Counting matching models…
My friend's dad kept losing the original hopper paddles for his walk-behind spreaders. These fit snugly on the hex shaft and also drop down 1/4" into the hole in the hopper to minimize the slop in the shaft. These were printed in PLA and…
Designed this in Inventor 2015. It's three separate parts. Base was printed in white with the outer ring and B printed in red. Measures 6" x 6" x 0.35" Print Settings Printer: Folger Tech Prusa 2020 Rafts: Doesn't Matter Supports: No…
I designed this cloud base to go with the 6-piece rainbow I also designed. The rainbow can be found here: http://www.thingiverse.com/thing:728320 Took about 12H 25M on my Prusa i3, white 1.75mm PLA, 25% infill. Category: Sculptures
Printed in PETG, perfect fit for the 110mm wheels that Flite Test ships with some of their kits. I designed this holder to be able to wall mount my FT Legacy V2. It's designed to cradle the 110mm wheels that Flite Test includes with the…
I was sick of the lackluster battery-powered performance of my SainSmart vacuum pump that I use for my filament vacuum bags so I modeled this up. It replaces the three AAA batteries allowing you to run it from a 5V supply or benchtop PSU.…
Traced from a JPEG in SketchUp. 100mm wide and 4mm tall overall. 2mm thick base and 2mm thick lettering area. Category: Signs & Logos
Needed to deflect the air exhausting from a control cabinet
Simple 40mm spanner wrench I needed for a project
a 6-piece rainbow for single extruder machines. Each part is labeled with its corresponding color. UPDATE 4-18-2015 I shrunk the external perimeter of each of the inner parts by 1/32" so after printing they'll fit together as they should.…
I was tired of things always floating around in my center console and needing to pick it all up every time I wanted to put something in. This fits in my 2017 Cruze in the rear raised section of the center console. The large Delphi GPS bag…
Designed this to fit into the t-slots on our mill tables. 2.3" ID on the vac side, 0.6" width for t-slot
These allow you to mount two 3.5" hard drives in the original location for a single 3.5" drive. 4 6-32 x 0.15" heat-set inserts are required, installed from the bottom. These will accept the original Cooler Master shoulder screws and…
THIS THING HAS MOVED! FIND IT AT Cults 3D! https://cults3d.com/en/3d-model/game/super-bomberman I recently bought Bomberman Live for my Xbox One and the memories came flooding back. I wanted a model to print but I could only find one tiny…
I found a bunch of different plans for a DIY no-fog coolant spray system for standard knee mills so I decided to make my own. These are the parts I designed to mount the spray tube to the spindle. I originally made the arms 6" long and…
Designed this to fit a 15.5mm OD pneumatic die grinder onto a CXA tool post on our Trak lathe. Holes are sized to fit 10-32 heat set inserts.
Our metal baby gate doesn't like to stay against the wall and as such it tends to swing outwards a bit. So I designed this clip to screw to the baseboard and hold the gate open. The clip opening is for 1/2" round bar and the base…
Stackable collet holders for ER20 collets
The little plastic latch that holds the door closed on our Backyard Discovery Oakmont swingset ( https://www.backyarddiscovery.com/products/oakmont-wooden-swing-set ) got broken so this a replacement part. It fits perfect and is twice as…
8" diameter, includes vent. Printed in ABS, 4 walls, 15% gyroid infill.
I designed these covers as I have had to replace one or both of these idlers every single year. Snow packs up inside the pulleys during use and then melts. The melt runs straight into the bearings where it sits all summer long rusting up…
I designed these to easily find the CG of my Flite Test Legacy V2. The Legacy V2 has two holes in the wing to support the plane to find the CG. Designed in three parts, print two of each then glue together. The clearances are a little…
I designed this adapter to mount my Quad Lock mag head to my ProClip phone mount. It reuses the original ProClip M3 countersunk mounting screws and has a recess in the back to press in a standard M5 nut for the Quad Lock mag head.…
I was tired of the telescoping bore gauges kicking around in the toolbox drawer so I whipped up this neat storage tray. It should fit most gauge sets as I wouldn't think they'd vary all that much in size. Each gauge has its own pocket and…
I needed a 16167 and a 12167 throw gauge for my Flite Test Legacy V2 so I made one up quick in Inventor Category: R/C Vehicles
I found occasionally when using the lathe that coolant would come out of the collet closer end of the headstock so I designed this little funnel to catch it and drain it back into the enclosure. You'll need some 1/4" ID hose and you'll…
I whipped up this stand to hold the Imperial set of Wiha T-handle allen wrenches. Includes storage bin on the back side. Body and text/logo are separate pieces for dual-color. Printed on an H2D with black and yellow ABS.
Print a pair of these (they fit diagonal on an Ender bed) and get some 6mm OD carbon tubes from Amazon. I used the carbon tubes to enlarge the original front hole. The rear is a little farther back than the original location but not by…
Teknic ASU-FR510 analog board mounting plates. Single and dual plate versions. For use with heat set inserts. One hole on the PCB isn't aligned with the other three. This mount takes that into account. Useful for mounting the unit to the…
We broke the arm that came on our unit and SuperTek quoted us 164 Euros for a replacement arm with insert (plus an M4 threaded nut) and 145 Euros for shipping. It cost us less than $0.20 of material to print a replacement one after I…
I was tired of my taps and drills rolling around the workbench when I have them out in use. So I whipped up these little trays to keep them where I need them. Imperial versions, sizes #10 through 3/8. Fits a tap and a standard jobber…
I noticed the 1" extrusion for the door on the lathe enclosure was just slightly longer than the lower gutter they include with the enclosure so I whipped these little gutters up to help keep coolant in the lathe and off the floor.…
½ through 1/32 DIN cutout templates. Quick print. Includes notches on X and Y centers for alignment. Opening is 0.5mm wider than the DIN standard to partially makeup for pen tip width. STEP and Inventor IPT files are included. Print in…
Parts bin for 2" T-slot extrusion
Made this tray to hold the Lyndex 5C collet wrench available at McMaster-Carr (P/N 3197A240)
I designed this to help keep coolant from splashing onto the floor while using the saw. It sits right on the length setting bar and catches the coolant from the right side nozzle. Edit 12/20/23: Made a V2. This version eschews the…
I wanted to mount my daughter's FT Airliner to the wall next to my Legacy V2 so I designed this little bracket. It has two holes for #8 screws and a notch for the nose gear wire to rest in. Print Settings Printer Brand: Creality Printer:…
I designed this to hold the screwdrivers, cabinet keys and Allen keys that came with our Tormach 15L Slant-Pro CNC Lathe. I also added a port for a USB stick for storage. This is designed to mount to the edge of your keyboard shelf with a…
I designed this flip-up cover for the Automation Direct 22mm lit start/stop combo buttons ( found here ). We had issues with operators occasionally hitting stop instead of the counter reset button which would shut down the line…
The production guys broke the handle off of the switch for our vent fan to I whipped one up real quick. Printed from ABS, 4 walls, 50% hexagon infill. 3 solid top/bottom layers. This was specifically for the Dayton 2X441A switch but…
Simple two-color tray with text for the SST 6" mill tram tool
These are all currently available results.
