Counting matching models…
Model is subject to change as currently I am working on something much bigger ;) The model of the first two cervical spinal vertebrae, commonly referred to as atlas and axis along with the vertebral artery. All models were sculpted in…
A model of the tibia and fibula that I sculpted in blender partially from memory and from reference material from Gray's and Netter's Anatomy. As usual, if you find something wrong model whether it be an anatomical or proportions issue…
An anatomy model of the femur that I sculpted in Blender.
Do you have a foot fetish? Are you an enthusiast of anatomy? Do you enjoy unoptimized meshes? If any of those reasons resonate with you then this is the model for you. A model of the bones in your foot. All the models in this collection…
A model of the nasal cartilages that I sculpted in Blender with reference material from Gray's and Netter's anatomy.
The model was scanned from the $5 Aliexpress MICH helmet that I ordered years ago for airsoft. Add foam pads to the designated areas if you want. I removed the foam pads for this scan as I was more interested in the hard sections of the…
A sculpted model of the brain's ventricular system with a high poly count. Choroid plexus not modeled. The separate ventricles are provided along with the complete model. dimensions may not be accurate. Netter's anatomy was used for…
I model of the cartilage involved in producing speech. Separate models and the complete construction are provided for you. if you see any errors or omissions please let me know. Particularly the cricoid anatomy is probably slightly off.
I modified a chin mount model posted by using a much more detailed scan to capture data. The helmet was scanned with a Metro X scanner in feature tracking mode due to me being too lazy to use the lazer mode. I have also attached the…
I F**KED UP THE SCALE. MULTIPLY SCALE BY 10. A laser scan of my M12 Stubby Impact.
A model of the hyoid bone that I sculpted in Blender over an afternoon. Due to the variability in hyoid morpholog, it is highly likely that this model is not representative of all subsets out there. I tried to be as accurate as i could to…
Contains two models. The remote full assembeled scan and just the battery cover. Did spend some time cleaning up the tabs in Blender, so if you found this usefull please give it a like.
Disclaimer: This model is part of a larger collection of ZX-4R 3D scans that I have on my profile. All models were scanned with my Metro x laser scanner at 0.2-0.3mm resolution. If you have managed to break any of the parts, you can use…
I initially did this scan to make a custom mount to attach the camera to the mirror of my ZX-4R and I hope that you can find some use for it as well. The upper half of the camera itself (area with the lens) is not very accurate as I had…
Do you want to make a custom mount, or do you want to see how big a Cardo PackTalk is before buying? This is the model for you.
I 3d Scan of my old broken PS4 DualShock 4's L2 trigger, D-pad, and top main body. I have not printed it yet, but please do let me know if you do. I cleaned up the main body as best I could before I stopped caring, about 3 hours in. The…
Don't want to spend 15.99 CAD on a colored mag ring? This 3D scan should allow you to print out whatever color ring you want for your MAG quadlock iPhone case. I have not printed this yet but will update the model with revisions if…
Where do I keep getting these hands to scan? I guess we will never know. If you want a larger male hand, I also have this model on my profile, along with more anatomy models ↓↓↓↓…
3D scan of the combination oil filter socket/wrench that I had lying around. The socket has a 1/2 inch drive and is compatible with Toyota and Kawasaki oil filters. Do not use with a 3/8 drive reduction if you are trying to remove an oil…
Scale by a factor of 100X to get accurate dimensions Please do not insert into your urethra.
This model is a scan of my zx-4r's rear pillion/passenger seat. Use it for what you will. Lost, ripped or broken seat? This should hopefully help! Will slowly start to create a catalog of scanned parts as I do mods on the bike or whenever…
Big thanks to CNC Kitchen for creating bumpmesh.com . The base mesh, after being cleaned up in Blender, was put through Bump Mesh to create the modified models. Designed for 22mm diameter, 125mm length handlebars. I have included the…
As I couldn't find any good models of the skull online for free that actually had accurate anatomy so I decided to publish this model for people looking for a high-resolution model of the skull. The cranial cavity is partially modelled.…
Disclaimer: This model is part of a larger collection of ZX-4R 3D scans that I have on my profile. All models were scanned with my Metro x laser scanner at 0.2-0.3mm resolution. If you have managed to break any of the parts, you can use…
A laser scan of my ryobi 2ah 4v inspection lights battery and "battery cap". The top portion of the battery is translucent (green in this image) and cannot be scanned so I reconstructed it. The dimension of the usb tab may be slightly off…
Replacement part for an airsoft mp5 rear sight .
A laser scan of my AirPods. Good for a prop or a custom case.
Metro X laser scan of my zx-4r's seat.
Version 2. This is the second version of this model. I have changed the model to make it more functional and cleaner-looking. The original model had walls that were too thin and could not be printed properly. The key chain hole is 4mm…
3 models are included below: The windshield itself. The attached black portion of the windshield covers the wiring for the dashboard. The rubber grommet required for assembly in case you lose the original ones for some reason? print in…
In case you managed to loose your RST Tractech EVO 3's toe slider due to the screws (M4x5.5mm and M4x7.5mm (2.5mm allen head)) coming loose. The model was scanned in cross laser line mode with my metro x scanner at a 0.2mm resolution.…
A quick scan of a seahorse ornament in my bathroom with my MetroX scanner. Cleaned up in Blender.
A metro X laser scan of an M18 Milwaukee battery.
I have included 2 models. 1 made to fit my pc fans' outline/silloete and 1 universal one. I recommend that you print one of each. The extra universal one can be used to make a flush window mount if you just cut some plexiglass or foam as…
This is a quick 3d scan of my Lexus NX250 key fob. Mainly made this as a preformance test for my metro x scanner when dealing with shiny objects. The obj mesh is a quad mesh created with instant meshes.
Tired of wasting money on scanning markers. Having trouble getting your laser scanner to track a thin plastic part like a motorcycle fender? Print 20-30 of these and attach a 6mm/3mm or 8mm/3mm magnet to the bottom of each. The magnet…
If you want to create one for the other provinces or motorcycle plates , look into the files for this model. BLENDER INSTRUCTIONS: Move your desired letters from the selection of meshes provided. You have to align the origins of the…
Created this years ago to repair my broken Airsoft MP5 charging handle. I have included the original model and the pin alone in case you want to make your own custom one that is more textured or with a different shape.
The battery cover was 3D scanned separately and merged in Revometro. The accuracy of the volume buttons is slightly off due to the merging. The rest of the mesh should be accurate. The model was scanned with my Metro X scanner in laser…
Finally got around to removing the front sprocket cover to clean the front sprocket, only to find out that the front sprocket was clean, somehow. Not so much so the area around it, however, due to me using gear oil instead of wax which…
A metro X color scan of an onion. Due to the lighting the onion texture is slightly missmatched on the areas that the top and bottom meet. Textures are included. Scale to 100 percent in orca slicer.
I always thought that the sander attachment for the M18 multitool did not have big enoght duct holes so I made them bigger. Also included the original, cleaned-up scan.
A quick scan of a wooden container I found.
This is probably the largest thing that I have scanned so far. You can find more ZX-4R scans in the collection linked below. https://www.printables.com/@IsopropylAlc_2599466/collections/3158680 All of the parts were scanned at 0.2mm…
The quality of the revit logo is a little scuffed, but I don't care enough to fix it. The scanner does not like pure white next to black so the level of detail is not all there on the logo but the model is fully functional and not visible…
Wanted to make a mount for my Philips Series 1000 Shaver. You can find that here. Its kinda shitty but ok. The shaver and cable were scanned at 0.3mm resolution and then cleaned up in Blender. The charger should be universal between most…
A laser 3d scan of my M18 Multitool / Oscillating tool
I have included two models in this post. One of the keys is a blank that you can use to create your own key. Just take an image extra the outline and extrude in 1.1mm on each side. Make sure to mirror the mesh on the other side BOTH on…
A quick scan of my AGV K3's Top Vent, as I managed to slightly chip the vent on the other side. The included model is from the rider's right vent. Mirror in the slicer if you need to repair the left vent.
If you are a white woman obsessed with finding meaning in your life, this is the 3d scan is for you!
This is a 3d scan of my pathetic, skinny hands done with my Metro X scanner in feature tracking mode, all for your enjoyment. If you enjoyed this model you can also check out my similar anatomy models below ↓↓↓↓↓↓↓↓…
I f**cking hate this thing. It does nothing but make me flaccid. The curves and geometry evoke a vibe, which is objectively repulsive. 4/10
Did you break or lose your license plate whilst engaging in toomfoolery? This stock Kawasaki license plate bracket is here for your convenience. Disclaimer: This model is part of a larger collection of ZX-4R 3D scans that I have on my…
A 3d scan of my ZX-4R's mirror. The mirror should be universal across the recent Kawasaki lineup. This specific model was used to create this Insta360 mount if you are interested. (Soon!) The outside was scanned. I have included:…
This is a simple model to allow you too route cables through the back of your IKEA Billy Shelf. You should be able to route 2 normal sized US cables through the hole and a bunch of little other cables. Scale the X and Y to 125% if you…
I laser scan of the chin guard that can work with my AGV K3 helmet. Sh*t helmet. I hate it. Get a Bell Race Star. Anyhow, this scan exists. Use it as you please. I trimmed and removed the fabric part of the chin guard that hangs out to…
This project was mainly inspired by the work of MKotsamanes. Considering that the original page is down, I have included his work here also, along with the original SCAD file. USE HIS FILE IF YOU NEED TO MAKE ONE FOR OTHER PROVINCES OTHER…
This is a 3d Scan of my ZX4R's Front Cowling Part Number: 55028-0726. I cannot guarantee that this will fit properly, as I have not scanned or really printed anything at this scale. The model was cleaned up extensively in Blender. Pain in…
Did you lose your front vent plug for your Bell Race Star? Inshallah, you will not lose this one. Inshallah, you will not traumatize a family of 4 by ramming your motorcycle into the back of their minivan whilst speeding on the 401. Print…
Bought a set of Mastercraft (Canadian Tire Brand) Chisels and wanted to hang them on my tool shelf. So this exists now. Clicks into place. Wish it came with one CANADIAN TIRE‽ I have included the Fusion 360 File if you want to make your…
Intro: If you found this useful, please do leave a like and a comment for any possible improvements or reviews. I mainly wanted to just scan the knee grip part to create a knee grip that actually grips the rider well. The stock is just…
These earplugs were the only model of earplugs that in my whole life fit my ears without falling out or feeling like hell. You can find them at Homedepot and they are worth the money. I mainly use them when riding my motorcycle, and…
This model is for the left side of the bike. The right side is identical, but just mirrored. If you need the right side, just mirror it in your slicer. The model was scanned using my Metro X scanner and then cleaned up and rendered in…
A 3d Scan of a squirel holding a nut.
The insides were modelled and cleaned up in Blender. Insert a standard 3mm plug at the bottom. Scanned with a MetroX scanner. If you found this useful, please leave a like.
A quick 3d Scan of a candle holder ornament thing in my house. Fits the standard IKEA candles on top. The model is a combination of 2 combined scans, and you can kinda see the seam if you analyze the normals. Should be more than detailed…
INTRO: This is the second addition to the knee grip fairings project, which can be found here. This one is intended to add some grip to your thigh area. The model was created by: Creating a faceset on the original fairing by using normal…
This should hopefully be the final in my customizable grip series for this bike. Maybe some winter accessories next? You can find the thigh grips and knee grips at the links below. I have included, as usual: 2 blank models that you can…
Found these cute pea salt shakers and their associated pod shaped holder, so I 3D scanned them and recreated the internals in Blender. Is it food-safe? idk. Looks cool tho. I have included all the models and the associated Blender file…
Wanted to make a sleek mount for my badminton rackets so that I could mount them to the wall. THERE ARE 2 MODELS INCLUDED. One version includes a shuttlecock holder. Customization: The rackets that I have have 7 mm diameter stems. I have…
Installed my quadlock a while ago, and I could never remember where I placed the steering tube cap that comes on the bike. Well, I found it, but I will probably lose it again, so this 3d scan exists. You could also make your own custom…
A simple 3d scan of my quadlocks expanding collet thing that secures the quadlock mount to the steering rack. This is the small version. Cleaned up in Blender and scanned using my metro X scanner
These are all currently available results.
