Counting matching models…
Excellent Design. No threads to match and a built-in funnel - BRILLIANT !! Check out the original designer's in depth description. https://www.thingiverse.com/thing:2892179
Description Needed to organise my collection of resistors. Couldn't find anything suitable so created this one. Features ; 24 drawers, each with 7 compartments. This suits the full E24 series of resistors (from 0.1 Ohm through to 9.1…
When the original filter is oriented on the build plate so that the internal 20mm (1/2") thread is upmost, there is an overhang which required support which would end up internal to the filter. I have simply created an angle within the…
This is yet another mitre / miter box but with a unique difference! It is designed to hold and clamp 25mm x 11mm window fly screen frames to allow for easy accurate cutting of the required 45 degree angles. I designed it with two guided…
I love the original model of this tool. I have added three enhancements to hopefully improve functionality. Unfortunately I have not very good with F360 so I have only added the modifications to my settings for 20mm PVC conduit. Maybe…
I bought a cheap set of heat-set nut inserts from Aliexpress that came with the soldering iron and a set of 7 brass bits . As this iron is only going to be used for the inserts I needed a secure way of storing all the pieces together. The…
All credit to the original designer. I made his version but Thingiverse wouldn't allow .3mf file upload for BambuLab P1S to assist others readily impolementing a change of infill for the uppermost part of the model to enhance strength.…
Remix to increased the hole size to accommodate 6mm dia x 1.75mm magnets. A total of 12 magnets used per pair of joiners. To be sure, magnets had a dab of cyanoacrylate (superglue) added prior to careful insertion and imbedding using…
I love the original creation but am not skilled enough to modify the OpenSCAD file to generate external flap pins instead of needing the metal axles. The uploaded files shows the post processed modifications using Fusion360, in particular…
Rather than using the dubious keyhole slot on the rear of the charger to attach the charger to a wall I decided to create a wall mount cradle. This cradle allows the charger to be easily and securely slid into place on the wall. The slot…
Needed an attachment to the rear outlet of my P1S to adapt to my magnetic fume extraction system but couldn't find any existing design that encompassed my needs. Remixed two existing designs and incorporated my own magnet layout so that I…
This is a simple tool to allow easy alignment of a metal number/letter stamp. It magnetically grips the steel punch allowing one to align the character position with one hand and safely hit the punch with the “percussive instrument” the…
I needed an outdoor enclosure for my aquaponics pump timer/controller using a simple Sonoff Basic. This slim case suits 20mm conduit fittings allowing me to insert the timer/controller inline with the existing 20mm plastic conduit. There…
Made a trophy for my son who saved 9 ducklings from a storm-water drain. Thanks to willie for the Duck model and MotivatedTea for the pedestal SCAD design
Disclaimer If you are not confident with tackling mains powered projects seek professional advice. I am not liable for any issues that may arise from incompetent or unauthorized wiring practices! Fan The fan was purchased from Aliexpress…
Rather than using the dubious keyhole slot on the rear of the charger to attach the charger to a wall I decided to create a wall mount cradle. This cradle allows the charger to be easily and securely slid into place on the wall. The slot…
Replacement dust cap for camping gas bottle. The original died after 30 years! Printed with flexible TPU
This is a replacement gutter spout designed to catch storm water runoff from my greenhouse roof and feeding it into 20mm polypipe via an integral 90 degree bend. A mirror image is required if (when) the other end of the gutter needs…
Replacement knobs for Jackaroo brand gas camping cooktop model 1307D. I'm sure these knobs would fit many other brands too. The original knob used a metal spring clip to secure the knob to the “D” shaped shaft. Obviously this was…
Tired of having to dig for your drill chuck key in the bottom of your toolbox? Here is the perfect solution. Attach this flexible strap to the power cord of your corded portable drill and the chuck key will always be right with you. As a…
I needed a similar caliper mount to that by Stelzenbach on Printables and Practical 3d Prints on Makerworld so I created this one based on these. Two main differences being; 1. I have two calipers, one metal with 2 decimal place readout…
Enclosing two SLA AGM rechargeable lead acid batteries in a tight battery box for my solar power supply required protecting the exposed battery terminals to avoid the potentially dangerous condition of an accidental short circuit. The…
Introduction Local Councils supply biodegradable dog poo bags at selected locations where I live. To make these bags readily available whilst on a walk (Oh no, I used the W word - I hope your dog can't read) I designed this refillable…
Needed a simple radius gauge. Based on the original version, I decided to inlay the numerals in a contrasting colour along with arrows for clarity. Printed on Bambulab P1S with generic PETG.
This is a complete redesign of a modified mount for a bicycle reflector that provides a hidden and secure compartment for an Apple AirTag. This design is similar in appearance to that designed by yba2cuo3_12119…
Theses are jigs to allow accurate 3.5mm holes to be drilled in the edge of various plastic filament spools to allow the use of just one type of filament clip. The best clip I have found is the one designed for a Bambu Labs spool by…
My Mitsubishi Eclipse Cross PHEV lacks a 12v outlet in the boot so I made one that doesn't compromise the warranty. It is basically an extension from the DC outlet in the rear passenger area to the boot with a bespoke mount that is a snug…
Whilst servicing this ~ 15 year old range-hood I noticed the plastic end caps/pieces of the pull-out shelf thingy (that's the technical term) were cracked and coming apart. A short time later I had 3D printed replacement parts which I…
My articulating desklamp is designed to be clamped to the (rear) horizontal desktop surface. This arrangement does not suit my arrangement as my desk abuts a wall so there is no clearance for the clamp. I need to attach the lamp to the…
Slip these jigs onto the 3mm stainless steel wire and slide it into the holes where the wire enters the wooden balustrade upright then paint the upright without getting paint on the wire. Printed with minimal infill in PLA (using the…
These are all currently available results.
