Counting matching models…
Garmin Edge Mounts that goes under the stem cap. Normal version and a Giant OverDrive version. The mount geometry is partial remix from Eric van Helmond. Category: Sport & Outdoors
For removing crank cap. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Category: Tools
Designed to perfectly fit the Polymaker cardboard. I have tried other ones, but they had sloppy fit. My design has ribs so it has a wider range of fits.
This is a remix of the excellent replica model by Nap Bollemeijer. Note that he converted this to metric and rounded to 0.05mm, so it is not to mil-spec. This makes it unsuitable for using to make a real gun, but is a great plastic…
For torquing in certain Shimano CenterLock Disc brake retainer caps. Category: Tools
This is for making a Money Fist using Paracord and 1.25 inch steel balls. Category: Tool Holders & Boxes
Fork of project site: Open-Espresso/gaggiuino-builders: A Gaggia Classic control project using microcontrollers. (github.com) Discuss: Gaggiuino Builders | Facebook You can buy these printed here at www.matter-replicator.com For use with…
For RAM mounts. This is easy to print if you orient the flat spots on the bed. Category: Automotive
I painted this model so you can print it in color on a BambuLabs printer.
You can either print it with support, or split it in half and print each side and then glue the sections. Not for climbing of course. It is plastic. The photo is of one printed at 2x size in eSun PETG. The green and pink one is printed in…
This is the V2 version with the longest run time as four 185x235mm builds so will fit onto most 200x250mm printers. Category: Hobby
For RAM Mounts Category: Mobile Phone
M16x30mm Nut and Bolt Category: Parts
This fits on the inside, so can be printed on the Photon when split. I have had some failures to print when support is not used, and it also worked once. Also see: https://www.thingiverse.com/thing:3379635 Category: 3D Printer Parts
For Metro Super Erecta® shelving and shameless copies like Home Depot HDX wire shelves. Category: Replacement Parts
Print this upside down. When you print the retainer, make sure the tapers on the holes are up. Use 100% infill for the retainer but the main part could be 20% or more. BOM: 1 Frame - $2.71 with 30% infill and $20 per KG. 1 RetainerA -…
Not happy with the capsule kind for my SH-3 20 watt motor stirrer. Accepts up to 14mm magnets up to 10mm tall. Epoxy them in. Category: Tools
This model has internal features that force the slicer to make strong ribs along the string path. I recommend printing with 0.5mm line width, 0.2mm layers, 8 wall perimeters, 20 top and bottom layers, and with a unique top pattern, such…
I challenged my 11-year-old son to model a brick. Then I decided to model one as a printer test for my Anycube Photon. If you can make these clutch together with Legos, then you have a well-calibrated printer. Use the horizontal size…
Remixed into two pieces that can be printed on 5.5 inch LCD SLA resin printers. The dovetail has 0.2mm of clearance. Category: Sport & Outdoors
YAST Yet another speed tower. Category: 3D Printing Tests
I print this sideways and use support so that the mount ends up stronger. Use a 4x10mm metric socket-cap screw. I used PETG because the light gets hot, and PLA will be too soft. ABS should be ok. Category: Sport & Outdoors
Fork of project site: Open-Espresso/gaggiuino-builders: A Gaggia Classic control project using microcontrollers. (github.com) Discuss: Gaggiuino Builders | Facebook You can attach this to the inside of the machine using double-stick tape…
Used for scraping bottom of resin tank. Category: 3D Printer Accessories
You can use this to allow a Rockford/Fosgate 8 inch subwoofer driver to fit into a 2017/2018 Audi Q7, replacing the BOSE driver. The upgraded driver is under $80 and weights twice as much as the BOSE unit, and has more travel. Note that…
Designed these for my 11-year old son's first guitar. I uploaded a blank one also. Category: Music
I originally set out to make a door bumper but then turned it into feet for an appliance (including 3D Printer). You can use it for either. Category: Replacement Parts
Added tripod socket, fake antenna, rounded edges, and strengthened mount.
This is a TFT file created by Steve Nofs of the Facebook group that has the main screen and some other screens converted to work with 3.5 Inch Nextion Discovery LCD. Fork of project site: Open-Espresso/gaggiuino-builders: A Gaggia Classic…
I made a two-sided die to try to get my kids into making and printing their own models. My 11-year-old son, Steven, made the six-sided. Category: Dice
Print this and stick onto PR200 2241 CP112 series 3/4 inch PVC. Quickly pick up foam balls without bending over. Category: Hobby
Anycubic Predator spool holder - works with wider spools and ones with smaller ID than the stock spool holder. Category: 3D Printer Parts
Some Giant Mountain bikes use the OD2 steerer-tube stem diameter. This is 1.25", or 31.8mm. Giant sells stems, but they only go down to 60mm. While I have one on order, I got impatient waiting for it, and so designed this to see what 50mm…
After seeing battery cell layouts here: https://github.com/uavpal/disco-docs/wiki/batteries I searched Thingiverse, and found this: https://www.thingiverse.com/thing:4138533 I wanted some changes such as larger 18.5mm inside diameter and…
My kids call this the Snuffleupagus. You can use 1.5 inch PVC pipe of 0.110 or thinner wall (CL-200 is best, and Schedule-40 won't work for 40+ balls), or 2.0 inch Vacuum line (Home Depot sells it). Or even roll up a very large sheet of…
I am using this to compare Taulman 645 Nylon to Trimmer Line: http://taulman3d.com/645-specifications.html…
This is designed for storing resin in extra vats. This is a snug fit (0.3mm all around), but will fit if your printer is properly calibrated. That said, most printers are not calibrated. You could also scale it up to 100.5 percent or 101…
I made a cover with 8mm more height (this won't fit inside the machine so you may not want to use this cover - use the stock cover). The main box has more room for a dimmer and optocoupler from Amazon that are larger than the ones in the…
Use this to set tension for the FEP on an Anycubic Photon, Zortrax Inkspire, Phrozen Shuffle, Mars, or similar resin printer. Category: 3D Printer Accessories
Photo is a custom version with initials, so ignore the BB, but the files included are for a basic hex-head and initials of Frank Underwood (FU). Print in something sort of flexible, like eSun PET-G. Orient so that the exposed part is up…
When making a Boring Company style (not a) flame thrower, I needed to adapt the left-hand threads of the wand to a Burnz-o-Matic extension hose to use blue cylinders. I tested for leaks using soapy water, and it was leaking all over, so…
Fork of project site: Open-Espresso/gaggiuino-builders: A Gaggia Classic control project using microcontrollers. (github.com) Discuss: Gaggiuino Builders | Facebook You can buy this kit here, but there is a limited number available, so if…
If you have Simplify 3D and a MakerGear M2, here are optimized profiles that have quality without being slow. I recommend the 0.2mm profile most of the time. Turn support on if you need it. Use ABS juice or (I prefer) Elmer's Glue stick…
Category: R/C Vehicles
Enclosed are models with and without the hour meter. I recommend an hour meter unless your printer already tracks hours. Wire it to the fan that is only on when the LCD is on. PLA may be too soft when warm so use PETG, ABS, or print in…
This gives a FoodSaver VP112S a FoodSaver port. You still need the hose. Note that the VP112S will draw an 80% vacuum through this in about 8 seconds, so best to press the stop button after 10 seconds or else you risk cracking some…
Run wires through this and wrap the bare conductors around the two points of contact to the pump. Then connect the other end of the wires to a 1.2-1.5v power source, such as an external AA battery pack. Warning: Most AA battery packs are…
Elegoo Fang 5015 Cooling Duct. https://www.amazon.com/gp/product/B079BPS9Q8/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 Category: 3D Printer Parts
Print at least two of these. Put 15 grams of resin into two or more vats. Let sit level at 20 degrees C. Ensure the entire sheet is coated. Once at stable temp and levelness, quickly put the two or more vats onto the platform. Make…
Planet Bike and CygloLite mounts for Schwinn rack that have 20mm spaced holes. Category: Sport & Outdoors
This fits the AccuGauge and Victor tire pressure gauges, and others that are 2.2 inches OD. If this is too loose, then wrap a layer of electrical tape around gauge first. Category: Automotive
Works with this mic: https://www.amazon.com/gp/product/B0BY6KHWST/
My 12-magnet CAV3 King PAS wheel was too large for my bike, so I made this one and reused the magnets. This one fits my bike with Shimano Ultegra cranks. It may fit your bike. It uses 5mm magnets. Category: Sport & Outdoors
I made this for my Year 2000 DRZ-400S. On the left is a switch for the USB power and LED driving lights. Then there are two USB plugs (you can buy that device on eBay). Then a space for a tach/hour meter. Then a phono plug for a heated…
Note - this is a work in progress. I have not yet seen if the Edison/Explorer will fit. It should. Estimated 48-50 hours of battery life with true 3400+ mAh cells. NOTE: This may not fit the very new 1.3 version of the Explorer board that…
Center this within the slicer for your Anycubic Photon, and then print it. Count the ridges on the sides. There should be 10 of them. The ridges are 0.25mm wide and 0.5mm apart. For each one missing, you are losing 0.25 to 0.50mm of LCD…
Slam your bar/stem and replace those 30mm of spacers with a GoPro mount. Category: Sport & Outdoors
This is 34mm wide at the center tips, and 24mm wide for the part that holds the tape. The tips are 5mm in diameter. The major diameter is 25mm plus the ribs make it 26.5mm.
For mounting a Sony ECMCS3 stereo microphone on a camera hot shoe. Category: Camera
Fan mount for when you want to hang a 40x40mm off another 40x40mm at a 30 degree angle. I use it for an E3D on a MakerGear M2. However, even if I had the stock PEEK extruder, I think cooling the stem will reduce jamming - especially with…
This filament path was designed for reliable feeding and for a v6 E3D. Updated for 2019 to be more rigid and to allow for use of two 3mm brass inserts to put in screw to make hot-end be fixed in place more solidly.…
Print this and see if you have any dead pixels on your display. If you do, you can note where they are and avoid them when layout out files. Category: 3D Printing Tests
Useful for configuring both scale and erode/dilate functions of both FDM and SLA printers. Sections are 10mm, 20mm, 1mm, 2mm, 3mm in both directions. Category: 3D Printing Tests
Enhanced with the following: Changed ID to be a press fit to this collar: http://www.amazon.com/gp/product/B000P0QAG8/ref=oh_details_o05_s00_i00?ie=UTF8&psc=1 Changed "M2" engraving to an arrow pointer to better show orientation. Added…
This extruder is about 211 grams without the part cooling fan but with the extruder cooler. The respective parts on an M2 are about 248 grams. Ideally print in a stiff high-temp material such as car-fiber filled Nylon. PLA will not work.
Put this over your rim, sit on the bike with overly-inflated tires. Have assistant release air from tires until this gauge exactly touches floor. Your tires are now at 15% drop. You will be surprised that you have been using the wrong…
This allows an iPhone6 with UnU battery case to mount on a bike. It is pictured on my road bike with a 130mm stem and a 73 degree steerer angle but should fit some other stems. The slammed version fits on both my rod bike and Giant…
Printing for non-commercial use only. Available professionally manufactured at www.loopcases.com Empty weight: 38g Dimensions: 25Lx42Wx77H mm / 0.98×1.65×3.03″ Replace o-ring with #122 for mid-section and #135 70D to secure top to bottom.…
This is a socket to test media for strength while using a torque-wrench. [I just added a 21mm that works on my lug nuts. I use a low impact driver until it breaks, and then measure the removal torque] To test, print the part (with the…
Camera mount for the MakerGear M2. It snaps onto the right side and should work with most webcams. I use the Logitech HD Pro Webcam C920. You will need one 3/4 inch long 1/4-20 screw. Here is a video from the mounted camera: Category: 3D…
Printrbot Simple 60mm and 80mm Fan Mount This will also give you an extra 5mm on your Z axis. Category: 3D Printer Accessories
For this and similar. https://www.amazon.com/gp/product/B01E3AETM2/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 Category: 3D Printer Accessories
My RECI-brand C02 LASER tube is designed to run at 28 mA. The manufacturer says to keep it at 26 mA if you would like the 10,000 hour life. With my cutter, I could not use 100% power and stay within these limits. In fact, my power has to…
This allows one to install a 12v electric heater. Drill a hole for the power and temp sensor. Note that I have it on the left side, but it also works on the right side. Print this on FDM. I could make it sightly smaller to print on a…
Micro-compact enclosure for RileyLink, a Bluetooth bridge so that an iPhone can talk to a Medtronic insulin pump using the Loop app: https://getrileylink.org/ This enclosure is designed to be as small as possible, and to have the antenna…
The goal is for the TAZ to accept these screws: http://store.makerstoolworks.com/motion/z-axis-lead-screws-and-nuts-set-of-2/ This has not been tested as I don't have the parts yet. You will want to buy 5x6.35mm couplers:…
MakerGear M2 BIQU H2 V2 Extruder Mount and Klipper config file. Note that this will limit the X-axis to 188mm of usable space, and the Z to 185mm. I will probably change the part fan to be like the Ender 3 S1-Pro type. Category: 3D…
I am setting up a farm with some 1+ machines that were missing build plates. Don't use ABS. Uses PLA or PETG.Make sure your printer doesn't print over-size as this is a close fit (about 0.2mm clearance for bolt head, and 0.25mm for…
This is a case for a common OpenAPS implementation by Robert Silvers and Eric Burt. If you want a pro-quality print made by me on a lithography machine from carefully-selected ultra-strong plastic, you can order from my store. I spent an…
The Simple can benefit from having less moving mass. McMaster parts needed: 52335K32 Metric Extreme-Temperature Tubing Made with PTFE, 2 mm ID, 4 mm OD, 1 mm Wall, Semi-Clear White. $2.45 Per Foot (two or more feet required). 5449K171…
This is a case for a common smaller OpenAPS implementation. NOTE: This may not fit the very new 1.3 version of the Explorer board that is shipping in July/August because they made the board 0.85mm thicker. Dimensions: 65x51x21mm for 2500…
Use two cable-ties to mount your Dexcom G4 Continuous Glucose Monitor on your bike's handlebars. Category: Sport & Outdoors
I needed a way to cool PLA with my E3D v6 and MakerGear M2. There were lots of mounts already, but none of them did what I want, or were overly large (heavy) and complex. Any mount that splits the hot-end heat-sink fan output is a no-go…
This is JohnSL's Y-Axis Sag Fix with the following changes: I added about 1/8" of material around all edges to make it stronger so that it would not break when you remove it from the built plate. I reduced the radius of the clearance cut…
This is a case for a common OpenAPS implementation. NOTE: This may not fit the very new 1.3 version of the Explorer board that is shipping in July/August because they made the board 0.85mm thicker. I have come to realize that the wireless…
These are all currently available results.
