, and most brands of wooden trains. All pieces print without supports. If you have a small printer like a Prusa Mini+, the type “D” piece will fit on the…
This little box is great for keeping small treasures.
Need to get your trains on or off the rails? Now you can. If you like this model check out this collection of my other toy train models.
Parts List (per car): 4x M2 cap head screws 6-12mm length 4x M2 washers 2x 10x4x3mm ring magnets 2x 10mm diameter metal push pins A touch of CA glue If you like this model check out this collection of my other toy train models. There is…
This coaling tower can provide fuel for all of your Brio or other wooden trains. Multiple versions are available. One version is split into three sections to allow for multiple colors without an AMS. If you like this model check out this…
This small enclosure allows for the mounting of a switch and relay. Additionally, it has M5 threaded inserts to serve as connection points for wiring.
This gear replaces the central drive gear in the powered truck of the Lionel Chesapeake & Ohio No. 624 Switcher. I purchased this locomotive as “for parts or repair” from an auction site, and it needed considerable work. I wanted to see…
These lens covers cover the objective end of Nikon Prostaff 3S 10x42 binoculars, but they may be compatible with other 42mm binoculars. I got sick of having to put my lens covers in my pocket like a peasant. These covers just flip down…
This door stop is a stop sign. Or is this stop sign a door stop? This model is split into three pieces for multicolor and multi-material printing. I printed it in PETG out of convenience, but TPU would have more friction on the floor. The…
This switch box uses four 15mm switches to allow four outputs to be controlled from a single input. I use it to control decouplers on my o scale layout. It is scaled to be constructed with M5 hardware.
This little shunter will happily pull around your Brio and Ikea trains. Parts List: 4x M2 cap head screws 6-12mm length 4x M2 washers 2x 10x4x3mm ring magnets 2x 10mm diameter metal push pins A touch of CA glue Printing Instructions:…
This a decorative flagpole end for 5/16 dowel
This bolt-on addition to a cage-style suet feeder gives woodpeckers and other birds something to lean their tails against. There are decorative reliefs of two birds cut into the sides. When printed in two or there colors, these inlays…
These are a set of clean and dirty laundry tags for the organization of packing cubes and the like. They should be printed in two colors each. The included g-code is set up to do this.
We use plastic grocery bags to hold the slinkiest of diapers. This little hook slides on the rail of our changing table. Put table has an 18mm rail that this hook slides onto.
