Counting matching models…
I was looking for a simple, hands-free way to clean the black soot off the lead screws on my X1C, MK3S and Prusa Mini. To use this cleaner, simply stuff some tissue, paper towel or sponge material in the cavity, douse it in IPA and clip…
These are 80mm diameter spherical lithophanes lit by tealights. There are 4 scenes and two hole sizes ( 35.7mm and 29.6mm ) for the tealights. Each one takes a little over an hour to print (on a Bambu X or P series). I have included both…
Build plate holder for 5 plates for the Bambu Lab X1 and P1P series printers. Each level of the plate holder is offset by 5mm for ease of removal. Heavily chamfered slots for ease of insertion. Wide base for stability. Fusion and step…
This is a chain conveyor I designed to remove poop coils from my X1C printer. It uses a NEMA 17 motor and a stepper controller driver to move poop from the printer discharge to the end of the table. Total cost is about $60US for the…
I loved the OP's Fusion 360 design and made some modifications. The hinge design is ingenious and fully parametric, but the design would break under certain circumstances. I made the following changes: Magnets can be sized up to 10mm…
I developed a chain and sprocket system for my Chain Conveyor For Bambu Poop . I'm publishing the chain, sprocket and shaft elements separately for use in other projects. The chain is strong and flexible and all components are…
I remixed Ronald Cauldillo's excellent step van model into a mail truck. I leave these in my mailbox for the letter carrier at Christmas. Consists of 13 stl's. Can be printed all at once, or the body and the tires/windows separately. I…
Great Thing model by JS-Studio. Thing is holding a 100mm moon generated from Lithophanemakers.com and printed on a Bambu Labs X1C. The hole for the tea light is a negative volume object placed towards the rear. I sized mine for 35.6mm,…
Simple horizontal cuts on the axles for flat printing with no supports. I also created a 128mm solid axle to hold the worm gear to replace the 39mm and 88mm axles. The original design wobbled a bit when driving the 60 tooth filament guide…
I always had trouble scooping out the little filament waste bits that fall off the printer plate in my X1C. I made this simple extrusion to brush the detritus into into the bin at the front of the base inside the printer. Simply brush the…
No supports required, lid and box print separately and lid snaps onto the box. Magnetic closure, if desired. With the included F360 file, you can adjust all parameters including length, width, magnet size, lid height, box height, hinge…
A simple double-extender for coat hangers. Simple print, no supports required. Parametric design for the thickness of the hanger. Works with wire and plastic coat hangers. Fusion file and 2 .stls for 5mm wire and 9mm plastic hangers. To…
Original model https://www.thingiverse.com/thing:3957882 I included a .3mf set up for a Mosaic Palette 2S. I sank the model into the plate a little to get a flat first layer. STL included to paint your own for MMU, Bambu or other multi…
This is a simple lens cap for the Akaso Brave 7LE action camera.
I used the scad file from https://www.thingiverse.com/thing:189264 to create four 60x40 boxes with sliding lids. These are glued to a base I made in Fusion. The included base is for four boxes, but as I get older, I anticipate needing…
Includes Fusion 360 project
The skull from Makerbot's T-Rex is scaled 2x with a cutout to hold the tape spool. The dispenser can either be printed as a single model with the base attached, or the dispenser and the based printed separately and glued together. Some…
Angled the handle a bit for easier scooping. No supports required.
This is a quick release tripod adapter for Akaso action cameras. Akaso is similar to GoPro, but the “tongues” on the Akaso mounting hardware are thinner than the GoPro hardware. I modified the original model from tmorris9 on Thingiverse…
I converted this excellent Dodge Charger model into a Polk County FL sheriff's car. No painting is required, all artwork is done as separate stls. To remove “Polk County” simply make it the same color as the body. The windows and tires…
A holder for business cards in the shape of a bowling ball. I made the Rift Apparel logo for a friend, but I included the blank ball with no logo as well. I printed in PLA at .2mm, 5% infill. T print the logo version, load the Ball and…
I scaled to 30% for doll houses and 5yr old tea parties.
I have collected about 40 ball caps over the years and they were all stacked up in different rooms in my house. Some were nostalgic and I wanted to preserve them. I have included two rack designs, one with a hook and one without. This is…
A great little storage/travel box for up to 4 18650 batteries. I added a magnetic closure (8x2 magnets) for the lid so it would not open up in the suitcase or carry-on. Easy print, no supports.
UPDATE I've updated the design to make the arm a little stronger. Every arm I tested (in PLA) broke at the hinge point. Might need to be printed with ASA or CF. My filament lever broke. I had some 8x3mm magnets laying around, but they are…
Original model https://www.thingiverse.com/thing:4672484 I originally tried to paint this model in Prusa Slicer but there are a lot of nooks and crannies making it almost impossible to get 100% coverage. I separated out 44 different…
I modified the lid so that it can be printed separately from the bottom. Supports are not required. The lid snaps onto the bottom. I have included stls for a 100x75x60 mm box. With the included F360 file, you can generate any size box you…
Fusion 360 project included.
I love making lithophanes because they are colorful and easy to print. For best viewing, they need a brighter light than one tealight can provide. I designed a display system that can use up to 3 tealights or a USB light stick. The top of…
Traffic cone knob for Prusa printers. My favorite old Flashforge Creator sample print file turned into a knob. The design allows you to turn the knob faster from the pointy end and slower from the base. Both single model file and…
Fully parametric design in F360. Enter plug lower and upper diameter and the height. Print with TPU at 15% infill. If you need a different size, leave a request with required dimensions in the comment section.
For chairs with built-in cup holders, this design uses the cup holder to support the caddy. Easy to remove for cleaning. Built in cable-ways for remotes with cables (for chair reclining and massage controllers). I have included the…
I was surprised at how expensive an OEM replacement for a cargo net retainer costs for my GM car, so I made one. Printed in two pieces to eliminate supports. 3 thread sizes for the post are provided; 7mm, ¼-20 UNC and 5/16-18 UNC. Bambu…
No painting required. Some supports required. Load all body stl's on the plate and assign colors (exclude windows and wheel). Bambu Studio .3mf included for my print settings.
I made a new scene for the teal light display. This is such a wonderful gift idea with possibilities for any holiday. Kudos to @JamesThePrinter. I made this scene using separate .stls for the artwork. Load them all at the same time and…
A parametric can lid for temporary food storage in the can. An integrated dipper spoon allows you to extract pet food without having to soil a spoon. I have included lids for 86mm and 66mm cans. With the included Fusion 360 file you can…
I wanted a way to show off my plate textures, like my new PET plate, on all sides of the box. Parts are printed separately and the box is glued together. Two styles are included, one with support posts (V2) and one without (V1). You can…
Simple Christmas tree with two different hole sizes for tealights. These are the ones I use 35.8mm https://www.amazon.com/gp/product/B00AEKW3AQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 and 37mm…
Simple stand to hold the wet mop pad off the floor to air dry. I know, just hang it on the wall, but this is so much more fun. Print the .stl x2 and glue together. Fusion file included.
Remixed the box for the hygrometer to remove the back of the recess for better airflow.
My Akaso action camera has a ¼-20 thread mount. I was always nervous that I would drop the camera when using it by hand, so I designed a screw with a hole to be able to use a wrist strap. These straps work great. For a stronger screw…
I was missing the handle on my Ryobi angle grinder, so I designed one for 8mm thread. Printed in ASA at .2mm, 15% infill. I found an 8mm bolt and cut off the head to use the threaded stud. Fusion file included to modify the size or thread.
Chrome logo filament spool. No painting, each color is a separate stl. stls for hex and solid versions are included. Add the 6 stls for one side (male or female) together on the plate and accept as one model. Assign colors as desired.…
I was surprised at the OEM cost to replace my broken cargo net retainer for the trunk cargo net on my 2007 DTS. So I made my own. I made it in two parts for support-free printing. The inner post thread is 7mm, but I included the Fusion…
Yin Yang filament spool. No painting, each color is a separate stl. Add the 6 stls for one side (male or female) together on the plate and accept as one model. Assign colors as desired. Two versions are included 1mm deep to minimize…
I ALWAYS clean my AMS rollers and weigh my filaments every week. But with three AMS' on two printers, I don't need to clean rollers or weigh filaments on slots I haven't used that week. I made a simple indicator that I slide to green…
The Aspire Nautilus ecig tank has an airflow ring that fails after a few months of use. A small spring indexes the ring to one of four holes. After a while the spring degrades and the ring spins freely. Rather than throw the tank away, I…
These are all currently available results.
