Counting matching models…
This is a remix of a model by @LoboCNC . The original screw holder is quite universal: it fits many hand screwdrivers as well as standard hexagonal bits. My problem was that I have some short hexagonal bits that I still wanted to use but…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Why another grdifinity funnel? For the big one: I wanted a large funnel opening, ability to feed a divided bin and easy storage on top of other bins. The small one: I haven't found a funnel designed to work in this direction. Printing:…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
The Original Prusa MINI Enclosure 1.0 has two big holes in the bottom panel. I made these plugs to seal them in the hope to preserve a little more heat inside the enclosure. You can find three different plugs here: covering the whole hole…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
All the credit for this excellent design goes to @Teraflop .
Print approx. €0.45–€0.54 excl. taxPreliminary estimate for one variant
The otherwise great Filament Roller V2 for the 5-liter Sistema drybox was missing a container for silica gel. @KidCe now has made a new version (V3) which has space for the silica but I didn't want to throw away my previous prints. I…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
Update I'm removing the part for the left wall. I have noticed that the holes in the walls of the enclosure are not symmetrical. I have used a hole for the spool holder which does not exist on the left wall. Mounting You will need at…
Print approx. €3.22–€3.94 excl. taxPreliminary estimate for one variant
I really like the original as well as vase-mode cable organizers but they were meant for only for drawers or boxes. I'm trying to make the best use of my desk-mounted Ikea Skadis board so the idea was born to move cables there too. This…
I needed a small holder to keep a (slim) power cable next to an arm supporting the device. It turned out to be easy by using the lockable, print-in-place mechanism by @itsaMeWolf and a simple hexagonal pin. Important: The hex pin fits the…
By chance I own a Rosa3D “masterspool” . They sell their refills wrapped around a cardboard tube and (I think) that tube connects the two halves of this spool. Many other refills come without any tube so I made this simple (and very light…
This thing does not clamp on the cable, the idea is to just hold it next to the board. In other words, it attaches tightly to the board but holds the cable loosely. As you see in the picture I needed it to guide headphone cable.
This model is definitely for you if you want your tweezers accessible from the side. Thanks to hexagonal socket you can tilt them either wat and also mount them vertically. Please notice that this holder does not fit the wall socket…
Did you know that the shaker is the most undervalued musical instrument around a camp fire or at a singalong? Introducing the Soda Can Shaker Plug: Unleash Musical Fun, Together! Attach it to your can, shake, and let the musical magic…
I needed a practical clapboard and writing on a printed surface seemed unpractical so I remixed the original model to a blank one and I'm going to use sticky-notes on it. Please, see the original for hints how to print, some supports are…
The original design by @Német István was created for a board that is thinner than Ikea's and this remix changes only this one dimension. I have tested this print and it fits the Ikea board thickness – see photo. This design has little use…
Update: I'm uploading pre-configured backplates and hooks so you can mix, match and print what you need without messing with the model in Fusion :) Pick one plate with the required space between the hooks. The dxx in the plate file name…
This is a trivial model to reduce the diameter of the hole that a steam knob goes through. I printed it in TPU and it fits very easily. I made the lip that goes on the other side of the front so small that I suspect a stiffer material…
I thought my cheap brass brush would be common and I would find a suitable holder. Apparently it is not that common, so I made one. Please notice that this holder does not fit the wall socket directly . It matches the hexagonal socket of…
I had no immediate access to M4 screws to assemble this FlipStop. It turns out a printed one is good enough especially, that the original model called for gluing the screws anyway. Technically, it is not a remix of the original model but…
Original instructions The base requires an M5-.8 hex nut. The knob is built for a M5-.8 hex bolt, 50mm in length. The screw and nut were chosen to be compatible with GoPro's hardware. As a result, you can elect not to print the "Knob" and…
I made this specifically for light and very light spools but a regular one should work too :) All pieces for this holder fit on Prusa Mini plate at the same time – see 3mf file.
The clamps used normally for cutting guide rails turned out surprisingly nice to use on an MFT table so I had to move them closer to my workbench. Tested with Bessey and Festool clamps designed for Festool and Makita rails - see…
I liked the Sonicare Tooth Brush Travel Case by Ryan very much: small, a good fit for the brush, threaded cap… Just one problem… When I travel, sometimes I have to pack before the brush is dry so I prefer my toothbrush holders to be…
I had cables of different diameters coming out of an electronics box that needed securing and this is the simplest solution I could think of. You can easily customize it to fit your needs. The Fusion 360 model is parametrized: each cable…
Design choices: for longer bits, not too dense, so access to bits is easy, round holes instead of hexagonal so aiming is easier. I'm including a STEP file but if you want a different configuration just start with the blank I remixed.…
It is very annoying when these springs are broken so I printed different designs but I kept having problems. Here's why I called this design "unbreakable". When the original broke… I was very happy i had a 3D printer. But the printed…
Edit: I'm uploading: drilling templates to ease the installation a blank (no holes) shapes (STL and STEP) to ease modifications. I needed a permanent fixture for a rod in my wardrobe that wouldn't be boring to look at. Came out vintage…
The numbers are 0.2mm embossed. Use a fine marker to add color.
Mice are as annoying in Europe as they are in US, so we deserve a mouse trap that fits our jars :) This lid will fit a common jar with 82mm opening diameter. The remixed model calls for filament as the pin that connects the ramp with the…
Size: Technically, it is TO 82 twist-off lid. This means, the diameter of the jar opening should be around 82mm including the thread. Why AI-assisted? I wanted to test SolidCraft with Claude Code. It worked pretty well. Much easier than…
Normally, there is a thin insulation sleeve on the handle. In time the end starts splitting and it is really difficult to tilt the kettle enough to pour water out. It was time for a more permanent solution. I've printed this handle with…
You can leave the screwdriver straight on in "pistol" position. In one of three orienations: left, right, center. Grab the "socket_stub" file if you want a different mounting. Top two openConnect slots are locking! It was also an exercise…
Having lived with this remote for quite some time, I needed a specific solution: A convenient place to put the remote so I don't search for it all the time. A holder that makes the remote easy to pick up. A holder that makes it possible…
These are all currently available results.
