Counting matching models…
UPDATE 25/04/2024: Added a second version with wide stream - useful for covering bigger area This is yet another adapter cap that screws onto any regular PET bottle (that has PCO28 thread) so that it can be used as a watering spout -…
This is a storage bin which looks like a frog sitting with its mouth wide open. You can store practically anything there if it doesn't need to be covered. Candies, failed 3D prints, stationery - you name it! You can even use it as a…
UPDATE 8/10/2025: strengthened wings This is a reverse-engineered remix of popular “Cascade card wallet V2” by @Hugo. My version is slimmer (7.7 mm vs 11.5 mm), but fits only 3 cards. It also incorporates spring placement from…
UPDATE : @JesseSchauer_545466 designed an adapter for newer 4100 models - https://www.printables.com/model/924901-sonicare-4100-case-adapter . Give it a try if you have one of those toothbrushes. It's a case for Philips Sonicare electric…
This is a holder for napkins (or anything, really) in a form of a scallop seashell created from a 3D scan made by iuferky . Can also be used as a stylish marine-themed decoration piece. In its default size, this is best suited for…
A fancy egg holder. Eat like an emperor. (egg is not included)
UPDATE 05/08/2025: added a variant for 11/12 speed chains (thanks @GrzegorzZ) UPDATE 28/07/2025: after further testing and reviews the model geometry was updated to avoid wicking lube to the sides This is an applicator for Squirt Chain…
A bicycle handlebar extension to mount front light (or other handlebar-mounted accessory) when it's not possible to do so on the handlebar itself. Designed to fit 32mm or 22mm handlebars (parts are named accordingly). Files named “arm_”…
A box for compact discs (CD, DVD, BluRay or anything that has the same dimensions, really). Its dimensions are 135x135x15 cm. It has no moving parts (all hinges are compliant) and prints as a single piece. It is optimized to be printed…
This is a USB cable guard for Sony PlayStation 5 DualSense that clips onto the controller. It is designed to hold original PlayStation 5 USB Type C cable firmly when it's connected to the DualSense. This removes strain from USB port and…
This is a USB cable guard for Sony PlayStation Dualshock 4 that clips onto the controller. It is designed to hold original PlayStation 4 microUSB cable firmly when it's connected to Dualshock 4. This removes strain from microUSB port and…
A handle for t-shank jigsaw blades. Has ergonomic shape with finger rests. Does not require any additional hardware - all necessary pieces are easily printable without supports (do not change the model orientation). Using 0.8 mm width for…
A lens hood for Canon RF 100-400mm F5.6-8 IS USM. It's length is 60 mm, and it has an integrated deflection spring lock to prevent it from detaching from the lens. Allows for usage of original lens cap. For best print quality, I advice…
This is a simple card holder for Wingspan board game that uses printbed, game box and table space efficiently. It can hold twice as many cards as original vacuum formed holder while occupying the same volume in the box. While 2 halves of…
This is a “will return at" sign with an analogue clock face to inform visitors when you'll return (e.g. to your work place). Also known as “return sign”, “back soon sign” or “be back note". It can be placed on a horizontal plane such as…
This is a press mould for onigiri rice balls. It has a convenient shape with a handle that doubles as a filling hole press. Models can be scaled if needed to produce onigiris of different size. Usage process photos are included. WARNING :…
This is a koozie cover for 330 ml & 500 ml aluminum drink cans. There are 3 versions for common can types: “Standard 330 ml” (66 mm diameter, 146 mm height) “Sleek 330 ml” (58 mm diameter, 115 mm height) “Standard 500 ml” (66 mm diameter,…
A lens hood for Canon RF 50mm F1.8. It's length is 36 mm, and it has an integrated deflection spring lock to prevent it from detaching from the lens. Allows for usage of original lens cap or, alternatively, a 72 mm one on the front of the…
This is a set of 3 christmas tree ornaments in a shape of a candy (sweet) in a wrapper. The difference is in the pattern: ribbed, striped or swirly. For best appearance, use new “Fuzzy Skin Painting” tool from PrusaSlicer 2.9.0 to paint…
A plumbing plunger in three sizes with a compact screw-in handle. Useful for cleaning blockages and clogs in all sorts of sinks and drains. Approximate base diameter: S - 100mm M - 125mm L - 150mm Every part is optimized to be easily…
CHECK OUT IMPROVED V2 - https://www.printables.com/model/1092246-small-garden-shovel-v2 A small garden shovel (so called trowel) - a tool useful for gardening. The model is optimized for ease of printing and ease of use - there are no…
This is a holder for Börner (Borner) V3 mandoline slicer and its accessories. It securely holds the main plate (held in place using integrated spring lock) with slice insert plate installed, two julienne insert plates (3.5 and 7 mm) and…
A hollow christmas tree ornament bauble with an interesting pattern. Easily printable thanks to integrated stabilizing fins (should be broken off after the print is done) and no extreme overhangs. To hang the ornament there's a separate…
A small garden shovel (so called trowel) - a tool useful for gardening. Has the same nice thick handle as V1, but its orientation is improved now so that it's easier to dig deeper. Prints easily without supports.
This is yet another calibration cube. It has a cutout inside which there's a pillar with 3 bridges going in different directions. It helps to check for the following things: dimensions (20x20x20 mm) ghosting/ringing on debossed/embossed…
A hollow christmas tree ornament bauble with an interesting pattern. Easily printable thanks to integrated stabilizing fins (should be broken off after the print is done) and no extreme overhangs. This is an even twistier version of the…
Several holders for Dyson cordless vacuum accessories (suits V7, V8, V10 and V11 series as they all seem to have the same mounting system). All models are designed to be printed without supports. While "block"_4" and “on_tube_block_2” are…
UPDATE 27/05/26 : added 5 sheet version (on request of @Stsfin_4937) This is a storage solution for three Prusa printbed sheets (which measure about 241.5x254.5 mm) for the underside of an IKEA LACK table (works even with a smaller…
This is a set of game item holders (card and resource cube organizers, player boards) for TRAILS board game. It was designed to neatly fit into the original game box space. Card holders have cutouts so that it's possible to easily grab…
A lens hood for Canon RF 15-30mm F4.5-6.3 IS STM. Has shape optimized for covering everything just outside the field of view of the lens on its short end. It's length is 34 mm, and it has an integrated deflection spring lock to prevent it…
This is a sequential shifter addon for Thrustmaster T150 wheel which uses L3 and R3 buttons on the wheel's base for operation. It's a purely mechanical solution - no soldering (at all) or modifications (almost) needed. Some additional…
A storage for hex bits in a form of a jaw. Hinge is print-in-place with 0.2 XY clearance. I'd advise a test print of the upper part only if you're unsure whether XY compensation is needed to preprly print it. Requires 32 5x2mm magnets…
@js500 designed a great set of inserts to pack the base game and both expansions neatly into the base game box, but I personally found some things that can be improved (mainly, the lack of fillets) - so I made them.
A part that connect earcups to the headband is prone to cracking so I decided to model a replacement. It consists of two parts (main one and small second half for earcup grip) and uses the same two screws that held original parts…
This is a jar container in style of bamboo stalk. Has lid with threads for secure fit. For printing I advise using wood-filled filament and painting it afterwards with wood stain for the best look.
This is an ergonomic grip for GVDA GD300 soldering iron. In addition to providing a comfortable grip and better thermal insulation, it kind of acts as a stand by preventing the soldering iron tip from contacting the surface where it's…
It is a pouch for hex keys (also known as allen keys) from Prusa printer kits. Contains 6 holes of precise size for each key (2 x 1.5, 1 x 2, 2 x 2.5, 1 x 3). It is compact and protects the keys from damage allowing them to be stored…
A custom knob in the form of an ice cream cone for Thrustmaster TH8S shifter. Based on the official adapter files provided by @Thrustmaster. Easily printable without supports and multicolor systems. Both parts are already placed in the…
A custom knob with an eject button hidden under a secret cap for the Thrustmaster TH8S shifter (like a certain secret agent had in several famous films). Based on the official adapter files provided by @Thrustmaster. Designed to be…
A custom knob in the form of a classic rubber ducky for the Thrustmaster TH8S shifter. Based on the official adapter files provided by @Thrustmaster. Designed to be assembled easily without any additional tools or glue, using snap-fitting…
A custom knob in the form of a lollipop for Thrustmaster TH8S shifter. Based on the official adapter files provided by @Thrustmaster. 3 different sizes are available: S - 55mm in diameter M - 60mm in diameter L - 65mm in diameter Easily…
A custom knob in the form of a stallion bust (alternatively, a knight chess piece) for the Thrustmaster TH8S shifter. Based on the official adapter files provided by @Thrustmaster. Easily printable without supports.
These are all currently available results.
