Counting matching models…
Want to look at the INDX with your hands, as well as your eyes? Does the infinite void beckon you to thrust your hands into the machine while it's working? Do you want to see your first layer? Do you just not like the front plate? Then I…
This is an expandable filter drawer holder for spare filter drawers. this is specifically for the drawers that are used in the ZWO Lens adapters and V2 of the M42 and M54 filter drawers. You will require M3 Heat inserts and M3x10mm screws…
A model that will allow you to mount your MeLE Quieter3Q in any orientation. the dovetail and retention system means you can quickly install and remove the mini-pc. It was designed so i could very easily move it between my…
I created this replacement faceplate for the AM5 mount to better facilitate cable management and to provide some extra mounting points for bits and pieces. The cross in the centre has a standard 20mm spacing with threaded M4 screws found…
This is a replacement end piece for ZWO's EAF Bracket. This was designed primarily for use on the ASKAR FRA400 telescope, however it should be useable on other ASKAR telescope focusers, I've printed this in Orange PETG, but it should be…
A solution to close up the holes in the stock top hat for the C1 INDX. You will need to drill out the existing PTFE holes to 14mm . Most Step drills will have a step at 14mm. Be warned, the tolerances on this are very tight. there is…
I got all the way through printing and assembling Chris's open ball vice with the XL base, and the base mods from DET-Man and ThatRobHuman, and realised that I really didn't like how the work-holding/rotation system worked on the original…
I wanted a spool holder with bearing to stop the cardboard spools wearing down while printing. I looked around online to see how other people had solved this then made this from scratch. BOM : 1x M8x80mm bolt (~74mm of thread, 80mm total…
Very self explanatory. I've had great success printing in TPU @ 0.2mm layer height.
A simple solution to fit the inexpensive Wyzecam v3 Camera into the CoreOne enclosure. This carries a risk of breaking the camera because it requires the disassembly and installation of 3rd party firmware (only if you want it in Prusa…
This is a 180 degree Rotation scale for the ASKAR FRA400 telescope, though it might (should?) work on any of the ASKAR scopes with a 78mm drawtube. Major divisions at 30 degree, minor at 5 degrees. Line up the centre division with your…
I've printed this well in PETG, 0.2mm layer height. You'll need 2x M4x4mm brass heat insert per Back Plate. 6x M3x4mm brass heat inserts per multi-plate (to fill all the holes - or only put in what you need)
My solution to be able to see at a glance what nozzles and filament type you have loaded in your INDX. I've printed this in PETG with 0.25mm nozzles., These are 2mm thick, and there is a recessed 10x5x1mm pocket in the back for a small…
These are all currently available results.
