Counting matching models…
I couldn't find a mag clamp that works with plastic PMAG brand mags. I made one to fit PMAG mags, I made the lip a bit longer then other ones, I added room for the cross pattern on the PMAG. It fits 95% like a glove (about the best I can…
spider-man light switch cover and out lit covers (rocker, single paddle double paddle and outlet covers) I do have a Gwen version
This is for the Avantage arms (conversion kit for glock to .22). It could be better, but this was a lot of work for my skill level. At this point I have only tested that is cycles ammo, I will range test it when I have time someday. I am…
Most out there are not the correct angle, so I made this one (Its close to correct Glock mag angle). I made a floor plate that fits this 3d printed mag(the oem base pad won't fit). The follower is just something I had around and have used…
Avantage arms magazine spring bender (conversion kit for glock to .22) Push the spring threw the hole about 4mm and bend at a 120 degree (to hold it in place under tension). The key is to hold the same tension as you move your hand down…
The lego guy is based on Lego Minifigure 4X by Technobly on Thingiverse: https://www.thingiverse.com/thing:3954301 I added some stuff to make it stronger and make the legs hold in place better. The hands are a mix from another lego guy…
Taurus PT92 / beretta 92 +2 mag base. Adds two more rounds and you can pick what color your mag is. ( I have a version that doesn't add any rounds if for some reason you don't want a few extra rounds) You will need to file some on the…
This is a grip for Taurus PT92 / beretta 92. The top grip screw will need to be replaced to a lower screw for it to work(top screw stays with the old grip). It is easy to remove the flowers if you want. I made it for my wife - so I will…
TaurusPT92 or beretta92 mag base pad. If you just want to change the color of your base pad use this one. To add 2 more rounds to your mag with your existing spring look at my other one. I have them on Mec-gar mags and works good. NOTE:…
This will get Advantage arms glock kit mag to hold 14 rounds(I do have a mod to hold 18 rounds, The only issue is the follower will not lock the slide open when mag is empty(V7 follower should fix this issue, but I have not tested it…
This will get Advantage arms Glock .22 kit mag to hold 18 rounds(only v7 is tested 100%). The only issue is the follower will not lock the slide open when mag is empty (V7 follower should fix this, but I have not tested it yet). Lower…
They work with OEM and other mags for me so far(not most 3d printed mags tho). I do have one made to fit my 3d printed mag. I print the locking tab at 98% 100% infill and it will need supports. V5 dose not have a locking tab to hold it in…
Avantage arms flat base pad (glock conversion kit to .22) this fits my printed mag. I only used it for testing, but some might want it. You will need to glue it in place. I have a version that adds extra rounds to the mag and has a…
ar15 mag clamp (TRIPLE version) This is made to clamp three pmag brand plastic magazines together with enough space to use all three(one at a time). This version is made for a 1/4-20(or 1/4-28) 3 inch long allen head bolts and nylock…
AR15 mount threw the mag port. A two and three bolt design. I used this for a year to mount my gun in place and it worked good.
Taurus PT92 / beretta 92 +2 mag base. Adds two more rounds and you can pick what color your mag is. You will need to file some on the locking tab before install. If you live in a (communist) state that has a limit of 10 rounds don't print…
This is something I did to have a gen4 style release button in a gen3 frame, The spring slot is a gen3 design with the size of the gen4 button on the outside. I printed one cut down just to mark the frame and two at slightly different…
nothing impressive but I have used it to keep my thumb drives from getting lost. a V8 engine was my inspiration.
I like to print helmets from movies and this was the best I could find at this time, but couldn't have it on a shelf, so I turned it into a display helmet. remix of https://www.thingiverse.com/thing:4338249
unicorn out lit and switch cover, paddle, rocker and outlet covers. Update outlet 3 had a issue, it is now fixed.
This is for the Avantage arms 3D printed magazine (conversion kit for glock to .22). This mag (like my one for OEM and 3d printed 9mm mag) uses a locking tab to hold it in place (the V-lock stl) To install the extended version you will…
It's a socket holder for GEARWRENCH 14 Pc. 3/8" Drive 6 Point Mid-Length Socket Set, Metric - 80554S It holds them good and no gap so it's about as short as you can get them. I have printed and used it at work for a few years now.
Taurus PT92 or beretta 92 mag base pad. If you just want to change the color of your base pad use this one. To add 2 more rounds to your mag with your existing spring, use my other one I have them on are Mec-gar mags and works good NOTE:…
NEX playground controller wall mount. It has one screw hole at the top to hold it in place.
Ghost spider (Gwen) light switch cover and out lit covers (rocker, paddle and outlet), This is easy to paint. I do have a spider-man version
stitch light switch cover and outlet covers in a few versions.
Ever want to shoot a golf ball from a potato gun? I made a spacer to fit in 2" black PVC pipe to shoot golf balls. Why - they go crazy far vs potato :) Use at your own risk!
This is made to fit my 3d printed glock mag, it adds 2 rounds, but I wouldn't ever fill it to 19 rounds myself. The follower or a glock follower will work, I have made a 3d printed follower that works good in this mag and other, you can…
Advantage arms flat mag base pad (fits Glock .22 slide kit) This version dose not add any more rounds to the mag like my other one, this one will just allow you to change the color of the base pad just for fun.
crows foot holder, a bit crude, but I have used it to hold my set in place for a few years now.
craftsman ignition wrench set holder SAE. It was a little bit of a tight fight, V2 is a little bigger and should cure that issue.
I wanted a oil sucker and I couldn't find a good metal one(harbor freight stopped making it), so I did what we all do here, and made one. It works good, the threaded part will need to changed to fit whatever solid container you plan on…
For a training tool on how to carry a load on a forklift. Toyota forklift forks (forks attachment, not adjustable). I don't think anyone needs it for this training tool, but if you want a paper weight and work at a forklift dealer it…
paint mixer to go on a 1/4 rod. I drilled a 1/4 rod and used some old 12 gauge wire I had around as a pin. Might want to print it 101-105% it was a tight fit on a 1/4 rod. I think this is a remix of some paint mixer I found years ago, but…
craftsman ignition wrench holder metric. It was a little bit of a tight fight, V2 is a little bigger and should cure that issue.
This just holds a set of colored tape in place nice. It keeps my tape organised in my tool box.
A venturi vacuum pump is a pneumatic device that generates suction using compressed air and the Venturi effect, eliminating the need for electricity or moving parts . My plan is to use this to prime the fuel system of diesel engines and…
This is a tool to clamp fuel lines. You will need to cut thread and bend a 1/4 rod. Extra parts list 1/4 rod washer(6mm) 1/4 wing nut. Note V3.2 fixed the one thin side wall and hole size issues. I still need to run a 1/4 drill bit down…
hellcat outlet cover The logo center right is made to be a ghost image
snap-on double rocker 6 point toolbox In time I will make covers with most tool logos on them
1/2 drive socket holder (metric), The cut version is in the picture, if you have a big enough print bed there is a version that is not cut.
Cap and plug set holder, it just keeps things nice in a toolbox.
A kids ring chart to use it as a reference to make rings for a kids fingers.
flat allen socket holder narrow version metric and SAE (the sae and mm version is based on my wider version of the harbor freight long allen and long pivot holders)
I wanted to make this the second I found it, but the hands rubbed against the TP role and I don't like to glue parts together, so I made a version that was lower profile, didn't rub the sides of the role and was bolted together(makes it…
This is a cheap and compact way to reduce the air flow (and kinda pressure) going into a air tool. I use it for my oil injector and oil sucking tools that are 3Dprinted and only handle 40-70psi. It goes inside the air chuck fitting…
halo light switch cover single outlet cover.
irwin countersink set 1/4" 3/8" 1/2" 5/8" 3/4" bits There is only a little play from the cap to the bits, so they don't clank around inside. The only bad part is this is to tall to fix in a toolbox.
This holds one or two mags for a M&P bodyguard. The two mag holder is a little big(prints a lot). The single mag holder is small enough a shirt covers it nice(I have not printed it yet tho).
hydraulic cap and plug holder JIC, this just keeps the toolbox nice and clean.
I made the cover one part, I made the inside cover 3mm thicker(spaced it from the wall enough spacers are not needed now), changed the size a bit to make things fit the way I wanted, I only changed the double version. NOTE: after printing…
fire extinguisher vacuum tool (oil sucker) This turns a old junk fire extinguisher (Kidde brand) into a oil sucking tool. You use a 1/4 (or other size hose) from the fire extinguisher fitting into a tank you need to drain out and add air…
This is a tool to press the seal 3.5mm into the axle hub(service manual spec). I used v1 and it was to tight so I made a v2 that should have the correct clearance from the axle housing. I will update the next time I replace a seal.
each box holds 10 sticks, you can print a few sets and it helps kids see the math problem.
flat allen socket holder wide version metric and SAE, this is for the harbor freight long allen and long pivot holders socket sets(standard and pivot sit in this one holder)
This is a simple holder for a milwaukee M12 grease gun, One end has tabs sticking out with holes in them that you can hook a rubber band with a hook on it to hold it in place if you want/need. V2 is stronger and taller, but I am still…
Bobcat (Equipment) outlet cover This is one color, I painted the black part.
spider-man and his friends double paddle cover
I made this version to fit in a small drawer in my toolbox, I like my other version better but this is a lower profile design. The cutout is for the nut that I weld to my cap and plugs to pull a hose threw a tight spot.
HUSKY thin wrench set holder, Could be wider, but it does works as is. V2 is a lot wider v3 is v2 with a longer base to keep it from falling over
this is for doing a brake job on a Toyota forklift without making a big mess. After pulling the axle shafts you install this plug to keep the diff oil from draining out.
fire extinguisher vacuum tool (oil sucker) This turns a old junk fire extinguisher (Amerex brand) into a oil sucking tool. You use a 1/4 (or other size hose) from the fire extinguisher fitting into a tank you need to drain out and add air…
spider-man miles morales (spin) single rocker
spider-man miles morales (spin) single outlet
fire extinguisher oil injector. This turns a old junk fire extinguisher (Kidde brand) into a oil injector tool, I plan to use this is to fill small tanks like a hydraulic tank that fills to slow with a oil funnel (like a pallet jack) You…
hellcat single rocker switch cover. There is a ghost image center right (so print at a layer height of .15 .2 will turn out rough)
Kobalt fan mister water bottle holder bottle V3 is to big and I had to adapt it to the fan side hose(I used a 1/4 hose to go over the barbed fitting and the fan side hose), V4 should fix the issue, but is not tested at this point (I will…
Closet maid and Everbilt brands of wall brackets for the clothes hanger and shelf versions (tested on closet maid 12" #37300, 4718 & everbilt 12") (angle and straight). The short ones are for shelf version. I needed brackets that were at…
This is for a basic 1/2 angle torque gauge tool holder, nothing fancy but it holds the tool nice.
I made a version that was lower profile(TP didn't stick out as much/ can fit a bigger role), hands fit tighter and didn't rub the sides of the role and my version is bolted together not glued. I extended the hands, but it might hold…
fits the walmart bestway 16ft round pool good. This is used on the out side of the sand filter to the return of the pool.
bestway pool T fitting support (with holes for cable ties), I just made the arms a little thicker and added holes for cable ties(zip ties) to hold the fitting to the support bracket. It fits the 16ft round pool supports perfict.
spider-man and his friends double paddle cover
Cat TP holder v3 (quiet version) This is a remix of my cat TP holder, but it uses a spring to hold the role in place (it won't rattle around like my other version) It uses a 3mm square nut and a 3mm 10mm long allen head bolt. A spring is…
TP dog version (Golden retriever) This is a remix of my cat TP holder, but it uses a spring to hold the role in place (it won't rattle around like my first cat version) It uses a 3mm square nut and a 3mm 10mm long allen head bolt. A…
This turns a old (junk) Ameraex brand fire extinguisher into a oil injector. Its used to fill a tank that is slow to fill with a funnel (like a hydraulic tank on a pallet jack). You add fluid to the tank and add LOW pressure to the port…
bobcat equipment triple rocker switch cover
ghost spider (web version 2) double paddle (short version of web 1)
ghost spider (version 2) double paddle
catapult bushing only (bushing instead of two bearings) to use on
Bobcat (Equipment) double paddle cover center cat version
bobcat double paddle left cat version
bobcat single paddle large version
wasp trap using a old Sodastream syrup bottle with the big neck.
ghost spider (web version 3) double paddle
spider-man (web version) double paddle
spider-man (short web version) double paddle
spin, Miles Morales, spider-man (web version) double paddle
spin, Miles Morales, spider-man (web 2 version) double paddle
spin, Miles Morales, spider-man (web 3 version) double paddle
spin, Miles Morales, spider-man (web 4 version) double paddle
spidey and his amazing friends (round version) double paddle
web light switch cover tall version
web light switch cover short version
These are all currently available results.
