Counting matching models…
This is a strong and light Tiny Whoop style (25.5 x 25.5 mounting) canopy specifically deigned to accept: HDZero - Nano camera (also other 14mm nano style cameras) Happymodel - ELRS PP / EP2 receivers (the RX fits behind the camera on a…
Gimbal designed for Betaflight / iNav / DIY drones. See - https://youtube.com/shorts/iXlkazI-BYA Updated to include a locking pin so that the pivot and housing lock together more easily. Intended to be light weight and durable, a thrust…
Intended to fit a standard UK garden hose connector - 3/4 BSP thread A rubber o'ring - OD 16mm x 2mm diameter (should work) this must be fitted or the part will leak. Category: Household
Enclosure for 3D printer electronics. I made this case for use with a custom CoreXY printer to hold the MCU, electronics and screen. It holds: BTT Octopus Pro PSU (slim) Raspberry Pi Raspberry Pi screen (7" official Pi touchscreen) SSR &…
Five33 Switchback Zero - HDZero Nano 90 camera mount Similar to the Five33 stock camera mount for Switchback Zero. Works with the HDZero nano 90 + upgraded M8 lens (1.8mm FOV D:150° H:125V:75°) To be printed in TPU The mount provides a…
Tiny trainer V2 - battery mount Similar to the original but designed to take a longer battery GNB 720mAh 3S 100C LiHV Battery which is 71mm long and GNB 520 HV. To be printed in TPU. Versions: 71x20 - this fits both GNB 720mAh 3S 100C…
Ratrig V-Core 3.1 - Enclosure V2 - LED mounts Version included for: 300mm - 18 LEDs 500mm - 24 LEDs To be mounted on the inside of the top 3030s of the V2 enclosure facing down on the left and right sides - as pictured. The LEDs are…
TinyTrainer V2 - Tail mount The tail includes mounting for: Lollypop style antenna - versions for TBS Triumph Pro (15.2mm) and TrueRC Singularity (12.5mm) XT30 battery connector Happymodel ELRS dipole antenna To be printed in TPU. Fit the…
Tiny whoop / Micro canopy - intended to fit HD Zero - Nano Lite camera Camera angle is adjustable. Mount for the VTX antenna (the type that is included with the HD zero whoop lite bundle) - approx. 4mm diameter dipole antenna. To be…
Toothpick / micro canopy, this is a light, strong and versatile canopy - 25.5 x 25.5 mounting points. The canopy houses components: HDZero nano HD camera New Sport version - (Canopy2021sport.3mf) lower profile canopy, improved mount for…
"TinyTank" This is a prototype monocoque 4S 3 inch racing / freestyle quadcopter design with all the components (FC, VTX, wires, battery etc.) fitted internally. Hardware - M2 countersunk bolts (x4) & M2 nylon nuts (x4) The FC and VTX are…
Articulated web-cam mount for logitech C270 or C920 to mount to a 3030 extrusion. Originally designed to fit the Ratrig V-Core 3 but it would be suitable for mounting to 3030 extrusion or to any flat surface. C270 - mounts directly to the…
Belling cooker knobs These designs are similar in almost all regards to the original Belling parts: 444445412 444445413 1000DF 444445410 444445411 444445412 444445413 I have included two versions - over and hob control knobs The originals…
FPV camera adapter 19mm to 26mm. Originally designed to fit the Shark Byte 19mm upgraded camera body (not my design but included as an STL), the original can be found here -…
Five33 Switchback Zero - HDZero Micro V2 camera mount This is a replica of the stock camera mount supplied as part of the Five33 TPU kit with the Switchback Zero. I was unable to find the same part on the Five33 website or their…
Not a glamorous item but when you need one of these then this might help. Replacement toilet cistern internal lever arm. This lever arm's special feature is a 25mm dog leg (switchable left or right) and could also be used for normal…
Tiny Trainer V2 - RX mount for EP1 or similar To be printed in TPU. Fits to the frame at the front between the camera and stack. Category: R/C Vehicles
These adapters are intended to help home brewers with cleaning beer lines or purging gas lines. The spay_bottle_adapter is intended to be screwed onto the end of a spay bottle such as:…
Toothpick style canopy deigned to accept: HDZero - Nano camera RX - ELRS PP / EP2 receivers (the RX fits behind the camera on a tray - glue in place) VTX antenna - friction fit or glue This version of the canopy is intended for use with…
Quality Li-ion battery holder - two sizes 18650 - Battery holders - several sizes 18350 - this size is ideal for the Radiomaster Zorro TX To be printed in TPU Top part intended to show if the batteries are CHARGED or EMPTY which is handy…
Honda Izy lawnmower - wheel bush - flanged Size 13mm (ID) x 27mm (OD) x 20mm deep These replacement bushes are an upgrade on the original parts. The bushings on my old Honda lawnmower all failed. I found it difficult to find replacements…
PLEASE SEE VERSION 2 of this design - https://www.printables.com/model/540419-provolver-protube-mount ProVolver VR gun mount - prototype left & right handed versions These part are intended to mount a ProVolver VR gun / pistol to a…
Modular design: Left Middle (optional) Right For a longer drip tray use additional "middle" sections for a shorter tray leave out the middle section. Add magnets and rubber feet in the spaces provided to ensure that the trays stay in…
ProVolver VR gunstock / haptic pistol (aka forcetube / protube) mount for fitting the ProVolver to a standard Protube gun stock. This is V2 of the mount, which is designed to fit a standard protube / forcetube mag mount setup. The benefit…
Armattan Tadpole parts Part 1 - 25.5 x 25.5 stack top Designed to fit HDZero - whoop board With mounting space for Happymodel ELRS - PP / EP2 Material - ABS V1 is the same as V2 other than enabling the HDZero board to fitter at 90 degrees…
BMW S1000RR Hepco & Becker sportrack mounting clip (2019 - 2022) Unfortunately the sportsrack mounting requires the bracket to be bolted to the rear subframe which whilst secure is inconvenient. This bracket bolts to the underside of the…
Tiny whoop / Toothpick style battery mount can easily be used for 1S / 2S / 3S batteries by swapping the TPU band for different sizes. The mount consists of two parts (ABS / PLA / resin / preferably carbon fibre nylon) base plates to…
This is a strap buckle intended to replace the poorly designed OrqaFPV goggle strap buckle which in my case broke along with other problems with these goggles. There a five parts for each buckle: 2 x Pins Stainless Steel 2mm X 40mm -…
If like me you upgrade a VC 3.1 with VC 4.0 using coreXY / hybrid parts (supplied by Funssor) then following may help. Included are modified Ratrig part designed for converting a V-Core 3 / 3.1 X carraige to be used with a V-Core 4 motion…
Injects O2 from an oxygen concentrator machine into brewing wort, this is achieved by passing gas into a stream of wort during transfer which is agitated by an aerator built into the gas injector part. Demo video -…
These are all currently available results.
