1 / 4
100mm Magnetic Duct Joiner
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic joiner for two 100mm ducts using 6 of 6mmx1.75mm magnets
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 60
- Makes
- 0
- Views
- 336
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix to increased the hole size to accommodate 6mm dia x 1.75mm magnets. A total of 12 magnets used per pair of joiners.
To be sure, magnets had a dab of cyanoacrylate (superglue) added prior to careful insertion and imbedding using vice-grip pliers.
Attach the flexible ducting to each joiner using cable ties.
Magnetic force is quite strong so to part joint you need to twist by a few degrees.