P
PrintablesKN16
Adjustable Stock for AR
Very detailed instructions can be found in the PDF file under “Other Files”.
- Downloads
- 3,010
- Likes
- 417
- Rating
- 0
All models
Counting matching models…
P
PrintablesKN16
Deadpool Mini
God's perfect idiot' only smaller. .12 layers with supports. Collect the all! Stan Lee Batman (1966 Style) The Joker Blade the Daywalker X-Men's Beast Daredevil
- Downloads
- 2,839
- Likes
- 516
- Rating
- 4.93
P
PrintablesKN16
PP MCXish Folding Brace
A folding pistol brace inspired by the legendary Sig Sauer MCX Thin Folding Stock. It attaches to anything with a Picatinny rail and is a stylish accessory to your favorite PDW. There are detailed printing and assembly instructions under…
- Downloads
- 2,730
- Likes
- 214
- Rating
- 5
P
PrintablesKN16
Alien Chestburster
It's HUGE! It stands about 6 inches tall. It's semi coiled and if it could be stretched out it would be over a foot long. This makes it life-size! You'll need supports and you'll need them dialed in well!
- Downloads
- 1,518
- Likes
- 198
- Rating
- 5
P
PrintablesKN16
Batman Mini
I'm Batman. Adam West style! One piece or multi part. .12 layers with rafts and supports. Depending on your printer setup the multi piece model may require some post processing sanding. Collect them all! Stan Lee The Joker Blade. The…
- Downloads
- 1,394
- Likes
- 441
- Rating
- 5
P
PrintablesKN16
M-LOK Rail Covers and Matching Handbrakes
Like options? This set of files has a lot of them! The matching looks makes them look great. The ability to pick the exact size for your needs makes them work great! The sizes 1, 2, 3, 4 relate to number of M-LOK slots that the cover or…
- Downloads
- 1,356
- Likes
- 424
- Rating
- 4.83
P
PrintablesKN16
Magpul AFG Clone - Picatinny Rail
Print this with supports to the build plate only to handle bridging on the underside of the p-rail attachment area. PETG or PLA+ recommended for durability and heat resistance. Affixing AFG to Picatinny Rail: Vertically, you can affix…
- Downloads
- 1,260
- Likes
- 260
- Rating
- 4.8
P
PrintablesKN16
Wet Noodle AR Grip
Everyone loves to get their noodle wet! Here's Middleton's Wet Noodle in a variety of textures, Download and follow the instructions in Other Files.
- Downloads
- 1,252
- Likes
- 127
- Rating
- 5
P
PrintablesKN16
Giant Squid Flexi
This is an all in one print that fits on a 235 cm X 235 cm or larger bed. You will have to have good adhesion as it's 163 individual pieces. Print the first few layers a bit slower than normal and check it to make sure you have a good…
- Downloads
- 1,171
- Likes
- 119
- Rating
- 4.83
P
PrintablesKN16
Trilobite (articulated)
Am articulated trilobite model.
- Downloads
- 1,167
- Likes
- 247
- Rating
- 4.86
P
PrintablesKN16
Olaf from Disney's Frozen
Olaf can be printed as a complete figure with supports. It can be printed in parts without supports. The body can be printed with the hair or he can be printed as separate parts. Printing the figure as separate parts requires gluing to…
- Downloads
- 1,132
- Likes
- 87
- Rating
- 5
P
PrintablesKN16
Smoke for benchy
Smoke for Benchy's funnel. Print upside-down with supports. Use a fine detail setting.
- Downloads
- 1,029
- Likes
- 246
- Rating
- 4.82
P
PrintablesKN16
MLOK Rail Covers (5.5") and Handstop
MLOK 5.5" rail guards and handstop for any MLOK series handguard. STL files and Solidworks files for each part attached. Use Supports touching buildplate only.
- Downloads
- 972
- Likes
- 201
- Rating
- 5
P
PrintablesKN16
Threaded Harlot Barrel with 1/2-28 RH Thread
A Harlot barrel with 1/2-28 right hand threads. There is also a file for a ½-28 thread protector. The original designer worried about the weight of a muzzle device on the end of the barrel. Well fitting parts and a quality barrel latch…
- Downloads
- 939
- Likes
- 40
- Rating
- 0
P
PrintablesKN16
Orca
lovely Orca! Easy to assemble with glue. Enjoy! :) Kudos to the original artist! Print Settings Printer: snapmaker 2.0 A250 Rafts: Doesn't Matter Supports: Yes Resolution: 0.08 Infill: 15% Filament brand: ESUN Filament color: Black&White…
- Downloads
- 919
- Likes
- 149
- Rating
- 5
P
PrintablesKN16
Mickey Mouse Pumpkin
Somewhat low-polly but, I scaled mine up to be 6 inches tall with no issues. Print with tree supports off build plate only. Add a tealight candle and enjoy!
- Downloads
- 789
- Likes
- 65
- Rating
- 4
P
PrintablesKN16
Disk Shooter
A 6-Shot Disc Shooter that launches discs over 8 meters! 6-Shot Magazine: Experience continuous fun with swift and hassle-free reloading. Has a thumb lever so that it is much easier for one hand to hold open the disc holder while the…
- Downloads
- 767
- Likes
- 56
- Rating
- 5
P
PrintablesKN16
Free Harlot (Engraved)
Free? IDK. That's what the designer chose to name it. It is super cool though. Engraving and derringers go together like peanut butter and jelly! Get the remaining files from the original Harlot and read the instructions!
- Downloads
- 758
- Likes
- 31
- Rating
- 0
P
PrintablesKN16
Strider Padded Grip (AR-15)
Use PLA+ or better. Print Settings: Layer Height: .16mm Walls: 5 or more Infill 32% or more Use supports Non-Printed Hardware Needed: 1x Allen Head Screw, 1/4-28 x 1" 1x Steel Star Washer 1x Safety Selector Detent Pin 1x Safety Selector…
- Downloads
- 714
- Likes
- 69
- Rating
- 0
P
PrintablesKN16
Rail Grip, Rail Cover and Hand Stop
Rail covers and a handstop. 20mm and 80mm spacing so will work with both M-Lokk and Keymod. Cover in 5.5 and 3.5 inch versions. Print with supports on buildplate only.
- Downloads
- 709
- Likes
- 97
- Rating
- 5
P
PrintablesKN16
Printable Altoids Tin
Need an Altoids tin? Don't have one? Print this one!
- Downloads
- 705
- Likes
- 163
- Rating
- 3.83
P
PrintablesKN16
Alien (Xenomorph) Egg
Makes a great pen holder, planter or display piece. Print as is. File has designed in supports. Print in any color. Prime and paint as desired. Other great “Alien” Printables… Jonesy & the Xenomorph Mini Alien Chestburster Xenomorph…
- Downloads
- 704
- Likes
- 120
- Rating
- 5
P
PrintablesKN16
Sperm Whale
The ocean's largest predator. Supports will be required. If you'd rather print without supports try THIS ONE .
- Downloads
- 689
- Likes
- 63
- Rating
- 5
P
PrintablesKN16
Charge Handles Glock 17/19
Not everyone is blessed with the same strength of gription! (Yea I know I made that word up.) Print out of a strong filament (PLA+ or better) at 100%. Print as they appear on the build plate with supports off build plate only. These have…
- Downloads
- 656
- Likes
- 55
- Rating
- 0
P
PrintablesKN16
Adjustable Phone holder
This adjustable phone holder can hold your phone at any angle that you find comfortable. Printing: Print with the orientation that appears on the slicer. All parts at 15% infill except for the crank. The body and the gear do not need…
- Downloads
- 655
- Likes
- 81
- Rating
- 0
P
PrintablesKN16
Clamps
Print in place! No supports! Clamp A - Similar to a standard “spring” clamp. Size: Height 145 mm (5.7”). Clamp opening: 80 mm (3.2”). Clamp reach: 52 mm (2”) . Clamp B - Similar to a standard “photo” clamp. Size: Height 145 mm (5.7”).…
- Downloads
- 650
- Likes
- 277
- Rating
- 4.71
P
PrintablesKN16
High Quality Needlenose Pliers
These are great for precision work. They can be surprisingly strong but clearly are not for high stress work. They have the advantage of being non-conductive if you're using them in conjunction with electronics projects. Print with 5 or…
- Downloads
- 588
- Likes
- 104
- Rating
- 4
P
PrintablesKN16
Sauerkraut V2 Folding Brace and Stock
Download and follow the instructions under Other Files.
- Downloads
- 578
- Likes
- 51
- Rating
- 0
P
PrintablesKN16
Scooby Doo
Scooby separated to be able to print in different colors from any printer! He stands about 8 ¼ inches tall. There may be some post processing filing on some pieces. The spots should pop in and stay in on their own. The head and body are…
- Downloads
- 569
- Likes
- 133
- Rating
- 5
P
PrintablesKN16
Improved SG22 Lower
The original design that had a large opening that could potentially let debris inside the operating mechanism. This version closes that up to only what is necessary.
- Downloads
- 562
- Likes
- 58
- Rating
- 0
P
PrintablesKN16
Mini Yoda
Another mini, this time Yoda! Print this you must, joy it will bring you hmmmmm. EDIT #1: Added a mold, as requested. Print Settings Rafts: No Supports: Yes Resolution: 0.2mm Infill: 15% Note: He is 130 mm tall, so you may want to scale…
- Downloads
- 539
- Likes
- 65
- Rating
- 5
P
PrintablesKN16
Picatinny Rail Sling Attachment
A sling mount or gun charm hanger for picatinny rail. Excellent design, very strong. The best one can ask for from a 3D print. Use an M3 screw and nut to secure it to the rail,
- Downloads
- 539
- Likes
- 47
- Rating
- 5
P
PrintablesKN16
High Quality 90° Needlenose Pliers
These are great for precision work. They can be surprisingly strong but clearly are not for high stress work. They have the advantage of being non-conductive if you're using them in conjunction with electronics projects. Print with 5 or…
- Downloads
- 537
- Likes
- 180
- Rating
- 5
P
PrintablesKN16
Mini Mecha Godzilla
Mecha Godzilla was a bad guy (or bad robot) of extraterrestrial origin. Print with supports. Collect them all! Godzilla King-Kong Gamera Rodan Mothera Anguirus King Ghidorah
- Downloads
- 524
- Likes
- 73
- Rating
- 4.5
P
PrintablesKN16
1/2 x 28 Thread Protector
Don't let your threads be nekid! layer-height: 0.14 support: no infill: 100% walls: 8
- Downloads
- 523
- Likes
- 42
- Rating
- 0
P
PrintablesKN16
Mini King Ghidorah
King Ghidorah, a dragon for the modern era was a bad guy known not to like Godzilla, Rodan or, Mothra! Print with supports. Collect them all! Godzilla King Kong Gamera Anguirus Rodan Mothera Mecha Godzilla
- Downloads
- 493
- Likes
- 69
- Rating
- 5
P
PrintablesKN16
DB-Shadow AR Grip
This is a great little AR grip that lets you use CZ Shadow pattern grip panels on an AR-15 patterned gun. Additionally, there are two separate grip panels - a blank set and a dotted set. From there you can modify and stipple to your…
- Downloads
- 478
- Likes
- 44
- Rating
- 0
P
PrintablesKN16
M-Lok AFG
AFG designed for mounting on M-Lok rails. I have one model with locating tabs and one without for bed adhesion/support reasons. Attach to your M-Lok rail with two 8-32 x .5" button head cap screws and hex/square nuts. The screw length is…
- Downloads
- 460
- Likes
- 64
- Rating
- 4.5
P
PrintablesKN16
Lower Parts Kit Storage Box
Parts is parts. Now you have a place to store them!
- Downloads
- 445
- Likes
- 96
- Rating
- 5
P
PrintablesKN16
Mini Godzilla
Godzilla, King of the Monsters as he appeared in 1954 munching on a train! Print with supports. Collect them all! King-Kong King Ghidorah Gamera Anguirus Rodan Mothera Mecha Godzilla
- Downloads
- 431
- Likes
- 68
- Rating
- 5
P
PrintablesKN16
Killer Sights
Non-Printed Parts: - 4x M5x30 SHCS's - 4x M5 Nuts - 1x M3x40 SHCS - 1x M3x20 SHCS - 2x M3 Nuts - 1x AR-15 Buffer Detent Spring Front Sight Assembly: 1 - Install Front Sight Frame on rail with 2x M5 nuts and bolts 2 - Insert AR-15 buffer…
- Downloads
- 412
- Likes
- 78
- Rating
- 0
P
PrintablesKN16
Christmas Nativity
If you're looking for a smaller nativity scene but most of the smaller ones are too small here's what you need. The base is about 1 ½ X 4 inches. Makes a great Christmas gift.
- Downloads
- 410
- Likes
- 78
- Rating
- 5
P
PrintablesKN16
Build A Bug
The original design came from a company that made 3D printer parts. Sadly they've gone out of business. There are five basic models: Ant Fly Praying mantis Scorpion Spider A flexible filament like TPU is the best choice to build your bug.…
- Downloads
- 409
- Likes
- 148
- Rating
- 3.33
P
PrintablesKN16
Danny Meatball's Triangle Stock System
A wide assortment of fixed & folding stocks & braces for picatinny and AK mounts. Detailed instructions located in the “Other” files download.
- Downloads
- 388
- Likes
- 76
- Rating
- 0
P
PrintablesKN16
The Space Cowboy AR Grip
Go crazy…. Mix and match colors! Change the panel when you get bored! Change the panel when you have filament to use up! Also included are the hex textured grip panels by Slimjim240B. Print Settings for the grip Use: PLA+ or better…
- Downloads
- 384
- Likes
- 61
- Rating
- 5
P
PrintablesKN16
Mini Battleship Game
Small enough to fit in an Altoids tin! The pins are he made out of 1.75mm Filament cut to 10 mm Long. Don't have an Altoids tin? Print this one!
- Downloads
- 366
- Likes
- 268
- Rating
- 0
P
PrintablesKN16
CMMG Bolt Case With Slide Cover
This is a case that will hold the CMMG 22LR conversion bolt for an AR-15. It also doubles as a regular Bolt carrier group case as well. The Bolt is almost a perfect fit and very little wiggle room. If you want more clearances for the bolt…
- Downloads
- 358
- Likes
- 30
- Rating
- 0
P
PrintablesKN16
Ursula Flexi (Little Mermaid)
Get a good first layer and print without supports. Commercial licenses available. Contact the original designer.
- Downloads
- 355
- Likes
- 44
- Rating
- 5
P
PrintablesKN16
High Quality 45° Needlenose Pliers
These are great for precision work. They can be surprisingly strong but clearly are not for high stress work. They have the advantage of being non-conductive if you're using them in conjunction with electronics projects. Print with 5 or…
- Downloads
- 354
- Likes
- 90
- Rating
- 5
P
PrintablesKN16
Pteranodon Skull
Lay the stand flat. Orient it so it's facing corner to corner. Decide on how big your printer will allow you to print it. Stand the skull up and rotate it to 45 degrees. Enlarge it to match your stand. Enjoy!
- Downloads
- 348
- Likes
- 142
- Rating
- 5
P
PrintablesKN16
C69 AR Grip
An AR style grip modeled after the grip of a C96 (Construktion 96) Mauser by the talented, Laffs Dynamics. This was the gun used to build the DL-44 Blaster prop used by Han Solo in the Star Wars movies so, it is quite suited to use in…
- Downloads
- 346
- Likes
- 35
- Rating
- 0
P
PrintablesKN16
The Joker Mini
Jingle bells, Batman smells Robin laid an egg Batmobile lost a wheel And Joker got away…. Single or multi-piece. Depending on your printer setup the multi-piece model may need some post processing sanding. Collect them all! Stan Lee…
- Downloads
- 334
- Likes
- 103
- Rating
- 0
P
PrintablesKN16
Minisaurs
Well printed Minisaurs have jaws that will snap closed when you hold the tail and flick the legs and are great little helpers around home and / or in the workshop or office as a peg / clip / clamp. They have a huge bite relative to their…
- Downloads
- 333
- Likes
- 84
- Rating
- 5
P
PrintablesKN16
Nike Hercules Missile
Nike Hercules Missile 140th Scale With Launcher/Display Stand The Nike Hercules ground-to-air missile was deployed in many parts of the world including the continental United States throughout the cold war. It was phased out when the…
- Downloads
- 325
- Likes
- 35
- Rating
- 5
P
PrintablesKN16
Camo Harlot
Parts to make a Harlot with Camo stippling. Get the remaining files from the original Harlot and read the instructions!
- Downloads
- 314
- Likes
- 23
- Rating
- 0
P
PrintablesKN16
Typewriter Grip Picatinny
Get that St. Valentines Day vib….. Filament PLA+ or better Layer Height .16mm Walls 6+ Infill 32%+ Print the AFG upside down with supports. Use support blockers as the inside of the foregrip is semi-hollow. Non-Printed Hardware Needed: 2x…
- Downloads
- 290
- Likes
- 44
- Rating
- 0
P
PrintablesKN16
Jonesy & the Xenomorph Mini
In space no one can hear you meow. At 100% the zenomorph is 5 inches tall and the optional display deck is 8 X 5. OK, this alien is cute but it's Ugggggggggggly to slice. It's possible as you can see it printed in the picts. Your support…
- Downloads
- 279
- Likes
- 62
- Rating
- 3.5
P
PrintablesKN16
DL-44 Flash Suppressor Threaded for 1/2" x 28
A replica of the muzzle device on Han Solo's DL-44 Blaster. It is set up to work with 1/2" x 28 threads. it will thread onto AWCY's Proto Barrel ends (available elsewhere). Either the "One Part Option - Permanent" or the “Two Part Option…
- Downloads
- 277
- Likes
- 28
- Rating
- 0
P
PrintablesKN16
Homer's Harlot
Custom side panels for a Harlot. Remixed from the original Harlot. Get the remaining files from the original Harlot and read the instructions!
- Downloads
- 276
- Likes
- 23
- Rating
- 0
P
PrintablesKN16
M1913 Fixed Stock
Where's the beef !?!?! Right here! If other printed stocks have let you down this beast is designed to last! Use PLA+ or better. 6 walls. 50% infill or better. Non printed parts - Two m4 screws and nuts. Buttstroke to the head! Move!
- Downloads
- 270
- Likes
- 17
- Rating
- 0
P
PrintablesKN16
G22 Upper - Reinforced
The original had walls around the charging handle recess were only 2 thick. This remix reinforces that section for improved rigidity. Print orientation threads up or down.75 to 100% infill. .2 layer height with support.
- Downloads
- 268
- Likes
- 30
- Rating
- 0
P
PrintablesKN16
Jaws Attack on Benchy - Split model
I wanted to print this shark attacking the famous benchy in color - but as usual the overhead time for swapping filament in the MMU2S kind of kills the enthousiasm of attempting that. I splitted the model and created a generous tolerance…
- Downloads
- 265
- Likes
- 52
- Rating
- 0
P
PrintablesKN16
Danny Meatball's Adjustable Stock
Danny’s Adjustable Stonk is a Chonky stonk that allows 6 adjustable positions! Folding and, fixed options available as well as three different cheek risers! It attaches to a picatinny rail. Detailed instructions are included in the PDF…
- Downloads
- 263
- Likes
- 42
- Rating
- 4
P
PrintablesKN16
Stan Lee Mini
Stan the man lee! Multi piece model. .12 layers at 30% or better infill. (some parts may be weak if you print too light. Depending on your printer setup the model may need some post processing sanding. Collect them all! Batman (1966…
- Downloads
- 258
- Likes
- 116
- Rating
- 0
P
PrintablesKN16
Mini Gamera
Gamera, the improbable flying turtle started as a bad guy but, eventually became known as a friend of the children! Print with supports. Collect them all! Godzilla King Kong King Ghidorah Anguirus Rodan Mothera Mecha Godzilla
- Downloads
- 254
- Likes
- 50
- Rating
- 5
P
PrintablesKN16
Colt 607 Style Carbine Stock
An AR15 stock that fits on a mil spec carbine buffer tube and is the same general shape as a colt 607 carbine. It requires a Magpul MAG333 Sling Mount Kit, a QD sling swivel, and a 5/16-18 socket head screw with 30mm of threads to work…
- Downloads
- 253
- Likes
- 26
- Rating
- 0
P
PrintablesKN16
Fitzbenchy
The legend lives on from the Chippewa on down Of the big lake they call 'Gitche Gumee' The lake it is said, needs a Benchy… (Apologies to Gordon Lightfoot) This thing really hauls! The original design was very short and skinny. I remixed…
- Downloads
- 242
- Likes
- 56
- Rating
- 5
P
PrintablesKN16
MLOK QD Sling Swivel Mount
MLOK QD Sling Swivel Mount by DB Firearms. This utilizes QD Socket Heat Inserts by Hyperion 2A Print with PLA+ or better. CF Nylon would be the best for a long lasting piece. Though these have been known to withstand over 200lbs of force…
- Downloads
- 233
- Likes
- 31
- Rating
- 5
P
PrintablesKN16
Glory Harlot
Here are the parts that with the right application of paint will let you create one star spangled banner of a Harlot! Get the remaining files from the original Harlot and read the instructions!
- Downloads
- 231
- Likes
- 15
- Rating
- 0
P
PrintablesKN16
CMMG Bolt Case With Slip Cover
This is a case that will hold the CMMG 22LR conversion bolt for an AR-15. It also doubles as a regular Bolt carrier group case as well. The Bolt is almost a perfect fit and very little wiggle room. If you want more clearances for the bolt…
- Downloads
- 230
- Likes
- 28
- Rating
- 5
P
PrintablesKN16
22LR Cartridge Carrier
Here's the perfect way to carry pews for your 22LR Harlot, a single shot survival rifle or, the like. It clips to your belt for easy access. Assembly instructions and non printed parts are included in the drawing. The drawing is also…
- Downloads
- 226
- Likes
- 33
- Rating
- 0
P
PrintablesKN16
Power Bank With USB Type-C Delivery
Power Bank. USB C in and out. USB out. 18W. Optional 3 or 5 cells. If you can solder, this is an easy project and with the right parts very cost effective. Decide if you want the 3 or 5 cell version and print the 3 parts. Non printed…
- Downloads
- 223
- Likes
- 60
- Rating
- 0
P
PrintablesKN16
Shark Fin M-Lok Handstop
Admit it…. The music is already playing in your head. Filament PLA+ or better Layer Height: .16mm Walls 6+ Infill: 38%+ Print upside down with supports. Non-Printed Hardware Needed: 2x M5x10 Hex Socketed Machine Screw/Bolt 2x M-Lok T-Nuts…
- Downloads
- 217
- Likes
- 26
- Rating
- 0
P
PrintablesKN16
Paracord Handle Clips For Molle Straps
These clips can be used to add paracord straps to any bag with 1 inch molle straps. Designed to have 4 passes of 550 paracord through it. No supports. 0.2 resolution. 50% or better infill. PLA+ or better filament. There are instructions…
- Downloads
- 216
- Likes
- 67
- Rating
- 0
P
PrintablesKN16
Typewriter M-Lok AFG
Get that St. Valentines Day vib…. Filament PLA+ or better Layer Height .16mm Walls 5+ Infill 25%+ Print the AFG upside down with supports. Use support blockers as the inside of the foregrip is semi-hollow. Non-Printed Hardware Needed: 3x…
- Downloads
- 212
- Likes
- 33
- Rating
- 0
P
PrintablesKN16
The Florist Harlot (Engraved)
An engraving pattern that would look perfect in the vest pocket of an old west gambler. Get the remaining files from the original Harlot and read the instructions!
- Downloads
- 208
- Likes
- 11
- Rating
- 0
P
PrintablesKN16
Wood Grain Harlot
A wood grained Harlot? Well it's unconventional but, why not? Get the remaining files from the original Harlot and read the instructions!
- Downloads
- 202
- Likes
- 15
- Rating
- 0
P
PrintablesKN16
No Step Snake Harlot
FREEDOM! Custom side panels for a Harlot. Remixed from the original Harlot. Get the remaining files from the original Harlot and read the instructions!
- Downloads
- 201
- Likes
- 18
- Rating
- 0
P
PrintablesKN16
Sauerkraut Folding Brace
Download and follow the instructions under Other Files.
- Downloads
- 201
- Likes
- 26
- Rating
- 0
P
PrintablesKN16
War Caster (Adjustable Bipod)
The developer, “Blinsky's Toys” continues to spread joy throughout the world by bringing you a brand new toy. The “War Caster” is an adjustable bipod designed to attach to a picatinny rail and fold out of the way for storage. That means…
- Downloads
- 192
- Likes
- 19
- Rating
- 0
P
PrintablesKN16
Printable Carry Handle and FSB
Print for strength. 6+ walls, 99-100% infill. Print in the orientation that they load. Supports on build plate required. Install Using 4 M4x35mm Bolts and Nuts. Front Sight Post is a 3mm x 25mm Steel dowel Don't shoot your eye out.
- Downloads
- 189
- Likes
- 47
- Rating
- 0
P
PrintablesKN16
Harlot Stand
Display your Harlot with pride, alone or in pairs! Kudos to the original designer!
- Downloads
- 184
- Likes
- 14
- Rating
- 5
P
PrintablesKN16
Mini King Kong
King Kong doing what he does best… interfering with air traffic! Print with supports. Collect them all! Godzilla King Ghidorah Gamera Anguirus Rodan Mecha Godzilla Mothera
- Downloads
- 179
- Likes
- 29
- Rating
- 5
P
PrintablesKN16
The Poverty Pedal
A gas pedal that can be attached to any pistol with a picatinny accessory rail! Included is an option to add muzzle weight. By Internetpizza. Hardware: 2x M5x35 button-head cap screws 2x M5 Nuts 3/8" Tungsten Pinewood Derby Weights…
- Downloads
- 177
- Likes
- 39
- Rating
- 0
P
PrintablesKN16
Carrying Case, Large, Fully Printed.
The original designer designed this to carry his Rubik's Cube solving robot. That said I'll bet you could find a hundred uses for this carrying case. I know I can! YOU WILL NEED A LARGE FORMAT PRINTER such as the Artillery 3D Sidewinder…
- Downloads
- 171
- Likes
- 62
- Rating
- 0
P
PrintablesKN16
AFG 4 inch handguard
I modified the original model, in order to make it shorter and cut out a slot so that it would fit a M-Lok handguard with only one M-Lok slot. I also changed the front M-Lok locator tabs to something more-closely resembling the official…
- Downloads
- 169
- Likes
- 35
- Rating
- 0
P
PrintablesKN16
Sperm Whale No Support
Two piece Sperm Whale sculpture that is divided so that it can be printed without supports and, then glued together. If you don't mind using supports try THIS ONE .
- Downloads
- 168
- Likes
- 20
- Rating
- 5
P
PrintablesKN16
Maggie Simpsons' Harlot
Watch out Mr. Burns! Custom side panels for a Harlot. Remixed from the original Harlot. Get the remaining files from the original Harlot and read the instructions!
- Downloads
- 166
- Likes
- 19
- Rating
- 0
P
PrintablesKN16
T-Rex Muzzle Brake Cover
T-Rex skull that will fit over muzzle brakes with 13/16-16 outer threads. 0.2 resolution. PLA+ or better.. 6+ Walls. 100% infill. Tree supports off print bed. Use with care. Do not shoot your eye out.
- Downloads
- 163
- Likes
- 19
- Rating
- 5
P
PrintablesKN16
Benchy Filament Holder
A decoration for one of your Benchies and a key chain option. No supports. 15% infill. 0.2 layers for all parts except the filament which should use 0.01 for more detail. Setting the layer pattern to “concentric” will yield a cleaner…
- Downloads
- 160
- Likes
- 49
- Rating
- 5
P
PrintablesKN16
SG22 Handel w P Rail.
SG22 Carry Handle with picatinny rail and fixed sights. 8.36 inches long, ideal for smaller printers. Open handle is easy to grip. Mount with 2 M4 screws and nuts, or similar in SAE
- Downloads
- 159
- Likes
- 19
- Rating
- 5
P
PrintablesKN16
Three 15mm Screamer/Bird Banger to 37mm Adapter
This lets you fire the 15mm flares or scare cartridges (screamer, whistle, banger etc) from a 37mm launcher simultaneously. there is a slot for a rubber band that will hold them in place so they don't all fall out if tipped. you simply…
- Downloads
- 159
- Likes
- 23
- Rating
- 0
P
PrintablesKN16
Daredevil Mini
What, are you blind? Single or multi piece figure. .12 layers with rafts and supports. Depending on your printer setup the multi-piece figure may need some post processing sanding to get everything to fit. Collect them all! Stan Lee…
- Downloads
- 158
- Likes
- 46
- Rating
- 0
P
PrintablesKN16
Air Stripper for air rifles.
My take on the Air Arms MPR air stripper, threaded with 1/2" unf. All of my rifles are .177/4.5mm so this is designed for them, but you can alter the calibre to .22 or .25. There is also two 3mm holes for grub screws if required. Print…
- Downloads
- 148
- Likes
- 16
- Rating
- 5
P
PrintablesKN16
Z-REX
No support required... just print it with at least 3 shells and 50% or more infill to make the jaws / mouth springy so they open and close. At standard scale Z-REX's are 125mm long. You can safely uniformly scale them up (as this will…
- Downloads
- 147
- Likes
- 42
- Rating
- 0
P
PrintablesKN16
Scooby Snack Cookies
Scooby snacks! What more needs to be said! Smaller than I usually make cookies just in case you want to feed them to people with smaller hands! You can find all of my unique cookie cutters HERE!
- Downloads
- 140
- Likes
- 23
- Rating
- 0
P
PrintablesKN16
Sea Scorpion - Eurypterus
An extinct form of sea life that will look great hanging out next to your trilobites if you have a need for something like that!
- Downloads
- 140
- Likes
- 27
- Rating
- 5
P
PrintablesKN16
Picatinny Buffer Plug For Hoffman Lower
This is a Buffer plug designed to work with Hoffman lowers. It will work with other lowers but, it may not blend in as well. It is beefed up version of Maverick0197's plug by Scott_Tx. The M4 bolt has more material between it and the…
- Downloads
- 134
- Likes
- 29
- Rating
- 0