P
PrintablesPerfecT
Castle Desk Organizer
Print Settings: Layer Height: 0.2mm. Nozzle: 0.4mm. Infill: 10%. Perimeters: 3 Walls. Material: PLA. Support: Required. Bed adhesion: No.
- Downloads
- 1,192
- Likes
- 391
- Rating
- 4.5
All models
Counting matching models…
P
PrintablesPerfecT
Barrel Money Box - No MMU/AMS Needed!
Fits most coins. Print Settings: Layer Height: 0.2mm. Nozzle: 0.4mm. Infill: 10%. Perimeters: 3 Walls. Material: PLA. Support: No Bed adhesion: No.
- Downloads
- 266
- Likes
- 87
- Rating
- 5
P
PrintablesPerfecT
Pool Table
Ever wanted a nice game while in the pool? This might be the solution for you! It can float, but better be placed on solid ground to avoid unwanted ball movement. The balls are intentionally low poly, to reduce unwanted rolling. Print…
- Downloads
- 221
- Likes
- 53
- Rating
- 0
P
PrintablesPerfecT
Paper Clip With Label Holder
Use a printed or handwritten note (cut to size) for the text. Print Settings: Layer Height: 0.2mm. Nozzle: 0.4mm. Infill: 10%. Perimeters: 3 Walls. Material: PLA. Support: No. Bed adhesion: No.
- Downloads
- 120
- Likes
- 22
- Rating
- 5
P
PrintablesPerfecT
Arduino Project Box
Recommended - Print with these tweezers: https://www.printables.com/model/1780350-tweezers-for-led For soldering: https://www.printables.com/model/1767702-soldering-holder-with-component-tray Print Settings: Layer Height: 0.2mm. Nozzle:…
- Downloads
- 117
- Likes
- 15
- Rating
- 0
P
PrintablesPerfecT
Navy Cannon Set - All The Firing Tools!
Use glue for securing the parts together. Connect the sponge, screw, and rammer - each to it's own rod. Some sanding might help if needed. You can see on YouTube how these old guns were used. Print Settings: Layer Height: 0.2mm. Nozzle:…
- Downloads
- 107
- Likes
- 64
- Rating
- 0
P
PrintablesPerfecT
Pool Tiles Cleaner - Surfboard-Shaped
Be sure to print the hairs as overhangs. Use a knife carefully to remove the thin wall so the brush can be used. Print Settings: Layer Height: 0.2mm. Nozzle: 0.4mm. Infill: 10%. Perimeters: 3 Walls. Material: PETG/ASA (PLA can work, but…
- Downloads
- 105
- Likes
- 14
- Rating
- 0
P
PrintablesPerfecT
Cable Chain - High Quality
Connect the chain to your project with screws/glue/zip ties. For screws, M3 threaded inserts can help. Comment if you need a specific size of cable chain. Ideally, one in every couple of chain links should be with slots for zip ties - for…
- Downloads
- 65
- Likes
- 9
- Rating
- 5
P
PrintablesPerfecT
Wooden Crate
These wooden crates are 5cmx5cm. Scaling them is possible if you need a different size of box. The crates are stackable. Print Settings: Layer Height: 0.2mm. Nozzle: 0.4mm. Infill: 10%. Perimeters: 3 Walls. Material: PLA. Support:…
- Downloads
- 64
- Likes
- 6
- Rating
- 5
P
PrintablesPerfecT
Harbor Crane - Functional!
Some sending might be needed. You will need to use a drill bit for removing hole supports. Some force needs to be applied when connecting parts. You will need some glue for securing the parts. For cables, use a thin string. Use something…
- Downloads
- 50
- Likes
- 15
- Rating
- 0
P
PrintablesPerfecT
Storage Container Ship
This model ship is used for storing items in removeable containers. Add or remove center sections for more or less storage space. Containers can stack vertically. You can store items in the containers and in the closed hull of the ship.…
- Downloads
- 45
- Likes
- 5
- Rating
- 0
P
PrintablesPerfecT
Secure Cable Clip - Fits 6 Cables!
You an use this clip in any situation where cables are a mess - desk, workspace, cables for charging devices like phones and cameras, and many more! Print Settings: Layer Height: 0.2mm. Nozzle: 0.4mm. Infill: 10%. Perimeters: 3 Walls.…
- Downloads
- 43
- Likes
- 7
- Rating
- 5
P
PrintablesPerfecT
Radioactive Waste Container
A bit of sanding may be needed, depending on the quality of the print. Print Settings: Layer Height: 0.2mm. Nozzle: 0.4mm. Infill: 10%. Perimeters: 3 Walls. Material: PLA (Dark Color + Glow-in-the-dark). Support: Required. Bed adhesion: No.
- Downloads
- 42
- Likes
- 6
- Rating
- 5
P
PrintablesPerfecT
Flexible Cable Chain - High Quality
Connect the chain to your project with screws/glue/zip ties. For screws, M3 threaded inserts can help. Comment if you need a specific size of cable chain. Print Settings: Layer Height: 0.2mm. Nozzle: 0.4mm. Infill: 10%. Perimeters: 3…
- Downloads
- 40
- Likes
- 7
- Rating
- 0
P
PrintablesPerfecT
Mini Trash Chute for Desk
Connect to the table with weights/glue/zip ties. Slide each tube piece into a ring. Connect the rings with a string. You can make it as long as needed, so it reaches your trash can! IMPORTANT: Print the tubes in vase mode. Print Settings:…
- Downloads
- 37
- Likes
- 10
- Rating
- 0
P
PrintablesPerfecT
Double-Sided Tweezers
Print Settings: Layer Height: 0.2mm. Nozzle: 0.4mm. Infill: 10%. Perimeters: 3 Walls. Material: PLA. Support: No. Bed adhesion: No.
- Downloads
- 33
- Likes
- 6
- Rating
- 5
P
PrintablesPerfecT
Wheeled Mini Trash Can
You will need a thin screwdriver or a drill bit for cleaning axle holes. Use a piece of filament as a hinge. Some glue may help securing the wheels. Print Settings: Layer Height: 0.2mm. Nozzle: 0.4mm. Infill: 15%. Perimeters: 3 Walls.…
- Downloads
- 32
- Likes
- 10
- Rating
- 5
P
PrintablesPerfecT
Gothic Castle of Shadows
Electronics are optional - you can print and use the castle as a decorative model without adding any LEDs or electronics! For those who want to add extra features - print the small rock as well. It hoses a small switch*, for extra control…
- Downloads
- 24
- Likes
- 13
- Rating
- 0
P
PrintablesPerfecT
Glow-In-The-Dark Light Switch Frame
This light switch frame is designed for a light switch 80mmx80mm. When the light is on, you see "ON" written in black letters. When the light is off and it is dark, the glow-in-the-dark filament glows, showing the word "OFF". As a result,…
- Downloads
- 22
- Likes
- 3
- Rating
- 0
P
PrintablesPerfecT
Never Lose The End Of Your Tape Again! - Tape End Finder
We all know that feeling: you're working on a project, and the edge of the tape sticks to the roll and disappears. You waste time picking, scratching, and trying to get it started again. -This model solves the problem once and for all!…
- Downloads
- 20
- Likes
- 3
- Rating
- 0
P
PrintablesPerfecT
Compact Framework 12 Case
Use M2 screws and nuts for securing the case. Printing the Feet in TPU can help secure the case, but PLA can work well too. The switch goes in the big hole in the cover, above the on/off switch of the board. The Placemen of the switch is…
- Downloads
- 18
- Likes
- 20
- Rating
- 0
P
PrintablesPerfecT
Gridfinity 1x1 Divided Bin
Gridfinity-compatible 1×1 bin with a built-in divider, creating two separate compartments for organizing small parts. Useful for storing screws, nuts, electronics components, and other small items while keeping them separated within a…
- Downloads
- 15
- Likes
- 3
- Rating
- 0
P
PrintablesPerfecT
Old Factory Pen & Notes Holder
Print Settings: Layer Height: 0.2mm. Nozzle: 0.4mm. Infill: 15%. Perimeters: 3 Walls. Material: PLA. Support: Required. Bed adhesion: No.
- Downloads
- 13
- Likes
- 6
- Rating
- 0
P
PrintablesPerfecT
B-2 Stealth Bomber Keychain
Print Settings: Layer Height: 0.2mm. Nozzle: 0.4mm. Infill: 15%. Perimeters: 2 Walls. Material: PLA. Support: No. Bed adhesion: 4mm Brim.
- Downloads
- 12
- Likes
- 2
- Rating
- 0
P
PrintablesPerfecT
Kit Card With Useful Items
A multitool the size of a credit card. The kit contains places for a coin and a small note, a fork/grabber/wedge/toothpick tool, a small elastic band, a ruler (cm), two small zip ties, and a flat screwdriver. If you bend the smaller tooth…
- Downloads
- 12
- Likes
- 2
- Rating
- 0
P
PrintablesPerfecT
Storage Railroad Water Tower
Use a bit of glue for securing the tank to the base. Print Settings: Layer Height: 0.2mm. Nozzle: 0.4mm. Infill: 15%. Perimeters: 3 Walls. Material: PLA. Support: Required. Bed adhesion: No.
- Downloads
- 12
- Likes
- 2
- Rating
- 0
P
PrintablesPerfecT
Clip - Perfect For (almost) Anything!
Print Settings: Layer Height: 0.2mm. Nozzle: 0.4mm. Infill: 10%. Perimeters: 3 Walls. Material: PLA. Support: Required. Bed adhesion: No.
- Downloads
- 11
- Likes
- 5
- Rating
- 0
P
PrintablesPerfecT
Sports Car Keychain
Print Settings: Layer Height: 0.2mm. Nozzle: 0.4mm. Infill: 10%. Perimeters: 2 Walls. Material: PLA. Support: No. Bed adhesion: Brim recommended.
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesPerfecT
Measureometer 3000
How to use: 1) Move the probe a few millimeters away from the wall (left side of the device). 2) Take the object you want to measure, and place it between the wall and the probe. 3) Move the probe towards the object until it barely…
- Downloads
- 7
- Likes
- 4
- Rating
- 0
P
PrintablesPerfecT
Mortar Pen Holder
Print Settings: Layer Height: 0.2mm. Nozzle: 0.4mm. Infill: 15%. Perimeters: 3 Walls. Material: PLA. Support: Yes. Bed adhesion: No.
- Downloads
- 6
- Likes
- 1
- Rating
- 0
P
PrintablesPerfecT
Bunker-Shaped Money Box
Print Settings: Layer Height: 0.2mm. Nozzle: 0.4mm. Infill: 15%. Perimeters: 3 Walls. Material: PLA. Support: Required. Bed adhesion: No.
- Downloads
- 5
- Likes
- 2
- Rating
- 0
P
PrintablesPerfecT
Battlefield Map - Note Holder
This note holder resembles a wooden crate filled with maps of a battlefield. Print Settings: Layer Height: 0.2mm. Nozzle: 0.4mm. Infill: 10%. Perimeters: 2 Walls. Material: PLA. Support: Yes. Bed adhesion: No.
- Downloads
- 2
- Likes
- 1
- Rating
- 0
P
PrintablesPerfecT
Prusa Pro Vise
Recommended Print Settings: High infill and wall count are recommended for better strength. TPU grippers are optional and can provide better grip. Assembly: Follow the images for assembly instructions. Some force may be required when…
- Downloads
- 1
- Likes
- 1
- Rating
- 0
These are all currently available results.