Counting matching models…
Made for my S22+ with a UAG Monarch series case (13,5mm thick). Can easily be printed without supports, just expect that you may have to cut a few loose pieces of plastic at the top bridging part. It should friction-fit the charger just…
Use the thin nut that comes with the antenna to pull the lower hex part into its place (3rd picture). Printed it with PET-G, 0,2 mm layer height, 15% infill. You will need to push the grate aside a bit with a screwdriver or something to…
For the 7 screwdrivers (SL 6/5/4, PZ 2/1, PH 1/0) of the Parkside 37 pcs Screwdriver Set (465522_2404). To be used with heat set inserts and the DIN rail tool holder base (takes M4 x 6 mm inserts and M4 x 12 countersunk screws). Print it…
My printer is pretty well calibrated, so it fits really nice on my Armour G, but there is a small rim inside that you can file down if yours is too tight. Also you might want to grab onto the pod itself, so you don't rip it out. Should be…
For the Mitutoyo Vernier Caliper with Thumb Clamp 0-150mm, 0,05mm, metric model (Code Nr.: 531-101), should probably work with most calipers. I bolted this holder to my tool wall (has 10x10 rectangular holes with 38 mm distance) with…
For the 6 precision screwdrivers of the Parkside 37 pcs Screwdriver Set (465522_2404). To be used with heat set inserts and the DIN rail tool holder base (takes M4 x 6 mm inserts and M4 x 12 countersunk screws). Print it from PLA, 2 or 3…
A carry box to hold 2 Vaporesso Armour G / GS MTL / DTL pod (although I only have the DTL pod, but it should fit the MTL). I made the snap-in part a bit tight, so you will need to file down a bit to close it “smoothly”. You will need a M3…
Since the original cover was made for Camera Module 2 it didn't fit the newer version, so I made some adjustments on it.
For the magnetic screwdriver and it's bitholders of the Parkside 37 pcs Screwdriver Set (465522_2404). To be used with heat set inserts and the DIN rail tool holder base (takes M4 x 6 mm inserts and M4 x 12 countersunk screws). Print it…
Usually, 300 mm calipers have longer jaws than the 150 mm ones, so my Mahr 16EX could not fit the ordinary holders. Print it with slanted side down, no support needed. I printed it with Esun PLA+, 2 walls and 15% grid infill. Caliper…
Made for Mustool MT11 Pro, with lead holders on the sides. I designed it with the silicone case on, so if you don't use yours, it will be sightly loose. Printed with PLA, 0,2 mm layer height, placed on the 45 degree face.
Model contains a single (15 mm wide) and a double holder (40 mm wide, 24 mm hole distance) and they are to be used with 35/7,5 DIN rails. It's primarily made with the idea to put a melt in / Ruthex threaded insert ( M4 x 6 mm ) into the…
Made a 15 degree raiser for my Discipad Pro (probably works for the normal version too). For the best fit, place it with the flat side down (the one with holes). Push 2 threaded insert in the holes (I used Ruthex M3x6mm) and 2x10mm pan…
For the Stanley PowerLock 3 m x 12,7 mm tape measure (Code Nr.: 0-33-238), not yet confirmed if it works with other models. To be used with heat set inserts and the DIN rail tool holder base (takes M4 x 6 mm insert and a M4 x 12…
It can hold 7 different sized (Ø5 mm, Ø4 mm, Ø3,5 mm, Ø3 mm, Ø2 mm, Ø1,5 mm and Ø1 mm) centre drills. To be used with heat set inserts and the DIN rail tool holder base (takes M4 x 6 mm inserts and M4 x 12 countersunk screws). Print it…
For the Kraftform Kompakt 62 Set (Code Nr.: 05 059297 001) Print it from PLA, 2 or 3 walls with atleast 20% infill.
For the 950/9 Hex-Plus Multicolour HF 1 Set (Code Nr.: 05 022210 001) Print it from PLA, 2 or 3 walls with atleast 20% infill.
Holder for a GARANT Multi-purpose shears with 2-component handles straight, with adjustable handle opening, overall length: 205mm (763030 205) I bolted this holder to my tool wall (has 10x10 rectangular holes with 38 mm distance) with…
It has place for 6 countersink bits with 2x Ø10 mm, 1x Ø8 mm, 2x Ø6 mm, 1x Ø5 mm shafts (20,5 mm, 16,5 mm, 12,4 mm, 10,4 mm, 8,3 mm, 6,3 mm). To be used with heat set inserts and the DIN rail tool holder base (takes M4 x 6 mm inserts and…
For the 967/9 TORX BO Multicolour 1 Set (Code Nr.: 05 073599 001) Print it from PLA, 2 or 3 walls with atleast 20% infill.
For the newer Tool-Check PLUS Set without the belt clip (Code Nr.: 05 056490 001) Print it from PLA, 2 or 3 walls with atleast 20% infill.
It can hold a single standard (12 mm) deburrer and 6 extra blades. To be used with heat set inserts and the DIN rail tool holder base (takes M4 x 6 mm inserts and M4 x 12 countersunk screws). Print it from PLA, 2 or 3 walls with atleast…
A GARANT LED Flashlight holder from Hoffmann (081505 125). To be used with heat set inserts and the DIN rail tool holder base (takes M4 x 6 mm insert and a M4 x 12 countersunk screw). Print it from PET-G, 3 walls with atleast 20% infill…
I ordered a Garant Storage box and neither it came with a divider nor I can see any ways to purchase, so I made this to serve as one. Fits pretty well.
These are all currently available results.
