Counting matching models…
This model has a few design features and is somewhat WIP. Suggestions welcome, but there are only so many hours in the day to work on this. Features: Deep-pockets a bottom layer - this helps prevent any kind of dropped components from…
WE brand airsoft Glock followers are notorious for breaking - this will replace your broken followers for cheap compared to $3 replacements that break just as easily. Long and short variants for different types of magazines (G17/19 and…
If you are making one of these, consider sending a tip - every dollar helps to create more things like this and encourage more open sourcing of designs. This is a battery cap for the Milwaukee M12 cordless tool battery. The battery has…
Customized version of http://www.thingiverse.com/thing:45117 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=45117 Instructions Using the following options: Knob_Type = 1 Rosette_Offset = 1 Knob_Thickness…
Note : this is not technically a geodesic dome, but I'm not sure what to call the geometry. Face-centered cubic just doesn't have the same ring to it? Materials PVC Pipe: I bought 10x 10' lengths. PETG: Printed out of 1-3kg (honestly…
If you are making one of these, consider sending a tip - every dollar helps to create more things like this and encourage more open sourcing of designs. A friction fit guard ring to put over your speedloader locking button - it also…
Just a quick and simple replacement insert for your existing 18650 battery storage cases. No need to create a new standard, just retrofit your existing cases for 20650s if you need them.
Two different sized corrugated plate static mixers designed for use in 1-1/2" SCH40 PVC pipe. Category: DIY
A quick simple plastic ring that centers a generic 68 mm OD brass wool soldering iron cleaner inside the gridfinity baseplate designed for the Hakko 599B. If you then decide to upgrade to a Hakko 599B, you don't have to reprint the…
Print the model from https://www.thingiverse.com/thing:2927444 and print this adapter. File/adjust if required to test fit the adapter to the stand. Use cyanoacrylate glue and allow it to dry fully. Warning: patience is your friend, if…
These are snap on cheek rest risers for the A&K M249 Mk46 airsoft LMG. The stock AEG doesn't have a sufficiently high cheek rest for any type of optic or sight, so I came up with 2 designs that snap on. The 15mm version has a much tighter…
Designed to fit a 75mm bowl tripod for larger cameras. The purpose of this is not as a substitute for a real 75mm ball made from metal, but as a cheap way of holding up camera sliders or other items, and as a building block for other 75mm…
Features & Notes The endcap brackets have HSW sockets built-in - this allows you to hang small hook objects from the sides if you want. Depending on printer tolerances you may need to glue the brackets into their sockets, or otherwise use…
Just a multipurpose mount for clamps and other things to 5/8" lighting/grip spigot. Instructions Place a 1/4" bolt inside and insert using an arbor press or tighten into place with a nut. Place a nut inside on the side and pull into place…
Phoning in an 11th hour entry to the sharpie contest. Has not been printed yet, but model to be updated once the print has actually completed. Uses 2 M3 heat-set inserts. 1 to secure the foot to the ruler, the other to adjust the…
Two versions created - one where the PSU is centered on the rail, another where the PSU is offset to one side. Print a pair of brackets, and a pair of the DIN rail mounting tabs from…
Finally, something to give to the donation buckets for the misadventures of boomers! Category: Coins & Badges
A printable trigger guard for the printable M79 grenade launcher ( https://www.thingiverse.com/thing:2865236 ). V2 features a slightly larger space for a longer trigger pull (depending on how flexible your trigger print is) Category:…
Finally. I can get paid in exposure! Category: Coins & Badges
Model Info Measuring tools: This is meant to hold a small machinist ruler, a normal sized ruler, a Wiha 61630 folding fiberglass ruler, a Staedler combo triangular ruler. There is also a slot in the back for any flat scales/measuring…
Customized version of http://www.thingiverse.com/thing:44421 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=44421 Instructions Using the following options: sscrewhead = 11.3125 dgrip = 30 hgrip = 10 bevel…
Printing Printing in PETG recommended (not tested in PLA, likely to lose friction fit if left in a hot car). Print with 0.2mm layer height flat on the print bed - there is a slight taper to aid the friction fit. No need to mirror,…
This is a drill guide for the keying posts found on the underside of 60mm arcade buttons. The drill tolerances are deliberately loose to give leeway for drilling error and/or variable manufacturing tolerances. The model assumes 37mm…
A small tool for the purposes of centering a CR80 card in a slot punch tool (link below). This may fit on similar clone versions coming out of China, but it has been designed specifically for this version.…
About the Model The clip is intended to hold the side-shelf securely to the 50mm OD upright pipe for storage and transport. The handlebar support is just ‘strapped onto’ one of the legs for storage. This model has no accommodation for…
A holder for the print-in-place REPO player model
A cap designed for friction-fit with the Reed LM-81LX light meter to protect the translucent optical dome, and to provide a consistent 'zero' reference. Designed to thread the manufacturer provided strap through. Instructions Printed at…
A quick and dirty IP camera mount to attach a Ubiquit Aircam Dome to a standard 5/8" spigot fitting, like a Manfrotto superclamp or lighting stand. Insert a 1/4-20" nut inside the fitting, and use a 1/4-20" bolt to form the clamp.…
These are all currently available results.
