Counting matching models…
A Basket and Chute to capture filament poop from the Bambu 3D printers. Its fairly narrow and with a removable basket so that the printer can be moved against a wall or other obstruction. *** Magnets go inside the chute on the inside,…
Wall mount for an AppleTV 4K Gen 3 and its remote, I have only tested it in the Gen 3 4K, however it may fit the older 4K models but not the Non 4K versions. (Remix of Tactical_Dev's AppleTV wallmount bracket -…
Cables can be tucked away into the space behind the bracket so great for racks with very little space up front like mine. Option with CNCed front plate ( Fusion files included so you can do tool paths ). Requires 5X 10mm M3 countersunk…
Needs 2 hold down knows on M6 Bolts. Hold Down Knobs Here. https://www.printables.com/model/210965-holddown-knob
Need to deflate your tires (tyres) for off road and are too cheap for a proper tool? Someone parked in front of your house blocking you in? Well I have the thing for you. Simple, easy . fast and super cheap. Fusion files included. Print a…
A remix of J4nm4Nn Ashtray with a slight draft and chamfer here and there. Main reason for the remix was to add text to the bowl. Fusion files are included in case you want to edit the text or number of cigars supported. The last sketch…
Kreg router tables and lifts only come with 3 inserts , 2 small and one very large with nothing inbetween. These inserts fill that gap making using intermediate sizes of router bits much easier and safer. No supprt needed though I do…
Very basic sets of draw insert organiser trays designed to print very quickly with very little filament. Many different sizes.
An angled bracket with captive nuts to angle the stock Ender 3 spool holder (Or upgrade stock bracket , in the case of mine) out of the way of a direct drive. 2X M5 Nuts requires (4mm think) Its friction fit in the extrusion so fitment is…
A Remix of SkyGuys great iPhone stand for the P1P. This version has a few differences: Easier to print. Internal cable management. Does not block the top from having a panel installed. Supports P1S. Supports the same phones. Support is…
Remix of DustBunny67's clamp pads. models from scratch ( Fusion 360 files attached) . The original Pads had slightly different slots so the Outer pads did not fit the Aldi clamps I had. I have made them match and beefed up the tips. Print…
Mounting Bracket for the Voron AfterBurner Extruder, I have added a fixed BLTouch Mount as the removable ones seem to be too flimsy for my liking. Spacers included for the BL Touch mount , I uses about 5mm worth. x_offset: 37 y_offset: 6…
A top mounted holder/mount for Ozito cordless drill, impact driver and batteries. Prints with no supports, should work with most filaments ( I used CF PLA) . Spacers included in case you have a lip on the surface these are mounted too…
A 3D printable version of a standard Emergency Door Reset key. I have tested the 2 prong side of the key but not the single prong side. Its abit harder to push in than the factory version but does work.
A simple comb for spreading glue over wood surfaces for a glue up. 3 versions, Flat and 2 with different grooves for the thumb. also including a hole for hanging on a wall. Fusion360 files included Print Settings Printer Brand: Creality…
A carbon filter that attaches to the back back of a Bambu Labs X1C and P1S over the exhaust fan. Requires: 4X M3 Countersunk Bolts ( 6mm, preferred but up to 20mm should work). 4X M3 Heat set Threaded inserts ( 5mm long and about 5mm…
Simple replacement screw for a HJC CL16 helmet screw. They are a standard M6 thread but with a large flat head. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.1 Infill: 20 Filament: NA PETG…
Bambu Labs AMS Helper Slightly Shorter than dkarjadi but taller than the other remix and support for front silica gel.
With my New direct drive Hot end cable management through the frame and out the back was not overly practical for taller prints so I made this bracket to retain the cables at the front over the X Axis end stop. Print Settings Printer…
Replica of a now discontinued CAO Flathead Ashtray. Original is slightly off square while mine is not so not an exact copy. Fusion Files included Will upload photos once printed. No Special requirements to print but its pretty large so…
Cable Bracket for use with the Teaching Tech rear controller box. https://www.thingiverse.com/thing:3688967 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 15% Filament:…
1U Rack Mount for up to 5 Rasberry PIs . Options for partly 3D printed / CNCed and fully printed (Images are from my part and part version). Blanking plates and a POE power supply trays included. The pin is only required for the printed…
2 of the wall mounts are required and screw into the PC using existing M3 holes. Print 4 of the drill guides to help drill holes into the wall with the correct spacing and then either screw into the wall using those screws or print 4 non…
Lead Screw Knob for the Ender 3 or Similar. Simple Remix based off the linked Knob but was a total remodel to match a similar extruder knob. Fusion File Included Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports:…
A Simple Bracket to Mount a PS4 controller under a desk. Designed for a work colleague and I have not tested the Fitment yet, Will update as required. 3 Screw holes , 4mm hole. Fusion Files included for anyone that wants to modify it.…
Replacement Feet for a Pinnacle 4 Tier Adjustable Shelf (G0S186) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.25 Filament: Generic PLA Black Notes: Lots for Top and Bottom layers and 3 Walls…
M6 Holddown Knob , Can be used with a T-nut or screwed directly into an M6 threaded hole in a Jig. Drop a M6 Nut into the part while printing, pause at 13.2mm. Fusion files included.
A Remix of Zuch95701's Draw. The main change is inclusion of a SD card holder that lines up with the Teaching Tech rear controller. Some other small changes: Added a few chamfers, increased the tolerances a tiny bit. Removed a divider in…
Remix of MasterFX's Classic Bag clip. Changes: Added chamfer for easier closing. Small Tab and notch for less vertical play when closed (made the stock one seem cheaper in the hand) Chamfer on the hinge end of smoother look. Mind was a…
Standard Straight and versions for sand included as well as fusion files
A hook that attaches to either a Euro style or US ACME thread brook handle or pole with a similar thread. Originally designed to remove a pool robot from a pool if it gets stuck . Prints in 2 parts for better strenght, easier printing and…
Space for loads of silica gel and a bowden tune to connect directly to printer for maximum dryness. Notes: The Roller is made of several parts, the main roller, the Roller Pin and 2 washers as well as 2 x 608 Bearing. It was made in…
Super Simple Guide for a DIY Track Saw Tracksaw is just a piece of Ply or MDF with a 12mm Alu Angle attached, This print keeps the Saw from drifting away from Alu angle. Slots into the Existing Guide slot on a Makita Saw and is secured by…
My robot vacuum kept in stealing and hiding my door stops and some times riding up onto them and gettign stuck so I made a door stop thats harder to steal or ride up onto. Printed with 85A TPU with 4 walls and 8 top layers, with 90 or 95A…
A replacement filter for a Catit Pixi cat fountain, mainly to keep cat hair from clogging the pump but does reduce dripping a small amount. Print in PETG / HIPS or other food safe filament. Print with 0 top and bottom layers , 60% grid…
Basic Filament Ronout Sensor Requires a small micro switch: Dimension: 20 x 10 x 6mm (L X W X H) as well as 2 M3 bolts ~6-8mm . Bowden Tube can be inserted into the larger end to affix the box to an existing system . Used with a BMG dual…
A wrench for tightening Bykski hardline watercooling fittings. Save your fingers trying to tighten fittings my the threads. Only tested with Bykski “Anti-Off” hardline water cooling fittings , Its a pretty tight fit so you may need to…
Orignally an extra work support element for the Bessey Kbody parallel clamp, after being annoyed with the clamps tilting over when mostly cosed I made an extended mvoer that works as foot.
Cheaper Ammeter / Voltmeter show the PCB on either sides of he display and white edges can be seen when viewed at an angle. Printed a Couple of different types of blacks to cover this up. The first just covers the PCB and does attempts to…
Managment Clip for a Yellow Tongue (Yellow Plastic Cable Snake ). Print a couple and they hold the snake in a loop. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Filament:…
Pi Camera Housing and Mount with integrated LED Lighting. Removable Mount Joint to allow for alternate options. Mounting the Camera at the rear keeps the camera out of the way and is an easy guide for the rear clearance needed for the bed…
Model for an Overclockers.com.au member. Fusion 360 model and STL just for lols Category: Parts
An Adapter for a Kreg PRS5000 Router Lift to suit a 65mm Router. The fit is very tight to make sure its super secure. Options for Smooth or keyed to a Makita RT0700C. Fusion files included. Print Settings Printer Brand: Creality Printer:…
A simple collar adapter for a Kreg PRS5000 router table to support a 65mm Router like Makita RT0700C Options for smooth or keyed for the RT0700C. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution:…
Magnet gripper for scanning reclaimed wood for nails. Uses 2 magnets from 3.5" HDDs ( 2X 15x3x35mm ) othere there abouts. Use abit of epoxy to secure then and hte plug so that they dont rattle.
* This is still a work in progress * A modified version of NailDRV swivel table for a theatre chair. The mount fits in the cup holder hole.The bearing was inspired by the one by SavageRodent: https://www.thingiverse.com/thing:857359 .…
A 190mm blade shaped bicycle spoke wheel reflector that clips onto a ~1.8mm bicycle spoke. Designed to maximise the relective surface area while still being aerodynamic and looking as good as possible. Requirements 9 or 10mm reflective…
A simple tool rack. Mostly meant for the scrapper but with space for loads of nozzles as to not waste the space. If you have them show them off . Fusion files included Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
A wall mount for a wall mount for a Netcomm Wifi 6 CloudMesh Gateway , a standard router provided by several ISP. Hole Spacing for the screws / Nails in the wall is 123mm ( Same spacing as a TPlink Archer 1200 my last router)
A simple stop for planing wood using a 3/4" table saw style T slot. Best printed on its side for maximum strenght. Best to print 2 and space them on either side of the board for the best stability. Scale the print by a couple of % if you…
A protective cover for a standard Australian power or light switch socket. Designed to protect these sockets while painting. This is a friction fit so may vary depending on yuor printer and your exact socket. Ridge on the part for east…
These are all currently available results.
