Counting matching models…
I wanted to challenge myself to design a water bottle rack that could hold 12 water bottles and also be printed/assembled in less than 1 day. Note: pictured 32oz Nalgene only fits on top row Non-Printed Parts for each bottle x2 - 5/16"…
Mount an Apple AirTag into a round 32-34mm steerer opening. I only recommend using TPU, and have only personally used 95A TPU. Forks Tested the fit on the below forks. It may fit other makes/model/years, but I would suggest measuring the…
A clip to hold 5mm brake housing and 4mm shift housing together on your bike to keep things nice and tidy and rattle-free. Flat front design solves the problem where cables may pull away from each other ( see this design ). Also, its a…
This is a set of models to grow cat grass hydroponically in a standard or wide mouth canning jar. Want to keep your new cat grass upright, despite your cat's best efforts? Check out this companion print - Base for a Canning Jar…
A charging mount for the Shokz Opencomm/Opencomm2 headphones. The original charging cable fits securely in the mount and gives a flat surface to mount using double-sided tape or 3M Command Strip. Allows the charger to be hidden behind a…
I needed a 4x3" downspout endcap for a hydroponic project. I modeled this for a vinyl downspout I picked up from Lowes. There is ~1mm clearance for silicone caulking to make it water tight. Need a water level indicator for your new…
A mount to support a thru-axle bike vertically against a wall. Take off your front wheel, roll your bike to the wall, and push. Important Notes - Use at your own risk. Be aware of cranks/pedals! Pedals will inevitably ding a wall, your…
I needed a very low profile diffuser for the Daylight on Matchstick LED pcb, so I made this design in a morning. Print settings filament: PETG white or clear layer height: 0.15 for translucency Post Processing Initial design has a bridge…
I was inspired to make this 3d model by this video by Dr. Kratky . Designed to be used in a 3" deep gutter/downspout system. *this is just a little test section for a larger row, it was a coincidence I printed an endcap in translucent…
I needed a dropper compatible under saddle mount for my cateye rapid mini. I really liked my solution for Ergon Saddles , and copied the design over to the saddle rail interface from this solution . IMPORTANT NOTE : PETG will creep, I…
A printed replacement of wide mouth canning jar bands/rings (hold canning lids in place). I needed a solid platform to make other threading designs and lid inserts for wide mouth jars. Example custom canning lid: Cat Grass - Growing Kit -…
A rear bike light mount specifically for the Cateye rear lights (specific models below) to mount under an Ergon QuickClick supported saddle. Ultralight and sturdy! Saddles Ergon saddles with Topeak's QuickClick mount. Locate a threaded…
A bolt-on quick-release mount for the Cygolite Dash bike light to replace the stock rubber strap that would not keep the light in place. Trail approved! One-handed quick-release! Minimal footprint! Easy installation without removing…
Apple AirTag mount specifically for the Ergon QuickClick supported saddle. Saddles Ergon saddles with Topeak's QuickClick mount. Locate a threaded hole under the saddle to confirm. Installation Do NOT over tighten bolt and risk cracking…
A stable base for canning jars 4oz standard mouth 8oz wide mouth (pictured) Jar screws in from the bottom, to keep canning style lids in place. I originally made this base to keep our cat from knocking over cat grass grown in a 8oz jar,…
Updates 10/8/23 - WORK IN PROGRESS and I intend to publish some updates in the coming months. Current models are absolutely functional, and I am using them to grow greens today. Just wanted to make some changes to fit better in my…
I really liked my solution for Ergon Saddles , and copied the design over to the saddle rail interface from this solution BUT a design that wouldn't interfere with my saddle position being pushed totally forward like this one would . So,…
A shim for the “Jack the Rack” handlebar mounted bike rack to fit on 35mm diameter handlebars. Jack the Rack (https://wholegraincycles.com) I have tried a design for PETG that allowed the rack to snap into place. This design required…
Securely mount your iPad Air above your Peloton Bike (original non-swivel) monitor. Mounts to top vesa bolts of the monitor. Requires (x2) M4 16mm socket head (x2) Silicone bumpers 10x3mm ( amazon link ) Note: Installation requires the…
Our cat eats ½ can a day, so we need to store the rest in the refrigerator overnight. This is a can lid printed in TPU to get a tight fit and prevent gross cat food smells from getting out. Also, I needed a TPU model to help dial in a new…
Canopy opens up the space above your desk to endless possibilities. Canopy is designed around the 1-¼" (32mm) wooden dowel. Included is a set of bases to attach to a desk, and a set of attachments that use a locking split-ring for a…
Use a 6x2mm magnet Print 100% infill No supports needed
The "ShortStack" wallet weighs just .5oz (14g)* and is 0.14" (3.6mm)** thick fully assembled No Snags! No sharp corners and no bulging elastic to get caught in a pocket. No sewing! CA glue (superglue) secures elastic in place surprisingly…
Keep the dust out of the ports on your Nitecore NB10000 while on your adventures. Also prevents accidental presses of the power button. Confirmed fits Gen 2, untested on Gen 3 Print Settings Material: TPU 95A Support: None
A cover to keep the dirt off a Specialized Purist water bottle. Easy on/off of the cover while keeping the muck out. Print Settings: Material: TPU 95A Walls/Perimeters: 2 walls w/ .04mm nozzle
An adapter to replace the plug that comes with the OneUp Components EDC Threaded Top Cap . Designed to be used with the Bike - Mountain Bike Fork AirTag Holder (TPU) . Recommended Print Settings TPU 95A .15mm layer height NO supports…
Mount a 3x4" downspout to a hand railing Details fits hand railing width 40mm vertical railing supports must be ~8-12mm in diameter includes zip ties routing around vertical railing, though not required Print Settings Fits on a Prusa Mini…
A SUPER stable base for a 8oz canning jar. My cat is 100% not tipping over cat grass EVER AGAIN. See original unweighted design for more details Should fit most 1.25lb and 2.5lb 1" weight plates. amazon link to 2.5lb weight pictured
Simple functional badge holder thats fast to print, tons of space to put a logo, and fits a 4mm (5/32") metal grommet so it should last for a long time! Models for with and without the logo. Links to the products I used 4mm grommets 4mm…
A 90 degree mount for a Surface Go. Slides in, and there is access for wires.
These are all currently available results.
