Counting matching models…
Made to fit a 40mm vacuum hose to an unmodified Hose Fitting from @PeterH's “Camlock Connectors with Magnetic Catch”. At the fitting side it screws in easily, at the hose side it is a bit more snug. If it is too snug, use the Offset Face…
Converter for M22 water faucet to G3/4 garden hose connector. Use teflon tape for a better seal. I printed this in PLA, but PETG is recommended if you plan to run hot water through it. Print Settings Printer Brand: Prusa Printer: i3 MK3…
Made to fit a 40mm OD vacuum hose, which threads in quite snugly. If it is too snug, use the Offset Face feature in Fusion 360 on the inside of the thread/coil. STEP file is found below. Note that these hoses have a reversed thread so you…
This model is designed to be printed in parts and screw together to make the whole assembly. The screw is split in half lengtwise. The weak point caused by the layer orientation is avoided this way and we gain the maximum strength…
This is a remix of blackholesun_445's toolbox handle. I edited the STL file to make it a little easier to print (I had trouble with the overhang angles). See the 3MF file for the orientation in which to print, or use it to generate gcode…
Converter for G3/4 garden hose to M22 water faucet connector. Use teflon tape for a better seal. I printed this in PLA, but PETG is recommended if you plan to run hot water through it. 0.10mm layer height recommended for a better seal,…
A part to center your MGN9 linear rail on your 1515 extrusion. Print in whatever material with whatever settings really.
A parametric pill box design, made because I needed a certain size to fit big/many pills. A little protrusion on the lid acts a stopper so the lid won't slide open by itself but also does not require Hulk finger strength to open. The…
I made this to micro-manage the cables in my Voron 0 build. Can also be used for any other project using 1515 extrusions of course. Dimensions do not exceed 15mm so it won't stick out past the edge of the extrusions. Meant for use with…
Remix of AirTag Cat Collar Clip by @LyndonBlack_332077. I made some small fixes to make it print a little cleaner, mainly by removing some problematic overhangs. The 3MF file is for a Prusa MK3S using the “Generic FLEX” profile, but also…
Handle made to mount on 2020 extrusion and fit larger hands
A corner cube to join three 1515 extrusions together with M3 BHCS screws. Be aware that this joint is only as strong as your layer adhesion, so don't use it in high-force situations (or at your own risk). Print with 0.2mm layer height,…
Made to fit my Makita DJV182 jig saw, which has a 23mm ID connection to attach it to a shop vac. The 23mm OD side of the connector tapers to one side of the connector to allow clearance between the Camlock Connector and your worksurface.…
A way to mount 3 AliExpress knockoff Wago's, a 3010 bed fan, and some MicroFit 3.0 connectors. And some optional cable management. The design is not an actual remix but inspired by Driftrotor's work (see remix section). Technically it…
Threaded closure cap with M27x2 thread. I used this to close off an unused water tap that kept leaking. Used teflon tape between the threads for a better seal. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…
Display mount for PanelDue 7i on 2040 extrusion. Cover is a remix of the original Prusa LCD cover, the lcd support brackets are remixed from the Prusa Bear design. LCD-cover-prusa-PanelDue7i: check the STEP file if the mounting holes line…
Made as an alternative to the stock 3030 fan mount. This one is just one printed part and needs only half the screws and heatset inserts. Props to the ZeroPanels design for creating the snap-in geometry and to Blamm for giving me the idea…
I designed a simple planter shaped like the green pipe from the famous Italian plumbing game. It is printed in parts so you don't have to worry about overhangs or bridges. The pieces can easily be glued with a little superglue or,…
If, like me, you don't have an ECAS04 collet and are to cheap/impatient to order it and you do have a M6 push fitting, this is the model for you. Print this like you would the regular model and the other printer parts, no special settings…
A model to mount an antenna to your Voron 0. I used a Duet 3 Mini 5+ in my build and needed a place to mount the antenna. I did not want to add a fragile part sticking out of the printer, so this model is made to fit the antenna inside…
A solution for a very specific situation; I have a Fysetc CNC'd bed mount frame and will not be using a cable chain for my bed wires. This cap is designed to perfectly fit and mount to the side of the bed frame so the wires from under the…
Alternative to the clamped antenna mount I made before, which was based on the Voron 3030 electronics fan mount. This combines the antenna geometry with the snap-in geometry of the ZeroPanels.
The fit of this model is very tight and slightly slanted to exactly fit this model of pot. Use with other pots at your own risk. The diameter at the bottom is 55mm. Print settings and material don't matter much. The model has been…
Over 20 years ago I grew up with many of these old IKEA desk lamps throughout every room in my parent's house. After all these years the polycarbonate housings started to easily crack at the base with every movement. I still have one in…
My entry for the Bondtech Spinning Top Design Contest 2024. It consists of a top, bottom, and a shaft/handle/tip. If you print this check your tolerances, it might be a tight fit (0.1mm). Depending on the PLA brand/color you print this…
For the Wahl “ STAINLESS STEEL ATTACHMENT COMB SET FOR 5-IN-1 BLADES ”. Designed to be printed upright in vase mode, using 0.8mm extrusion width (you can do this with a regular 0.4mm nozzle). I included the .3MF file with the settings for…
- See @Kevin_83794 's model description for details about the PTFE tube. - In my remix you still need to drill out the screw holes, but with a 2mm drill. - You can use the existing holes in the Dragon heatsink without drilling them out. -…
My second entry for the Bondtech Spinning Top Design Contest 2024. The design has changed into a unibody single-piece object. No assembly required. It is meant to be spun by a offbrand dremel tool. Depending on the PLA brand/color you…
These are all currently available results.
