Counting matching models…
Quick mount that fits various PTFE fittings I found in junk drawers. Use short PTFE cutoffs, or full reverse-bowden with a longer tube. Prevents filament from scraping against the box during printing. Go full reverse-bowden (PTFE tube all…
Holds 10 rolls of bags and has screw holes to be wall mounted, or use two sided tape/Command Strips to attach. Bag rolls are about 30mm in diameter and 61mm wide, so this dispenser might work with others. Initially designed without the…
Inspired by Everydecentnameistaken's cable puck from earlier today, I quickly threw together a similar puck that includes an easier to grip ... grip, and uses the one-layer-high slicer trick rectangles to print easily without supports. (…
Flipped Buhler's print in the X axis so the final product has the nice texture of the print bed facing the viewer rather than the topmost layer of the print (which always has nozzle scratches). Also scaled to 125% then rotated to still…
Hides away by snapping directly into any 3030 channel, on both the Mini and MK3 series. Useful if you do frequent nozzle swaps. Tested and working, good offset for the distance for first layer calibration for the SuperPINDA specifically,…
These may fit other pharmacies' bottles too. I wanted something to affix prescription bottles inside the cabinet door so they're easy to get to. I called the bottles large, medium, and small, but they don't have names unfortunately. The…
I saw Martin44's LED Bar which mounts into those mysterious hexagonal holes on top of the Z axis, but it's too big to fit on the MK3S buildplate as-is. I split it into three pieces - it fits on the Mini now - and added pin alignment holes…
User Gabe's excellent original design seemed a little short, so I increased the height of the platform 25mm using Blender. The added height makes it a little easier to see items/edges of prints on the closest part of the print bed. It…
For a hosed hand sprayer used as a bidet or for pets or cleaning diapers or whatever. The one that came with mine (~$20 on amazon) was too large for the cistern lid to sit correctly. Cistern wall was 11.5mm-ish thick, for reference. Print…
I went to print Frankincell's wyze cam mount and found that it sort of fillets up a bit from the bed which means overhangs that are hard to print. I literally just sliced off the bottom couple mm of the object so it's flat. No supports…
Lid to protect your cup from bugs, pollen, dust etc when you're outside. It snaps on and you can carry the cup by it, but it does release when you intend it to. (this took half a dozen iterations to do that) Print instructions I'd suggest…
The tester is available from many different places with different names for under $10. This one is labled HW-586 The case protects the PCB but exposes the USB input and the battery / resistive load ports on the side. The bottom of the…
Took the existing LM10UU adapter into Blender and extended the open area by 26mm.
This is a "lock" which means you can tell at a glance (just poke your head in the room) if the cage doors are completely closed. It's for piece of mind since otherwise to know the cage is fully closed you must physically tug on each door,…
Super quick and dirty - I took Evolution80's original model and rotated it in Blender 90 degrees so the 3030 mount and the sheet holder are now parallel with each other. It works as support for the unsupported end of the sheet, and as a…
Nature's Miracle Small Animal Cage Scrubbing Wipes 30 pack and Clorox Disinfecting Wipes 35 pack holder - for some reason, these two unrelated products have identical containers, I discovered by chance after printing. Has screw holes to…
A magnet this size is dangerous, so this is a little holder which will help keep it from shattering. You can use it as is to really hold that xmas card on your fridge, or attach it to something permanently with a 3d pen. Super glue or use…
We use this so it's easier to sweep the laser around for pets to chase without having to press the button down. The ring can be slid into place and twisted counterclockwise over the laser pointer's button and will remain on without…
The included steel water dish holder makes it impossible to remove the dish to refill it without it suddenly releasing and spilling water everywhere. This was a replacement holder for "MidWest Homes for Pets Snap'y Fit Stainless Steel…
Started with padigree's scoop/spatula and added pockets for 6x2mm cylinder magnets into both the scoop and the spatula objects, and added a hole through the scoop's handle so it could be hung. Super glue the magnets into the pockets so…
Supports required and will be a pain. This is the main pulley which the pull rope is wound onto. There's a spot for the rope to be attached to the middle.
The included flag was bent for some reason so this was created to avoid replacing a non-print-impacting part. You'll almost certainly want to use black filament for this print since you need to for sure block the IR light in the sensor. I…
Couldn't find one which fit the 240EB so here's a quick and dirty one. Friction fits close enough to stay in place and only contacts the printed part in small areas too keep cooling from being impaired. Use something other than PLA since…
Seems strong enough for decent clamping force. Normal TPU print settings apply: no retraction, slow speed, light extruder tension, etc. Looking at amazon there are a bunch of identical looking 4.5 inch vises so they'll fit those other…
Sleeve to protect the bottom of the bottle from scratches. Print in flex filament, I used old Sainsmart TPU I had on hand. This fits the 14, 18, and 22oz bottles, larger ones have a bigger circumference and will not fit. Print…
For the 33 quart + 12 quart combo set; both use the same clasp. I'm missing one of them so whipped up a functional enough replacement. Print instructions Other than needing supports it's an easy print. 0.3 draft settings are OK, I used 5%…
Quick and dirty foot to prevent it from falling over. The bottom of this one was slightly over 40mm wide so it's squished a small amount to hold the foot on. Gate model is "Toddleroo by North States Quick Fit Oval Mesh Baby Gate", it'll…
Quick and dirty mount for a plastic microwave plate cover Print instructions No specific considerations other than maybe using PETG, the cover can get pretty hot
Trying to print the excellent Bag Cam Clip by Andrei at smaller sizes fails for me at the hinge pins. I had the idea to use a small bit of filament instead, so added ~2mm holes. It's a pretty strong little clip even at this size and is…
Friction fit. Soft jaws are 2mm thick beware so you'll lose that much travel from each side. Standard TPU printing advice applies: turn off retraction, reduce fan, reduce speed, reduce extruder tension.
This is an old, generic percussive (thumping) back massager that came with a couple heads, a rounded one and a bumpy one, and my spouse requested a pointier version of the rounded head to target muscles better. I measured the threads on…
Fits a Nayoya massage ball roller, but looking at amazon there are a ton of brands which are clearly the same product, so it'll work for those too. Provides a larger area to grip than the roller body itself. Print instructions Doesn't…
Amazon product ID was B08F9X1Q4J with the godawful title of “Delippo 240W 20V 12A Laptop Ac Adapter for ASUS ADP-240EB B Rog Zephyrus Duo 15 GX550LXS RTX2080 rog GX550LWS-HC099T i7-10875H rtx2070” It's almost certainly a re-badge of…
Attached at the corners to help when replacing the screen, when it's all done and the screen will be pressed into the new adhesive, this is to help keep it straight. I haven't tested it, but because the screen for the Surface Pro 4, 5,…
Extended the wires for the thermistor on a cheap digital thermometer and haven't decided where it should live permanently yet, so here's a very quick and dirty panel mount for it. The item's name on Amazon is “Hotloop Digital Oven…
Someone asked if I already had this due to my other window quilt pulley upload, and it turns out it's one of the first 3d prints I designed from scratch back in 2015ish. Turn on supports to print it, and give it lots of perimeters and…
Quick and dirty mount for a DIY LED onto a standard gopro-style mount. No reason it wouldn't work for something else too. Has some channels for zipties, or boolean it onto some other 3d print if you fancy that instead. Print instructions…
The arms that hole the pusher's pole have gotten even less effective over time, so these are simple printed clips that pull the pole close to the main body of the snow pusher.
These are all currently available results.
