Counting matching models…
Migrating from thingiverse https://www.thingiverse.com/thing:3847747 Around half the size of a 1kg filament box, print two and it will be the same size as the filament box (at least the same size as the one that i use) 20.5 X 10.5 X 2 cm…
Migrating from thingiverse https://www.thingiverse.com/thing:4362301 Original here https://www.thingiverse.com/thing:3797754 at that size, the original were quite weak and breaking easily, remix it to make the wall stronger. compared to…
Migrating from thingiverse https://www.thingiverse.com/thing:3987193 keeps the sauce bottle upside down. useful when it's nearly finish. Tested on the MasterFoods 500ml and 275ml bottles. FreeCAD 0.18 file included
Migrating from thingiverse https://www.thingiverse.com/thing:4362267 Remix the large one to be able to hold thicker devices, especially the ones with a case on. Original here https://www.thingiverse.com/thing:3146835 gap for the devices…
Migrating from thingiverse https://www.thingiverse.com/thing:4281713 Adjustable Strap Elastic band Adjuster - 12mm good for face mask e.g https://www.thingiverse.com/thing:4281750 FreeCad 0.18 design file included
Migrating from thingiverse https://www.thingiverse.com/thing:3989346 the blanking plate in my breakerbox / switchboard / meter box was getting old, and breaking apart. design this replacement for them, the default Switchboard Breakerboard…
Migrating from thingiverse https://www.thingiverse.com/thing:4362313 Original here https://www.thingiverse.com/thing:3797754 Added the retaining tab to prevent it from sliding out. happens when trowing large amount of water. especially…
Ubiquity Unifi Door Access UA-G2-PRO UA-G3-PRO 30 and 45 degrees Angle. picture are of the 45 deegress was for the ver1.0 where the mounting holes are a bit off and Wall mounting was too big (used radius instead of diameter). should be…
Migrating from thingiverse https://www.thingiverse.com/thing:3831715 This is to prevent the filament from going over the spool and getting tangled between the holder and the frame. as per picture. Not a remix, more of an accessory for the…
Migrating from thingiverse https://www.thingiverse.com/thing:4411669 Anti draft BackDraft stopper Adaptor for a 250mm Ceiling Extractor Clipsal AirFlow CE250 easily removable/swapable with the 150mm flexible duck Adaptor to remove Solder…
Migrating from thingiverse https://www.thingiverse.com/thing:4905663 Aquaillumination AI Prime Aluminium Mount Clamp Replacement The Original ones broke, design a replacement for it. still using the original M8 plastic screw. 8mm, to use…
Migrating from thingiverse https://www.thingiverse.com/thing:3952249 This is basically the OEM Fanduct with the additional mounting holes. i quite like the fanduct from siteswapjuggler with the additional mounting hole, but looks like it…
Migrating from thingiverse https://www.thingiverse.com/thing:3807893 Remix of dcgoalie98's Direct Drive Bracket, which is a remix Remix of Lujes' Direct Drive Bracket https://www.thingiverse.com/thing:3767702…
Migrating from thingiverse. new upload are not showing up anymore in thingiverse. https://www.thingiverse.com/thing:5432121 Holder was made for the Razer Barracuda X Headset, but it might work for others too. Wanted a holder that conforms…
Migrating from thingiverse https://www.thingiverse.com/thing:3831947 Filament Type Name Color Sample Swatch Tag Just so that i don't have to look though the storage boxes to know what color of what material i have. if printing at 0.2mm…
Migrating from thingiverse https://www.thingiverse.com/thing:3857300 My Daughter did not want a name tag attached to the handle..... sigh.... designed this to fit in the hinge of the Thermos FUNtainer 12oz 355ml bottle, Might also fit the…
Migrating from thingiverse https://www.thingiverse.com/thing:4378817 The retaining clips that hold the part which lift the rubber valve to allow water to go down broke. They do not sell the replacement parts at the local hardware store,…
Migrating from thingiverse https://www.thingiverse.com/thing:3834064 remix of https://www.thingiverse.com/thing:3145530 FreeCad was complaining about errors in the mesh, used blender to partially fix it, and finalized the fix in freecad.…
Migrating from thingiverse https://www.thingiverse.com/thing:4005366 Garmin vivosport watch strap holder loop ring printed in flexible material (TPU 95A) FreeCAD 0.18 file included flexible material (TPU 95A)
Migrating from thingiverse https://www.thingiverse.com/thing:4387788 Adapter to connect a removable 150mm flexible duck to a 250mm Ceiling Extractor to remove Solder / Flux fume. designed to be printed on a CR-10S PRO , so a 300X300 bed…
Migrating from thingiverse https://www.thingiverse.com/thing:4966148 Ubiquity Unifi Door Access UA-PRO 45 degrees left Angle. picture are of the ver1.0 where the mounting holes are a bit off. should be fix in the v1.0b i did not click in…
Migrating from thingiverse https://www.thingiverse.com/thing:3980507 This is a Mount for bigtreetech SKR PRO V1.1 / SKR V1.3 board and Ribbon Cable Breakout PCB Board, for the Creality CR-10S Pro. Mount was design from scratch, Fan and…
Migrating from thingiverse https://www.thingiverse.com/thing:4002862 Sensibo Sky Desktop Holder Cradle it is to remote control your aircon The cutout for the temp sensor was too low in those pictures, this has already been fixed in the…
Migrating from thingiverse https://www.thingiverse.com/thing:4600837 Arkon Phone Tablet Mount Slim-Grip Legs SM688 SM060-2 11.5mm wide, glued 1.5mm thick rubber on top. (30mm X 9mm) SM060-2…
Migrating from thingiverse https://www.thingiverse.com/thing:4574749 Flexible Fume Exhaust Bamboo Pipe OD75 ID68 Bracket and adapter to connect to a 150mm Duct i got the Black, 1.4M, with square hood.…
https://www.thingiverse.com/thing:4362240 The power meter is basically an exposed pcb, although it is covered with Solder Mask, decided to make a case for it, just to be on the safe side. i bought my Usb Type-C power meter off ebay, but…
Migrating from thingiverse https://www.thingiverse.com/thing:4281750 The Face Mask Template Pattern are directly from https://www.craftpassion.com/face-mask-sewing-pattern/ i did not design the pattern, i merely converted the pdf pattern…
Migrating from thingiverse https://www.thingiverse.com/thing:3960641 the rear OEM Floor mat keeps sliding forward over time and was getting quite annoying. design this clip to prevent the mat from sliding. the one that i am using, and i…
Migrating from thingiverse https://www.thingiverse.com/thing:4581821 Q-Scope QS.80200-P Lens Cover USB Microscope FreeCAD design file indluded
Migrating from thingiverse https://www.thingiverse.com/thing:3859283 remix to fit the Micro Swiss heater block original here https://www.thingiverse.com/thing:3435841 block the air from the hot end fan to go to the bed/print. One M3x8…
Migrating from thingiverse https://www.thingiverse.com/thing:3831884 Handle for a generic small slow cooker. the one that came with it broke into pieces. more like crumbled into pieces. slow cooker has a diameter of 21.5cm mounting holes…
Migrating from thingiverse https://www.thingiverse.com/thing:4009248 Auto Feeder Guide Resun AF-2009D AI Prime HD Aluminium Mount when mounting the Resun AF-2009D on top of the AI Prime HD light Aluminium Mount, the auto feeder does not…
Migrating from thingiverse https://www.thingiverse.com/thing:4391619 Thermos 18oz 530ml bottle Name Tag Model HS4010FMAUS https://www.thermos.com.au/product_details.aspx?ProdID=2552&CatCode=HYDR…
Migrating from thingiverse https://www.thingiverse.com/thing:4406335 Rpi Dead Man Alarm (RDMA) Raspberry Pi Hat Case Case for rpi-dead-man-alarm Raspberry Pi hat Occupancy Monitor Use case: for a 24/7 control center with only one person…
These are all currently available results.
