Counting matching models…
This is a remix of 3aDri's Oral B toothbrush stand . I found that the peg was a bit too tight for my Pro 6000 toothbrush, so the stand would stay attached when I picked it up. I shortened the peg and then made adjustments to the pedestal…
The Philips Multigroom 7000 comes with a bunch of heads and guards, which is great. It also comes with a mediocre black pouch to store them in, which is not great. I've designed a number of accessory trays to suit a variety of needs.…
The faceplate in Night Gryphon's Logitech c270 webcam manual focus adjust ring is perfect, but the lenses on newer C270s have a slightly smaller diameter than old ones. As a result, the focus ring doesn't fit. I adjusted the inside…
The Neat Dupray steam cleaner: great for cleaning, cute design, total usability fail. So, let's trade some form for function. My Neat caddy does five things: Keeps the carrying handle from retracting into the body and sitting on top of…
This is a storage/drying rack for the Navage nose cleaner. The main unit sits on top, and the saltwater tank can be perched above it. The waste tank slides underneath. I've also made a separate holder for the nose piece. I thought about…
This phone stand is designed to hold a Samsung Z Flip whether it's open or closed, and without blocking the microphones or speaker. Combined slot - This stand has one slot with multiple depths (shown in the photo). Dual slots - This stand…
Update: February 27, 2026 The new Galaxy Buds 4 and 4 Pro have gone back to a clamshell-style case that's bigger than the old Buds 2 case by 1mm in every dimension (51x51x28mm). I've added a slightly larger version, but it's untested…
I really like @Adam's excellent tri-glide slide model. It's simple and prints quickly. I've widened the threaded version to fit a 1.5" (38mm) strap. UPDATE: @Adam has added a 1.5" width in both the threaded and non-threaded versions. I…
A simple mod for the Razer Tartarus keypad that provides a raised edge around the edges of the thumbpad for better grip.
IKEA's SCHOTTIS blinds are great, because they're cheap. And since they're cheap, the clips for adjusting the length of the blinds are also cheap. That's not great. Actually, IKEA's flat clips are ingenious, since they can expand as…
I have an IKEA desk made of LINNMON and LAGKAPTEN tops and ADILS legs. It's great, because it was cheap. It's also terrible, because it was cheap. The first problem is that the $5 ADILS legs are not uniformly constructed. Specifically,…
This connector is a really nice design. I wanted to use the original IKEA screws, so I shortened it from 10mm to 6mm and inset the screw holes to 3mm. If you're planning to use this without legs, the thicker original is probably better.…
This is a simple caddy to hold the beard, body, and eyebrow guards for Philips Multigroom clippers. I use it in my shower (held to the wall with silicone). I designed it so that guards will slip onto the two prongs without too much…
I really liked the idea of Randyre's C270 mount that clips onto the end of the X-Axis belt tensioner. However, I wanted it closer to the gantry to be more out of the way, and wanted to be able to quickly remove the camera if I want to…
This is a simple cover for the Razer Kiyo that you just drop on top of the webcam. When you need to use your webcam, it slides right off. My inspiration for this design was the idea of dropping a cloth over an object to cover it. I don't…
These remixes add mounting points to MarkL's excellent pistol grips for the Quest 2 controllers. There are two versions. Version 1: socket mount Version 1 is designed for these 12" elastic cinch straps , and should work with any 1"-wide…
The cable for the heated bed on my CR-6 SE was catching on a corner of the Y-stepper motor. When the bed moved forward, the cable would get caught on the edge of the motor and scuff. This bumper slides over the Y-stepper motor and…
I printed the Better Oculus Quest 2 Magnetic Lens Adapter by HaroldHyrax, but the magnets I have didn't fit well. Rather than resizing the holes, I decided to add a 5mm peg to the base, with a corresponding 5.2mm hole in the top piece.…
This is a remix of Kevin's excellent 40° stand for the MX Ergo. I made this a long time ago and shared it on Thingiverse, and I'm now moving my work to Printables. I had been thinking about how to add a button to eject the MX Ergo's…
My sister's cat, Penny, loves her cat tree. However, the top perch became loose and wobbly over time. The perch sits on top of a post, connected by a single bolt and a metal anchor hammered into the bottom. Unsurprisingly, the particle…
Introduction This semistatic bearing is intended for use in trackball pointing devices such as those sold by Ploopy and efog.tech, as an alternative to static bearings and ball transfer units (BTUs). It has a main bearing sitting on…
This wall-mounted caddy holds the trimmer and foil-shaver attachments for Philips Multigroom beard trimmers. I've mounted it in my shower above my Multigroom Guard Caddy using silicone. I made this caddy after realizing that I only need…
I really like my 24oz Owala Freesip water bottle, but there's one thing that's dumb: the locking mechanism that doubles as a carry loop. I want to carry my bottle by the handle while also ensuring it's locked. My models are inspired by…
After trying out the fillet radius finder made by victornpb , I designed my own version. I didn't feel the need for 1mm and 2mm radiuses, and don't need it to fit inside a caliper case, so mine goes up to 15mm. I also made it…
This is a clip for the HEX Ring Fan Duct created by takman29 and remixed by kroffty . The original clip is much simpler and does the job, but it's not the most aesthetically pleasing thing to look at. I need it to look like it fits…
I bought a KeySmart key organizer, but the key I use most often was difficult to pull out with one hand due to its smooth profile. So, I designed a small wheel that hugs the top of the key and can be turned with my thumb. This model is…
Inspired by 3Deth's and RICBRU's work, I've designed my own CR-6 SE air intake with two-tone air deflectors. I'm not sure if this surpresses any noise...it's just designed to look cool while redirecting the vent to pull colder air from…
I designed this candlestick phone for a high school production of Newsies. There are similar models on the Internet, but I wanted to make one that's super easy to print and assemble. It doesn't require any supports or screws, has no big…
I printed Jeff's Quest 2 Two-handed Grip to try out when VR golfing, and liked how easily the slotted version slides on and off without having to fiddle with my TPU knuckle straps. My remix shortens it by 75mm to use for other VR apps,…
I was thinking of making a shopping-token that combines a quarter and a Canadian Loonie ($1). JEM_3Dprints already made individual coins, so my remix is just both of the models mashed together at the height of a quarter. I rounded off the…
I shortened vertigo235's JANSJO shade so that it wouldn't block my C270 webcam (mounted with this clip ), and added notches to hold a thin diffuser that was inspired by this Thingiverse model . Print the shade in a dark plastic that won't…
This is a simple locking clip for IKEA BUMERANG hangers and shoulder shapers. https://www.ikea.com/ca/en/p/bumerang-hanger-natural-30238543/ https://www.ikea.com/ca/en/p/bumerang-shoulder-shaper-for-hanger-white-70293274/ Shoulder shapers…
This base allows you to set your efog.tech Endgame trackball at an angle. It connects to the Endgame with a collar, allowing you to rotate it to adjust the tilting and tenting. As you rotate the base, you'll raise one corner while…
The Ploopy Nano is a great little trackball that's just a trackball. No mouse buttons! There are, however, contacts on the PCB to put the trackball into bootloader mode (by shorting them with a paperclip), and these can be used to add a…
I made this belt box to keep my belts contained in a drawer and help them keep their shape. I typically buy reversible belts, so after wearing one for a few days I'll reverse it, wrap it up, and put it in a belt box. The next time I take…
I hate when straps flop around on backpacks. What more needs to be said? There are models for straps with the following widths and depths: 25mm x 2mm 20mm x 1.5mm If you need a different size, let me know the dimensions of your straps and…
I got tired of having my meat thermometer sitting on the counter or buried in a drawer, so I made a magnetic holder to store it on the side of my refrigerator. It's designed specifically for the thermometer in the photos, so the odds of…
I bought a new pair of glasses from Zenni, and needed to widen them so that the arms won't pinch my head. I wanted to adjust them outward at the temple, but the arms are thin steel and I didn't want to accidentally bend them in the middle…
I'm using my RM4 Mini to control a humidifier, but the IR command that turns it on also turns on another a device that's within range. To solve the problem, I designed a cover that limits the field of view and only allows the RM4 Mini to…
I wanted to add a tripod screw to my Logitech C270 webcam, but prefer not to remove the original base. So, I combined @Yourigh's excellent tripod screw (20x8mm version) with the clip-on C270 mount I made for the Creality CR6-SE. The two…
UPDATE: I returned the Teenii T1, because it didn't work well for my purposes. It seems that you can no longer buy it and the manufacturer site is dead, but I'm leaving this model up anyway. --- These sound dampeners are for the Teenii T1…
Smaller version of the Oneblade Ultimate Wall Mount that holds the Oneblade, three heads, and the adjustable comb.
I was having trouble installing a wire shelf in a closet, as the corner isn't square. As a result, one of the wall clips couldn't reach the drywall. I made this spacer so that I could get a solid connection with no wiggles in the shelf.…
I bought a used headboard for $10. It was poorly designed and the pieces didn't fit well together, which is pretty bad since its original price is around $150. The headboard has a small shelf with a ¾-inch back panel, but the pre-drilled…
This case is for a DAOKI USB buck-boost converter , which you can get from Amazon . I have a USB LED ring light that I've mounted to my CR-6 SE. The light has an inline controller for power, brightness, and colour temperature, but that…
These are all currently available results.
