Counting matching models…
A three piece sunflower cookie cutter. The three piece design allows you to achieve the desired impression depth in the middle part regardless of the thickness of the dough. Or you can cut out the center part completely and swap it…
A display stand for 4 folding or small fixed-blade knives. Comes in two versions, one "hollow" (blue renders and photos) and one solid (red renders). Print instructions At 100%, both versions come up 75 mm wide. Prints on its side without…
My remix of a board game tile grid by garyacrowellsr with extended customization and minor bugfixes in the SCAD. Original version here: https://www.thingiverse.com/thing:25158 As is, the STL fits 45 mm Carcasonne tiles but can be easily…
A stand for four small ladies' watches with a bowl for small jewelry in the base. Note: I see that quite a few people use the stand for bigger watches – if that's your plan too, consider scaling the model up considerably. The original…
A small mitten hook carabiner, handy for non-critical outdoor applications like hanging/attaching small gear items, securing tarps, hammock underquilts etc. Easily snaps in and out of cordage loops juts by pulling the cord through the…
A free-standing desktop headphone stand, similar concept as the famous MakerBot stand , however designed from the ground up with the idea of the back of the stand being flat. This allows the stand to be placed with it's back against a…
A simple cord tensioner hook to be used for guylines, ridgelines or lines of any sort when camping or during other cordage-intensive activities. I use (and recommend) it in combination with my BEEFY TRI-LOBE TENT STAKE CAP for a killer…
NOTE: Use of the first STL (v2.0) is recommended, more info in the update notes below Pegboard holder for a set of 9 Allen keys / Hex wrenches / Inbus wrenches. Designed for sizes 1.5–10 mm (common Wera sets). Pegs on the back are for 25…
A simple tool for mess-free grinding, dosing and even distribution of coffee grounds in espresso baskets before tamping. The tool consists of two rings that are screwed together with a variable number and sizes of spacers between them to…
A headphone hook designed to be glued under a desk or under a shelf using double-sided tape. Print instructions The "shelf" part of the hook is ca. 50 mm deep, scale the model accordingly if your headphones have bigger bridge than that.…
A two-part drumstick holder for vertical 1.5" (38.1 mm) drum rack tubing or any vertical tube between 20 and 45 mm. The inner diameter of the holder cup and ring is 7 cm (2 3/4"), so it can hold 6 to 8 drumsticks ( a smaller version for 4…
A modular charging smartphone stand for the IKEA LIVBOJ wireless charger pad. The phone can be held in both portrait and landscape orientation with the charging pad still placed in the middle of the phone. The cable runs in a slit in the…
A simple test tube holder (test tube rack, test tube holder or whatever :) Holds four test tubes and has a wide base for stability. Prints without supports on its side (see picture). At 100%, the inscribed circle of the hexagonal holes is…
A simple box for Hario V60 paper coffee filters. The non-labeled STL is for the 02 size (bigger ones), the other one, as the filename suggests, is for the smaller 01s. Fits the whole 100 pcs pack plus some extra so that you can refill…
A set of skull-decorated cymbal mount nuts for a drumset (designed for Roland e-drum mounts, but will sure work for others too). The skulls were remixed from a wonderful design by bugman_140 (…
A headphone hook for 1.5" (38.1 mm) drum rack tubing (common size of Roland e-drum racks). You can choose between two designs ("Headphones" labeI in writing or a simple icon). It clamps onto the tubing using two M6 bolts. UPDATE: Added…
A two-part drumstick holder for vertical 1.5" (38.1 mm) drum rack tubing. The inner diameter of the holder cup and ring is 5 cm (2"), so it can hold 4 drumsticks ( a bigger version for 6–8 drumsticks is available here ). It clamps onto…
A stand for playing cards, designed especially for kids who can't hold the cards in their hadns yet. It can stand on a tabletop or the "middle leg" of the frame can be held in a hand in a similar way playing cards are normally held, which…
A re-doing of the idea by ebrown54 ( https://www.thingiverse.com/thing:2882312 ) making the cap a little bigger and more robust. Overall, a cap is a big improvement in the comfort of using the stakes, totally worth it. I use (and…
A simple holder for the iRobot Roomba chager base, intended to be glued to the floor using double-sided tape. It holds the charger in place, but it can still be easily removed (which would not be the case if you just glued in place the…
My take on the 3D printing evergreen – filament spool holder. The base is formed by a bunch of dovetails, allowing it to be adjusted to any width and still hold together. All the dovetails are identical, so you can assemble it as shown in…
A simple three-stack chip holder designed for the Noctiluca board game. Fits in the original box accurately so that the chips do not fall out when the game is stowed away. Print instructions The native dimensions are for chips 35 mm in…
The tool can be removed from the slot immediately after unclipping the trolley, does not get trapped inside. Print in PETG.
The new Tescoma Delicia cream whippers do not come with a cap to cover the cartridge thread, so you either have to have the thread exposed (ugly, unpleasant to touch, might get damaged) or keep the long, charging cartridge container on…
A stand for a single wristwatch or smartwatch that automatically grabs the watch using its own weight and holds it regardless of the type of bracelet or strap used. The main idea is that you don't have to mess with the strap, fasten it…
The inner width of the boat is 45.5 mm, which just fits the cards of the Czech edition of the game for storage. If you like to store the cards in the boats, make sure your card size will fit or scale the model accordingly. Prints easily…
Any decent Christmas tree should have balls. They don't have to be literal balls, though, they can be just expressed literally. As can also the other typical motives of Christmas tree ornaments. This is a set of ornaments describing the…
A simple cap that screws on the threads of common CO2 cartridges (either 1/2" x 20TPI UNF or 3/8" x 24TPI UNF) to protect the threads or adjacent items form damage when the cartridges are packed in a bag, carried in a pocket etc. The 1/2…
Úložiště modelů vytvořených účastníky kurzu MediSummer 2026
These are all currently available results.
